DS Dialer

The DS Dialer provides dual telephone line communication between a standalone FACP

or network of FACPs to a central receiving station to report system status. The DS Dialer

mounts in a red enclosure external to a fire panel It uses modular jacks to interface the

primary and secondary phone lines to the public switched telephone network.

The DS Dialer consists of a main circuit board and telephone (POTS) card enclosed

in a red box.

• COMPATIBLE PANELS
• NOTIFIER INSPIRE PANELS: N16E, N16X
• NOTIFIER ONYX PANELS: NFS-320, NFS-640, NFS2-640, NFS-3030, NFS2-3030
• GAMEWELL-FCI E3 SERIES PANEL: ILI-MB-E3, ILI95-MB-E3
• GAMEWELL-FCI S3 SERIES PANELS: SLP-E3
• COMPATIBLE RECEIVERS
• Ademco™ 685 (with 685-8 Line card with Rev. 4.4d software)
• Ademco MX8000 (with 124060V206B and 124063 Line Card Rev. B)
• Silent Knight® 9500 (with version V2.4 receiver and 126047 Line Card Rev. G)
• Silent Knight 9800 (with 124077V2.00 receiver and 126047 Line Card Rev. M)
• Honeywell® FBI CP220FB (with software version 3.9)
• Osborne Hoffman 2000E® (with receiver software version 7301)
• Radionics 6600 (with 01.01.03 receiver software and 01.01.03 line card)
• SurGard MLR2 (with software version 1.86)
• SurGard System III (with software 1.72)
• SurGard MLR-2000 (with DSP4016 and version 1.6 Line Card)
• COMMUNICATION FORMATS
• Ademco Contact ID
• FEATURES AND BENEFITS
• Collects system data from the connected FACP and sends it to the central receiving station
• Serves as a fire alarm communicator to the central station
• Provides dual telephone lines (primary and backup) to ensure communication
• Provides dual telephone line voltage detection
• Employs Ademco® Contact ID protocols
• Recognizes dial tones (350 and 440 hertz typical in most networks)
• Automatically dials programmed central station phone numbers
• Automatic line seizure takes control and disconnects any local premises phones on the same line
• Generate Central Station reports using CLSS Site Manager
• LED status indicators for Lost Panel Connection, and Central Station Handshake Signal, and Communication
• Failure
• Communicates vital system status including:- Independent zone/point alarm, trouble and supervisory- Security, panel off-normal, NAC trouble- AC (main) power loss (2-hour report delay)

• AGENCY LISTINGS & APPROVALS
• The listings and approvals below apply to the HON-DACT-DS.
• In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Contact Honeywell for the latest listings.
• ETL: Control Number - 5025335, Conforms to UL STD 864
• STANDARDS & CODES
• FCC ID: DS Dialer - 1W6AL02ACGWMB
• National Fire Protection Association:- NFPA 70- NFPA 72