Power Supply Unit is of 3A assembly Kit includes complete power supply unit, interconnection cables and spare fuses.
The 6U blind cover for mounting the 4.5A power supply or 7A
The 6U blank cover for 19 rack mounting.
The Rack Blank Cover with Printer provision (Adapter plate and cover).
The ID3000 is a flexible, modular control panel, built from various option modules. Each module is supplied with required mounting screws, connection cables, washers etc. and installation instructions.
Extended Bezels are double extended bezel with semi-flush mount bezel for double extended height back box
Semi Flush Mounting Bezel for ID51, ID61, ID2000 and ID3000 standard back box.
Booster Kit is located in an open, rear compartment of the main chassis. The module must be fitted before installing the main chassis in the back box. The module is secured to the main chassis using four M4 x 8 SEM screws.
CAB-C1 Extended Back Box Kit includes a single “extended height” back box powder coated in RAL 7021 extra fine texture. Will hold batteries up to 17Ah. Suitable for use with single extension. Compatible with internal PSU3A or external PSU7A.
Deep Extension Back Box Kit includes deep back book with extra depth for additional battery space. The box has an extra fine texture RAL 7021 finish.
Notifier Dual Enhanced Loop Interface Board is equipped with microprocessor and will continue to function in case control panel fails.
Dual Loop Module Kits by Notifier PCB for additional 2 loops, and plug in cable connector with Max. three modules perpanel also Maximum of 512input devices per panelusing standard LIBs.
Extended Back-Box Kits are double extended back box kit with double “extended height” back box powder coated in RAL 7021 extra fine texture. Includes power in connectors. Will hold batteries up to 17Ah.
Extended Deep Back-Box Kits are double “extended height” back box with extra depth for additional battery space, powder coated in RAL 7021 extra fine texture
Extension Chassis with intergral printer module fitted
Extension Cover Blanking Plate Kit for extension cover moulding where no extension chassis is required. May be used for customisation such as mounting of plant switches. Finished in extra fine texture.
Interface card that allows ID3000 control panels to be connected to the ID2net network using fiber or optical cable, recommended for distances greater than 500 meters or for industrial environments.
ID3000 Extension Chassis Kits are 64 zone led extension chassis kit with Led display board for zone 1 to 65 to indicate fire and fault, disablement, test and also accept integral printer
Isolated RS232 Module Kit includes PCB for isolated RS232 port for OEM interface, 80 column printer etc. The module uses 1 panel COMMS port.
Includes moulding, hinges for user interface door, push clip fasteners, Notifier label and hex fixing tool.
3U Rack Blank Cover comes with mains/gland termination.
NF Series Printer Kit includes thermal printer with power supply unit and roll of thermal paper. No RS232 interface module is required
Display Kit for NF300. It Includes display plate with 240 × 60 pixel LCD and assembly kit.
NF3000 Extended & Deep Rear Case from Notifier comes with an extra fine texture, deep RAL 7021 housing with an extension for additional batteries. Can be used with the simple extension. Compatible with internal and external PSU power supplies.
The Notifier RS485 Communication Card kit is used for networking Notifier ID61, ID62, ID2000, ID2002, ID3000 & ID3002 panels to a repeater panel.
Notifier Rack Mounting Assemblies are 6 U 19in adapter plates and covers used for standard chassis, printers and 256 zone display modules.
The Floor mounted only back box with extra depth for additional battery space. Powder coated in RAL 7021 extra fine texture. Includes power in connectors. Will hold batteries up to 78Ah. Compatible with PSU7A (020-579).
Standard Back Box Kit includes a basic back box powder coated in RAL 7021 extra fine texture and power in connectors. Will hold batteries up to 12Ah. Compatible with internal PSU3A or external PSU7A.
Extension Cover Kit includes moulding, hinges for user interface door, push clip fasteners and printer slot covering label.
Standard Extension Back Box Kit includes a basic back box powder coated in RAL 7021 extra fine texture. Will hold batteries up to 17Ah.
Includes complete power supply unit assembly, interconnection cables and spare fuses. Mounts inside any deep back box kit or the remote battery / PSU enclosure kit and charges up to 130Ah battery capacity. PSU DTP / Booster required in main chassis.
Start your search with category name, product name, part number, etc.
Copyright © 2022 Honeywell International Inc.