32006523-001/U replacement temperature probe designed for use with the C7031D1062 temperature sensor.

TP974 are direct-acting, proportioning temperature sensors used with pneumatic controllers to control valve and damper actuators for one- or two-pipe installations.

LP914A and LP915A pneumatic sensors are proportional-type temperature sensors that are used with pneumatic controllers to manage pneumatic values and damper actuators. LP914A and LP915A pneumatic sensors can be duct-, well-, or wall-mounted sensors.

Excel T7515A-D M-CelTM space temperature sensors are platinum resistance temperature devices (RTDs) used with Excel MicroCellTM and MacroCelTM controllers to control variable air volume (VAV) terminal units and other equipment.

Temperature sensors for ZonePRO® thermostats are used in low voltage pressure-dependent applications.

Maximize comfort and maximize HVAC performance in any environment. Honeywell’s high-accuracy sensors measure humidity and temperature giving you the control you need within commercial buildings.

Series 2000 humidity and temperature transducers are highly accurate, stable humidity transducers designed for use with HVAC controllers such as the T7350 thermostat, H775 remote humidity controller, and W7760 direct digital controllers.

The R718A Wireless Sensor is capable to measure temperature at over a wide range.

The C7355 air quality sensors monitor temperature, Humidity, carbon dioxide, particulate matter and TVOC all in one wall or duct mountable module. The device communication over RS485 and easily integrates with the BMS.

C7600B solid state humidity sensors sense the relative humidity level of an area and are used with any controllers capable of processing 2 to 10V DC signals.

HP971A pneumatic humidity sensors are 1- or 2-pipe, direct acting humidity sensors that work with controllers to provide proportional control of pneumatic valve or damper actuators in systems requiring humidity control.

C7250 mixed/outdoor air temperature sensors include solid state temperature sensors and are unit mounted. They output a 20k NTC signal to the controller based upon temperature.

C7660 selectable temperature sensors are used with W7212 and W7459 economizers for referential dry bulb changeover.

C7400 analog enthalpy sensors are for use with W7212 and W7459 economizer controllers.

C7600 humidity sensors designed for economizers sense relative humidity in air and are used with controllers that can process a 4 to 20 mA signal.

The C7262 Sensor is a stand-alone carbon dioxide (CO2) and temperature sensor for use in determining ventilation necessity with HVAC controllers. The C7262 measures the CO2 concentration and temperature in the ventilated space.

CO2-RA715 is equipped with temperature and humidity sensor externally. It can monitor the ambient temperature and humidity, as well as detect the concentration of CO2 in the air.

The HCP00-EU condenstation prevention sensor is designed for use with electronic controllers in domestic or commercial heating and cooling systems.

The HSS-DPS dew point switch is used to monitor the formation of condensation on chilled ceilings or to prevent condensation at critical spots of HVAC systems.

PM25-RA716 is equipped with a PM2.5 dust sensor and temperature & humidity sensor, it can detect temperature and humidity as well as the concentration of suspended particles in the air per unit volume.