Überwachungsbausteine
FMM-1 Intelli Monitor Module
Auslaufmodell
The FMM-1 Monitor Module is intended for use in intelligent, two-wire systems, where the individual address of each modules are selected using the built-in rotary switches. Monitor modules supervise a circuit of dry-contact input devices.
Please sign in to access more documents
Once signed in, you may be able to access additional documents for your account.
Übersicht
Dieses Produkt wurde eingestellt.
Die Produktbetreuung wird von Honeywell bis .. bereitgestellt.
The FMM-1 Monitor Module is intended for use in intelligent, two-wire systems, where the individual address of each module is selected using the built-in rotary switches. It provides either a two-wire or four-wire fault-tolerant Initiating Device Circuit (IDC) for normally-open-contact fire alarm and supervisory devices. The module has a panel-controlled LED indicator. The FMM-1can be used to replace MMX-1(A) modules in existing systems.
Monitor modules supervise a circuit of dry-contact input devices, such as conventional heat detectors and pull stations, or monitor and power a circuit of two-wire smoke detectors. FMM-1 is a standard-sized module (typically mounts to a 4" [10.16 cm] square box) that supervises either a Style D (Class A) or Style B (Class B) circuit of dry-contact input devices. . Monitored circuit may be wired as an NFPA Style B (Class B) or Style D (Class A) Initiating Device Circuit. A 47K Ohm End-of-Line Resistor (provided) terminates the Style B circuit. No resistor is required for supervision of the Style D circuit.Features & Benefits:
Monitor modules supervise a circuit of dry-contact input devices, such as conventional heat detectors and pull stations, or monitor and power a circuit of two-wire smoke detectors. FMM-1 is a standard-sized module (typically mounts to a 4" [10.16 cm] square box) that supervises either a Style D (Class A) or Style B (Class B) circuit of dry-contact input devices. . Monitored circuit may be wired as an NFPA Style B (Class B) or Style D (Class A) Initiating Device Circuit. A 47K Ohm End-of-Line Resistor (provided) terminates the Style B circuit. No resistor is required for supervision of the Style D circuit.Features & Benefits:
- Built-in type identification automatically identifies this device as a monitor module to the control panel
- Powered directly by two-wire SLC loop, No additional power required
- High noise (EMF/RFI) immunity
- SEMS screws with clamping plates for ease of wiring
- Direct-dial entry of address 01 - 159 on Flash Scan loops; 01 - 99 on CLIP loops
- LED flashes green during normal operation (programmable option) and latches on steady red to indicate alarm
- UL: S635
- ULC: S635
- FM Approved
- CSFM
Spezifikationen
Andere
- Brand
- NOTIFIER
- System Sensor
- Product Type
- Monitor Module
Andere
- Brand
- NOTIFIER
- System Sensor
- Product Type
- Monitor Module
- Brand : NOTIFIER|System Sensor
- Product Type : Monitor Module
