ML6161, ML7161, ML6174, and ML7174 35 and 70 lb-in non-spring return direct coupled actuators (DCA) are control actuators that provide floating or proportioning control for valves and dampers.
5 and 10 Nm Series non-spring return direct coupled damper actuators provide 2-position and floating control for air dampers, VAV units, air handlers, ventilation flaps, and louvers.
Kele Revolution™ KA-35 Series actuators are designed and tested to provide damper actuation up to 35 lb-in. They are non-spring return and with a proven track record of long and trouble-free operation.
Kele Revolution™ KA-44, KA-88, KA-175, and KA-301 Series direct acting actuators are designed and tested to provide reliable non-spring return control for dampers and valves.
M436 spring return actuators are used for 2-position back draft, outdoor air changeover, zone, or minimum position damper control.
M7415 spring return damper actuators provide two-position, three-position, floating, or modulating control of economizer systems, ventilation dampers, and combustion air dampers used in residential or commercial HVAC equipment.
M836 spring return actuators are used for residential and some light commercial applications in Series 80 circuits.
M8405 25 lb-in. spring return damper actuators provide 3-position control of economizer systems, ventilation dampers and combustion air dampers used in residential or commercial HVAC equipment.
M8415 25 lb-in. spring return damper actuators provide two-position, three-position, floating, or modulating control of economizer systems, ventilation dampers and combustion air dampers used in residential or commercial HVAC equipment.
MSXX10 and MSXX20 Series 3 Nm and 5 Nm spring return direct coupled actuators are used within heating, ventilating, and air conditioning (HVAC) systems.
N20/34 Series MN7220/7234 non-spring return damper actuators with 20 or 34 Nm (175 or 300 lb-in) of torque provide modulating or floating control for rotary valves, linear valves with appropriate linkage, and air damper applications.
S03, S05, S10, S20 Series spring return direct coupled actuators (DCA) are used within HVAC systems. They drive a variety of quarter-turn, final control elements requiring spring return fail-safe operation.
Series 41 and 81 Modutrol IV™ motors are 2-position (line and low-voltage control, respectively) spring return motors.
Series 61 and Series 62 Modutrol IV™ motors are 3-wire spring return and non-spring return floating control motors.
Series 71, 72, and 76 Modutrol IV™ motors are spring return and non-spring return motors used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller to position a damper or valve.
Series 90 Modutrol IV™ motors are spring return and non-spring return modulating proportional control motors. These motors are used with controllers that provide a Series 90 output to operate dampers or valves.
MBE electronic fail-safe and MBP fail-in-place actuators are designed for use with VR and VH Series butterfly valves.
Start your search with category name, product name, part number, etc.
Copyright © 2021 Honeywell International Inc.