Control Panel Cabinets, Housing & Covers
00PLEX-2 dead front panels are used in jurisdictions that require single button operation of the reset and silence functions on the fire alarm control panel (FACP).
The 17021 key sets are for use with NBG-12LX addressable manual pull stations.
The 17044 snap-in locks are for use with Fire-Lite® fire alarm control panels.
17051 Power Key Set
The enclosure has a glazed lockable door and an internal swing frame to allow easy access to the back of the sub rack.
257 covers are extension cover kit for zone display module
3U blank cover for 19in rack mounting
ZX1/2Se retrofit 4 line display kit including display plate and overlay.
Operator keys are for use with Silent Knight® 5208 fire alarm control panels (FACPs).
Flush-mount trim rings are for use with Silent Knight® IntelliKnight® 5600 fire alarm control panels (FACPs).
Dead front panels are for use with Silent Knight® IntelliKnight® 5700 fire alarm control panels (FACPs).
005860T surface-mount trim rings are for use with Silent Knight® 5860 remote annunciators. Red and gray options are available.
Annunciator bezels are red and for use with Silent Knight® 5860R remote annunciators.
6700 cabinets are for use with Silent Knight® 6700 fire alarm control panels (FACPs).
Cabinets are for use with Silent Knight® 6808 fire alarm control panels (FACPs). These cabinets are red.
6820 cabinets are for use with Silent Knight® 6820 fire alarm control panels (FACPs).
6820EVS cabinets are for use with Silent Knight® 6820EVS fire alarm control panels (FACPs).
71252 end-of-line (EOL) resistors are for use with NOTIFIER® and Fire-Lite® fire alarm control panels (FACPs). These resistors are 4.7K ohm and 1/2W.
90286 module mounting kits are required to install addressable modules on HPF24S Series power supply main circuit boards.
90474 mounting kits are required to attach an addressable module onto the control circuit board.
9600 universal brackets are for use with Fire-Lite® MS-9600 fire alarm control panels (FACPs).
Flush-mount boxes are for use with Fire-Lite® ACS Series annunciators. These enclosures provide remote mounting of a single annunciator module.
Pole-mount brackets are for use with ADPRO® PRO passive infrared detectors. They include stainless steel straps.
ANN-MBRLY mounting brackets are for use with NOTIFIER® NFW2-100 fire alarm control panel (FACP) applications.
ANN-SB80KIT surface-mount annunciator box kits are installed with Fire-Light® ANN-80 annunciators.
The 6U blind cover for mounting the 4.5A power supply or 7A
The 6U blank cover for 19 rack mounting.
The Rack Blank Cover with Printer provision (Adapter plate and cover).
Heat conductive compounds are for use with Aquastat® temperature controllers. They improve heat conduction in immersion well applications where the bulb does not fit tightly.
BB-100 backboxes are for use with NOTIFIER® NFS2-3030 fire alarm control panels (FACPs) and are used to mount up to two 100AH batteries and power supplies.
Snap-in locks are for use with Fire-Lite® BG-8 Series manual fire alarm call points and prevent restoring the activated alarm to normal except by use of a key.
Battery box or mounting enclosure which has Size 500 x 500 x 185mm (H x W x D).
Bezel For Pearl Back Boxes are flush mount dress rings offers a practical way of flush mounting the Pearl panel.
Extended Bezels are double extended bezel with semi-flush mount bezel for double extended height back box
Semi Flush Mounting Bezel for ID51, ID61, ID2000 and ID3000 standard back box.
CAB-C1 Extended Back Box Kit includes a single “extended height” back box powder coated in RAL 7021 extra fine texture. Will hold batteries up to 17Ah. Suitable for use with single extension. Compatible with internal PSU3A or external PSU7A.
CAT 30 Lock with Key
CH-6 chassis mount up to six modules in System Sensor® BB-6 enclosures.
CHS-4L chassis are for use with NOTIFIER® fire alarm control panels (FACPs). They are low-profile, 4-position chassis and mount two AA-30 amplifiers.
Calibration wrenches are for use with T991, T631, T675, T678, T6031, T475, T4031, T4054, T6054, and T6064 remote temperature controllers.
Communication Modules are use in the ZX series intelligent multi-protocol fire alarm control panels & These optional modules add optically isolated communication ports to the ZX series control panels
Compact 24hr inner door assembly
Control panel cabinet keys are for use with Silent Knight® 5000 entry system control panels. These keys are made of metal.
Horizon series of conventional control panels has been developed to provide a simple and reliable solution to the demands of today’s fire detection solutions.
DP-2 dead front dress panels are for use with Fire-Lite® 411UDAC fire alarm control panels (FACPs). They restrict access to the system wiring but allow access to the membrane switch panel.
DP-51050 dress panels are for use with Fire-Lite® MS-5UD/MS-10UD Series fire alarm control panels (FACPs). They restrict access to the system wiring but allow access to the membrane switch panel.
DP-9692 dress panels are for use with Fire-Lite® MS-9200UDLS fire alarm control panels (FACPs). They mount to the inside of the cabinet and restrict access to the system wiring while allowing access to the key panel.
DP-ES-R dress panels are for use with NOTIFIER® fire alarm control panels (FACPs). They mount to the inside of the cabinet and restrict access to the system wiring while allowing access to the key panel.
DX Spare Keys are used for DX series Keyswitch kits and are available in a pack of 5.
The Morley-IAS DXC Flush Bezel Kit used for Morley-IAS DXC2 or DXC4 panel and the kit includes additional extension back box. Extension box is used to accommodate larger batteries, relays or other equipment.
DXC replacement door is available for DXc control panels. This replacement door is fits with all three variants of the panel, DXc1, DXc2 & DXc4 and is supplied complete with display PCB, fascia label, ribbon cable and lock.
The DXc Blank Covers are a part of cover kits for DXc series control panels.
DXc custom key plate cover kit accessories are used to replace the blank cover supplied with the DXc2/4 control panels or used with the extension back box.
The DXc Extension Box Increases the enclosure size of a DXc1, Dxc2, or Dxc4 control panel to accommodate larger batteries, relays or other equipment by fitting the extension back box.
Deep Extension Back Box Kit includes deep back book with extra depth for additional battery space. The box has an extra fine texture RAL 7021 finish.
TR-6-R trim rings are for use with Fire-Lite® ECC-RPU remote page units.
EQBB backbox assemblies are for use with NOTIFIER® EQ Series cabinets. These assemblies are available in red or black and feature two, three, or four tiers.
EQDR door assemblies are for use with NOTIFIER® EQ Series cabinets. These vented doors are available in red or black, and feature two, three, or four tiers.
Extended Back-Box Kits are double extended back box kit with double “extended height” back box powder coated in RAL 7021 extra fine texture. Includes power in connectors. Will hold batteries up to 17Ah.
Extended Deep Back-Box Kits are double “extended height” back box with extra depth for additional battery space, powder coated in RAL 7021 extra fine texture
Extension / Large Back-Boxes for new Pearl installations, Surface or Flush mounting, includes cover and space for 17Ah/38Ah batteries.
Morley - IAS' Extension Back Box Bezels are flush mounting bezels that fits a DXc1 panel with additional extension back box.
Extension back boxes for existing surface mounted Pearl installations. They includes cover, panel dress plates and space for 17Ah batteries.
Extension Cover Blanking Plate Kit for extension cover moulding where no extension chassis is required. May be used for customisation such as mounting of plant switches. Finished in extra fine texture.
An external printer may be connected to the control panel during commissioning
Fire System Document boxes from Notifier by Honeywell are designed to complement any life safety system. The robust, lockable steel enclosure offers safe storage and fast access to essential documentation.
TR-1 trim ring assemblies are for use with Gamewell-FCI® Flex 4-zone fire alarm control panels (FACPs). They allow semi-flush mounting of the cabinet. Red and black options are available.
TR-CE trim ring assemblies are for use with Gamewell-FCI® Flex six-zone fire alarm control panels (FACPs). They allow semi-flush mounting of the cabinet. Red and black options are available.
Flush Bezel Kits by Honeywell are covers can be purchased to suit your needs and include a blank cover, Customer key plate and 80 Zone LED expansion cover.
Flush Bezel kit for DXC1
Flush Fixing Kits are flush mounting plate for gent xenex conventional fire detection panels
Flush Mount Dress Rings are installation kit for pearl smart fire alarm centre which includes 19in kit and finishing edge.
NANO-FLUSH from Gent is a Flush Mounting Bezel which has been designed for the Gent Nano-24 panel. The bezel will cover any imperfections in the wall when this has been cut to fit the panel.
The (VIG-24-FLUSH) Flush mounting kits can be used for Gent Vigilon Plus VIG-24 fire alarm panels and network node.Control Panels may be semi-flush mounted using a semi-flush surround.
Replacement Terminal Covers - Gateway (Small)
Extended Terminal Covers - Gateway (Large)
Thermostat calibration tools are for use with HP970/972 pneumatic humidistats.
Sampling Hole Clips are designed to alleviate such potential issues, by providing a clear, visual indication of sampling point location and its associated hole size.
The 797-062 is a Semi flush mounting kit for ZX5(S)e control panel.
Housing kit for IQ8FCT XS For surface mounting of up to 6 transponders IQ8FCT XS (Part No. 808606), consisting of housing back and cover.
ID3000 Extension Chassis Kits are 64 zone led extension chassis kit with Led display board for zone 1 to 65 to indicate fire and fault, disablement, test and also accept integral printer
Semi Flush Mounting Bezel for ID62 available in grey and black colour.
IDP-ACB module cabinets are for use with Silent Knight® IDP-Zone-6 interface modules. They have a built-in chassis that will accommodate one or two modules.
Flush Mounting Bezel for IDR repeaters.
Replacement Screw Terminal Blocks - Smart IO
Replacement Small Terminal Covers - Smart IO
IPENC external enclosures are for use with NOTIFIER® IPDACT internet monitoring modules. Includes IPBRKT mounting bracket. Red and black options are available.
Intelligent System Spare Parts are text insert label kit for intelligent addressable fire alarm panels
Intelligent systems spare keys are used for NF30/50/3000 intelligent panels.
IntelliKnight® IP communicators monitor Silent Knight® fire alarm panels.
Vigilon’s range of loop powered interfaces offer a comprehensive range of connectivity options with critical plant and other safety systems
Ivory faceplates are sold in packs of ten. All faceplates are unmarked (without logos).
KNOB replacement knobs are for use with TR23 wall modules.
KeyMate™ key fobs contain advanced passive proximity technology small enough to fit on a key chain.
These copper wells and inner filters are for use with LP914 pneumatic temperature sensors.
Duct mounting clips are for use with LP915 pneumatic temperature sensors. They are used for averaging capillary.
Knob and scale plate assemblies are for use with LP916 pneumatic thermostats.
Large Interface Enclosures are used to mount S4 Interface modules. It consist of Plastic Box with dimension 245mmx227mmx77mm.
The Loop Powered Enclosures as the name suggests are metallic enclosure with 20 and 25mm knockouts for Vigilion's Loop Powered Intefaces.
M200 Addressable Modules Mounting Boxes has unique mechanical design which allows each module to be mounted in either a wall box, on a DIN rail or within any type of enclosure.
Honeywell MAXPRO Access MPA1 significantly decreases installation time and costs while delivering a secure, remotely managed access control solution, standalone or integrated with MAXPRO Cloud.
Accessories compatible with MPA1
MULTIMOD-BRKT mounting brackets are for use with Fire-Lite® ROME Series relay option module enclosures. They are used to install the modules inside the fire alarm control panel (FACP) backbox.
3U Rack Blank Cover comes with mains/gland termination.
Mounting kit for ALR microphone Part No. 581316.
020-835 is a Spare key switch and keys for Morley-IAS repeaters.
Morley-IAS Extension Box & Covers By Honeywell is a DXc extension back box
The Key and cylinder kits are for DX CONNEXION control panels that allows the user to access level 2 function keys without using a password.
Multi-Mount Enclosure can hold two standard size modules or two 10 way I/O modules or two main relay modules.
Multi-mount metal enclosures are capable for housingmmX-10ME, CMX-10RME or MCX-55 modules.
Plastic enclosures are for use with NETAXS-123 hybrid access control panels. They are made of high impact plastic and contain wiring access holes/knockouts.
The new Galaxy Flex range expands the product offering to the security market and offers total flexibility that translates into a number of benefits for installer and end users.
Display Assemble Kit for NF2000 includes a display plate (2× 40 LCD).
Display Kit for NF300. It Includes display plate with 240 × 60 pixel LCD and assembly kit.
NF3000 Extended & Deep Rear Case from Notifier comes with an extra fine texture, deep RAL 7021 housing with an extension for additional batteries. Can be used with the simple extension. Compatible with internal and external PSU power supplies.
NXENCM metal enclosures are for use with NETAXS-123 hybrid access control panels. They contain 19 wiring access holes/knockouts.
Optional Cover from RIO is plastic accessory
ID61 & ID62 Replacement PCB Assembly Kit includes Lcd and Membrane.
PRO22CVT1 data converters serve as an interface located between the computer and the PRO22IC intelligent controller. The device converts the RS-232 data coming from the serial port on the PC into RS-485 data.
Enclosure for Pro-Watch Controler
Q651 switching subbases are for use with T6051A heavy duty thermostats. These subbases provide positive 'off' switching of the system.
RBB surface-mount accessory cabinets can be used if the main control panel backup batteries are too large to fit into the main control panel cabinet.
Setpoint knobs are for use with RP920 pneumatic controllers.
Rack Mount Kit for Pearl panel enables the Pearl to be mounted in a 19in rack.
Rack mount kit fits a DXc2 panel or DXc4 panel.
Surface-mount backboxes are for use with Fire-Lite® ACM-8RF relay modules.
The Floor mounted only back box with extra depth for additional battery space. Powder coated in RAL 7021 extra fine texture. Includes power in connectors. Will hold batteries up to 78Ah. Compatible with PSU7A (020-579).
Remote mounting kits are for use with Silent Knight® 5815XL signaling line circuit (SLC) expanders.
Replacement Moulding/Cover Plate for Xenex Control Panel.
S-Quad Duct Mounting Brackets are designed for the S-Quad Duct Smoke Sensor. They are available to mount the detector on circular and insulated ducts.
SK-2190 accessory cabinets are for use with Silent Knight® SK-5217 zone expanders.
SK-NIC-KI accessory install kits are for use with Silent Knight® SK-NIC network interface cards.
SK-SCK seismic compliance kits are for use with Silent Knight® fire alarm control panels (FACPs).
SMB500 surface-mount boxes are for use with System Sensor® modules when flush or recessed mounting is not possible.
SMC SenTRI FOUR Flush Surround is 4 loops control panel for analogue addressable fire detection and alarm system.
Semi Flush Mounting Bezel for ID50 & ID60 available in grey and black colour.
SenTRI 2 inner door assembly used as spare for SenTRI 2 control panels.
SenTRI 2 outer door assembly used as spare for SenTRI 2 control panels.
Spare Pearl Door Assemblies are spare door modules for pearl smart fire alarm centre.
VIG-FLUSH-SS is stainless steel flush mounting kit for Vigilon main control panel.
Standard Back Box Kit includes a basic back box powder coated in RAL 7021 extra fine texture and power in connectors. Will hold batteries up to 12Ah. Compatible with internal PSU3A or external PSU7A.
Extension Cover Kit includes moulding, hinges for user interface door, push clip fasteners and printer slot covering label.
Standard Extension Back Box Kit includes a basic back box powder coated in RAL 7021 extra fine texture. Will hold batteries up to 17Ah.
SuitePRO™ adapter plates are for use with SuitePRO thermostats.
Remote pipe sensors (20K ohm) are for use with SuitePRO™ TB6575/TB8575 digital fan coil thermostats.
Surface-mount trim rings are for use with Silent Knight® remote annunciators.
POLE HWKIT are fibreglass extendable pole to perform sensor survey next to high rise ceilings which can extend up to 5m.
Decorative Plate for TC-TR Series
Thermostat tool kits are for use with TP900/970 Series pneumatic thermostats.
TP970/9600 Series pneumatic thermostat accessories include backplate assemblies, filter assemblies and cartridges, plugs, resistor blocks, wall plates, mounting hardware, thermostat cover kits, satin/chrome cover assemblies, and more.
TR-ANN surface-mount trim rings are for use with NOTIFIER® N-ANN-100 remote fire annunciators. Red and black options are available.
Thermostat setpoint knobs are for use with T6051 and T6052 heavy duty line voltage thermostats.
19in rack enclosures are designed to house up to 20 display and programmer modules in a wide variety of configurations to suit the particular requirements of a site where centralised control and monitoring of the VESDA system is required
Vigilon 1-6 loop control panels can accommodate up to 200 devices on each loop. The panel is available with 24 or 72 hour standby facility. Advanced networking options allow multi-domain networks of up to 250 panels.
Vigilon’s range of Loop Powered Interfaces offer a comprehensive range of connectivity options with critical plant and other safety systems.
Vigilon Repeat Panel Frames are used for VIG-RPT-72 Repeat Panel. These frames have Stainless Steel finish.
Stainless Steel Replacement Door for Gent Vigilon Repeater Panel.
WEBs-AX™ enclosures are for use with WEB-201 and WEB-600 controllers.
The Honeywell’s A045 is a Wall Mount plastic white used for Galaxy TouchCenter Plus. Galaxy TouchCenter Plus is a colour touchscreen keypad through which users can easily interact and operate.
XS814 auxiliary terminal blocks are for use with EXCEL® 5000 systems. They mount onto already installed pluggable I/O modules in order to equip them with additional terminals.
XSU screw-type terminal sockets are for use with Excel 800 systems.
Glass front door kit are use with the ZX5e intelligent addressable control panel.
ZX Range Spare parts are used in ZX series control panels
The ZX range of 1, 2 or 5 loop modular, scalable intelligent fire alarm control panels are suitable for protecting all types of medium to large properties.
Battery box or Mounting enclosure for ZX1/2Se control panel by Morley IAs
Back Box for ZX10SE available in metal work only
The Morley IAS by Honeywell presents ZX5SE series semi-flush mounting bezel kits which forms a part of ZX5SE fire alarm control panel. They are used for the Morley IAS active & passive repeater panel range.
ZX5SE Door is a spare part for intelligent fire alarm control panel.
ZXSe Mounting Brackets are 'L’ shaped to fit peripheral pcb’s into Zxe/ZX5e/ZXSe
C58-379-00 dust covers are for use with System Sensor® i³™ Series photoelectric smoke detectors.
Start your search with category name, product name, part number, etc.
Copyright © 2021 Honeywell International Inc.