005815XL signaling line circuit (SLC) expanders increase the capabilities of IntelliKnight® fire control panels (FACPs) by allowing an additional 99 modules and 99 detectors or 127 addressable devices to be attached to the system.
4190SN addressable V-Plex® modules are 2-zone expanders which allows use of the available expansion zones provided by ADEMCO controls that support V-Plex devices.
4100SM serial interface modules can be used as direct-wire downloading devices for compatible control panels, interface for serial printers or PCs, or interface of a control panel to third-party home/facility automation hardware and software.
4193SN micro-miniature V-Plex® 2-zone expanders make any hardwired contact device V-Plex ready.
4193SNP addressable V-Plex® input expanders are ideal for systems where additional zone inputs are required.
4208SN 8-zone remote point modules allow the use of available expansion zones on Honeywell VISTA® controls that support V-Plex® polling loop devices.
4208SNF addressable universal expander modules provide six Class B and two Class A expansion zones to any VISTA® Fire/Burg control panel that supports serial V-Plex® polling loop devices.
4208U universal 8-zone remote point modules allow the use of available expansion zones on ADEMCO controls that support V-Plex® polling loop devices.
The 4219 expander modules add up to eight normally closed or eight end-of-line resistor supervised zones to compatible controls/communicators VISTA-15P, VISTA-20P, and VISTA-21iP.
4232CBM connected building modules are designed to support VISTA® security panels with a variety of Honeywell and third-party hardware and software products. These modules are intended for applications such as home or building automation.
The 4297 V-Plex® loop extender modules receive signals from the control panel via an input loop, and then re-transmit boosted copies of these signals via an extension loop.
6000 Series panel SLC loop expander functions with Silent Knight® devices.
DXc Control panels are supplied without zone LEDs. Two zone LED kits are available that include PCB, ribbon cable, zone number labels & fixings. Zone LED PCB is fitted to the lower half of the front door as shown on the right.
ADPRO® iFT External Ethernet PoE Extension Module
Booster Kit is located in an open, rear compartment of the main chassis. The module must be fitted before installing the main chassis in the back box. The module is secured to the main chassis using four M4 x 8 SEM screws.
CIPer Model 30 small (7 I/O) and large (20 I/O) expansion modules.
DXC Compact Mimic Driver allows geographic floor map zonal indicators to be built for situations where increased clarity of the fire location by the standard numbered zonal indicators. It provides 16 LED outputs.
EVS-CE4 4-Circuit audio expanders mount inside the cabinet. Standby current is 20 mA and alarm current is 180 mA.
EVS-SW24 24 switch expanders are for use with IntelliKnight® fire alarm control panels (FACPs) and emergency voice systems.
A range of covers can be purchased to suit your needs and include a blank cover, Customer key plate and 80 Zone LED expansion cover
FFT-24 expander boards allow an additional 24 zones to Silent Knight® fire fighters telephone control systems.
Four way relay interface is I/F Plastic Box with maximum operating Voltage 125 Va.c. or 150 Vd.c.
Honeywell's Galaxy range includes Card sReader interfaces which allows a very simple and quick way for the user to add new Access Control cards to the Database via User management Suite software.
Galaxy Module A060 are One Way Relay Interface One way general purpose relay interface.
Galaxy RIO are Remote Input/Output Modules which Provides zone and output expansion for Galaxy Systems.
The GalaxyFlex Trigger Module acts as an output expander which allows the Flex panel to easily activate and control third party devices such as communicators, CCTV, lighting and access control systems without the need for an additional controller.
The Galaxy® Dimension series of security systems is a fully integrated intrusion and door control security solution for mid to large commercial security installations.
Indication Expansion Modules by Morley-IAS are designed and constructed around proven and reliable microprocessor technology & simple approach has produced modular, scalable fire alarm platform suitable for protecting all types of premises.
The Morley IAS 795-097 is a panel programming software kit designed for use with the Morley DXc Dimension fire alarm panel range. It supports Apollo, Hochiki and System Sensor Protocols.
Programmable Sounder CardThe 4-way sounder card consists of 4 supervised sounder outputs built on a single printed circuit board Each
sounder output provides a supervised 24V DC polarity reversal circuit.
N-1000-IV-X Access Control Panel PCB
Notification appliance circuit/relay expander (NAC-REM) modules add two Style Z (Class A) NAC circuits (NACs 3 and 4) and two programmable Form C relays (relays 3 and 4) to fire alarm control panel MS-5210UD/MS-5210UDE.
NXD1OP kits are NetAXS™ web-based access control reader kits that consist of an NXD1 add-on board and OmniProx™ reader. When paired with an NX1P one-door compact plastic enclosure and a second reader, NXD1OP kits facilitate two-door systems.
Notifier PSU 7A optional status indication kit unit includes complete assembly and interconnection cables. Mounts on the side of the externally mounted Power Supply Unit Kit and gives status indication of the PSU.
Prowatch 7000 series Add-on Kits allow are expnasion modules for monitoring and controlling addional openings
The new RF Portal wireless system expander module enables a total wireless offering for Honeywell’s Galaxy Dimension and G2 intruder alarm systems. There can be up to eight RF portals in an installation.
ECC-RTZM remote telephone zone modules allow for secure access to the ECC-50/100(E) emergency command center via cell phone or a remote telephone means.
SK-2/SK-4 fire alarm control panel (FACP) module options include transmitter modules, interface modules, and zone relay modules.
SK-5217 zone expanders provide 10 additional Class B (Style B) zones.
SKE-450 Voice Evacuation Control Panel PC Board
ANN-S/PG interface modules connect either a serial or parallel printer with a compatible fire alarm control panel (FACP) to print real-time logs of system events, detector status reports, and event histories.
Morley-IAS introduces Two Loop Expansion Cards which are used in the Morley-IAS DX Connexion panel. The Morley-IAS DX Connexion panel is ideally suited for use in the protection of small to medium sized buildings.
SPX-2-W Wiegand extenders extend Wiegand communications up to 10,000 ft using a single twisted pair.
Zone LED kits are available that include PCB, ribbon cable, zone number labels & fixings. Zone LED PCB is fitted to the lower half of the front door.
Start your search with category name, product name, part number, etc.
Copyright © 2021 Honeywell International Inc.