Switch and Wiring Loom are designed as spares for SAFE which is introduced as an engineered solution for your building and to avoid the risk of generating multiple false evacuations.
200 Series Isolator Base provides short circuit protection in communication loop
The 34000 S-Quad adapter base provides a simple and cost effective solution for the replacement of ageing 34000 range sensors with current S-Quad Sensors.
6500-SMK surface-mount kits are intended for use with beam detectors to mount transmitters and receivers when using 6500-MMK multi-mounting kits.
ASD ADPTR 25MM ABS TO 22MM COPPER
Socket with Insulator and Output for External Indication.
Angle Brackets by Gent are designed for use in areas where beam detector will not be installed to a vertical surface, or where the beam path is not perpendicular to the installation surface.
Anti Condensation Film is an easy applicable film that provide long time resistance to condensation on the acrylic Emitter lens
Anti-Condensation Film is used for OSID-EH housings. An easy applicable film that provide long time resistance to condensation on the glass fronts.
B401 plug-in detector bases are used with System Sensor® smoke and heat detectors. These bases make detectors more versatile than equivalent direct-wired models.
S-Quad Beam Sensors provides an enhanced solution for linear beam detection for applications where point detection is either not practical or economic.
Gent by Honeywell’s S-Quad Beam Sensors provides an enhanced solution for linear beam detection for applications where point detection is either not practical or economic.
Beam Sensor Transmitter mounted on a base fixed to either bracket allows the detection of smoke over distances from 2 m to 100 m each mounted on a base fixed to either bracket.
CLSS Bar Codes - Roll of 1000
DST metal sampling tubes may be installed from the front or back of System Sensor® HVAC duct smoke detection and monitoring products. The tubes lock securely into place and can be removed by releasing the front or rear locking tab.
Duct Sensor is an accessory designed for the Vigilon System Sensors.
Detector cover for S-Quad / IQ8Quad with built-in alarm sounder
The ECO 1000 deep detector bases are used in the ECO1000 series detectors with fire alarm control panels.
External Filter by Esser is used in all FAAST Systems
Single or Dual Channel Accessories box for FAAST LT-200 Standalone
Sampling Hole Clips are designed to alleviate such potential issues, by providing a clear, visual indication of sampling point location and its associated hole size.
ISP-406 is used as a cover removal tool for IAS or ILS
Xtralis ICAM Accessories offers Medium and fine filter elements for the internal filters inside the ICAM IFT, ICAM IAS and ICAM ILS series detectors. Replacement filters elements are available in pack of 10 with Black colour
With the IQ8 Wireless Base the wireless component is located in the base onto which the respective fire detector is placed.
SenTRI metal interface housings are used for single channel SenTRI system interface modules.
Label-smoke detector pipes are manufacture from ABS (Acrylonitrile Butadiene Styrene), very lightweight, versatile material, guaranteeing you easy and professionalinstallation.
Light shield is available for installation in areas where direct sunlight cannot be avoided
Duct Mounting Bracket
Non-return valve is designed for use with the FAAST aspiration smoke detection system.
ASD Manual Blow Through Valve Set
OSID wire guards are steel cages designed to protect OSID imagers and emitters from vandalism and accidental damage. The cages are constructed of heavy gauge steel wire with a corrosion-resistant polyester coating.
OSID environmental housings protect OSID imagers and emitters from dust and water ingress in industrial environments. The glazed housings are made of ABS and the glass windows cause minimal attenuation of the UV and IR beams.
Installation kits for OSID detectors include a laser alignment tool, a test filter, a PC cable, a cleaning cloth, and a manual.
OSP-002 laser alignment tools allow for quick alignment of OSID detectors. They also align and lock the eyeball and activate the emitters when locked.
OSP-003 acrylic test filters are intended for use with OSID detectors.
SEN-INT-ACDIN Interface is a 240V output interface and it comes with a DIN Rail mounting kit.
The B400 Sries Plug-in Detector Bases are intended for use in 2-wire systems with screw terminals provided for power, ground, and remote annunciator connections.
S-Quad accessories is designed exclusively for S-Quad Multi-Sensor and Visual Alarms Device.
S-Quad Mounting Plate is an installation base used for installing S-Quad Multi-Sensor.
The S4-700 Base is designed to accept the range of combined detection and alarm devices.
The SMK400 Surface Mounting Adaptor Kits allow 100, 200, 400 or 500 series plug-in detectors to be surface mounted when the ceiling construction prevents the use of conventional recessed metal electrical junction boxes.
Sampling Hole Clip delivers reliable & accurate sampling hole sizes that are fast to install & easy to locate. Each clip is colour-coded to indicate a specific hole diameter providing an instant visual guide & removing the need for closer inspection.
Semi-flush fixing kit is designed to mount an S-Quad device. To semi-flush mount a special housing must be used which consists of a main assembly and a trim ring.
Beam angle bracket accessories are used for SenTRI beam sensors.
Parallel Bracket is the accessory for mounting the pair of beam sensors.
SenTRI DIN rail mounting kits are used in SMS SenTRI range of addressable interface modules.
Gent Nano Spares Pack
The ES Detect automatic detector is an intelligent nonaddressable detector specifically designed for operation on conventional detector groups
The accessories are designed to serve the purpose of supporting the main product.
VESDA-E Filter Cartridge is field replaceable filter of VESDA-E detectors. It filters coarse particles
VESDA® filter cartridges are used to replace filter cartridges in VESDA VLC, VLF, VLP, and VLS detectors.
VSP 850 in-line filters provide Xtralis® customers the ability to address a wide array of harsh environments with high levels of airborne contaminants in a simple and cost-effective manner.
Vigilion Beam Sensor Recievers are a part of Vigilon’s loop powered technology which allows 16 beam pairs to be connected to the same loop circuit, each covering a distance of up to 100m.
Start your search with category name, product name, part number, etc.
Copyright © 2022 Honeywell International Inc.