Aspirated Gas Detection for Micro Bore ASD System (VESDA-E VEA Addressable Aspirating Smoke Detection) and When used with the VESDA-E VEA.

VESDA Sensepoints XCL are Micro Bore ASD System gas detectors come complete with the main detector unit (pre- installed with sensor cartridge), two cable glands, calibration/flow cap, flexible tube and tube clips to connect to VEA tubing.

Demo unit with power connector plug installed and short length of pipe, elbow, end cap and two pipe labels.

Xtralis spare front cover is use with the VESDA-E VES & VESDA-E VEP Aspirating Smoke Detector. It consist of plastic with 3.5in Display size.

Spare Plastic Front cover for VES-A00-P smoke detector. It has LEDs in it for indication.

The Blanking Baffle is used with ICAM IAS aspirating smoke detector.

The 19 inch rack enclosures are designed to house up to 20 display and programmer modules in a wide variety of configurations to suit the particular requirements of a site where centralised control and monitoring of the VESDA system is required.

VP-CLIP 3/4-inch pipe support clamps are designed for use with VESDA® pipes. They are required for each five foot length of pipe.

The VSP-976 is a display front panel for VESDA-E VEA series of smoke detectors.

VESDA-E FRT COVER VEA-040-A00

Xtralis the manufacturer of the market leading VESDA Aspirating Smoke Detection (ASD) technology has developed with its sister company

The Tamper Proof Sampling Points (TPSP) provide an elegant addition to modern decor and can both minimize the risk of vandalism and tolerate abuse.

VESDA-E Sampling Module

VESDA Pipe and Fittings are part of an integrated system manufacturedfrom specialty plastics designed for use with most aspirating smoke detectionsystems, the VESDA VLP system in particular

VESDA-E Smoke Detection Chamber

VP pipe cutters are designed for use with VESDA® pipes.

LF42241 single-zone duct sampling kits are for use with XAS air sampling units. They include three tube-mounting plates, compression fittings, adaptors, elbows, inlet and exhaust tubes, flexible tubing, and reducers for use with XAS2-US.

VESDA® VPS100/300 and power supplies are capable of providing operating power, including battery backup, for the entire line of VESDA by Xtralis® aspirating smoke detectors.

The sensor covers are spares designed for VESDA Sensepoint XCL Micro Bore ASD System gas detectors.

VESDA-E VEA local relay StaX allow signaling of alarm locations from detectors via relays and provide mounting for fire panel loop input modules inside the enclosure.

Black polyethylene tubings by Xtralis has an inner dia of ½ inch and outer dia of 3/8 inch.

LF422 flexible single core tubing provides 1/2-inch inner diameter flexible tubes for use with XAS units in duct sampling.

Replacement Sensor for VESDA Sensepoint XCL Detectors.

VESDA ECO Gas Detection and Environmental Monitoring provides early warning of toxic, oxygen and flammable gas hazards to protect personnel and property whilst ensuring business continuity. Each ECO gas detector can house up to two gas sensors

VEA provides assured detection through active sampling and end to end system integrity monitoring.

Honeywell's Xtralis Tamper Proof Sampling Points are a part of Aspiring Smoke Detection. They can minimize the risk of vandalism and tolerate abuse.

VESDA-E VEA microbore tubes are custom made, high quality plenum rated flame retardant polyethylene tubes. They have superior stress crack resistance for reliable long-term performance

VESDA-E VEA RA joiners are right angle joiners for VESDA-E VEA microbore tubes. They come in packs of 10.

Pipe – 3⁄4”

VESDA® pipes and fittings make up a network of dependable specialty piping that constantly and efficiently carries air samples from protected zones to highly sensitive detectors.

Retardant Microbore Tubing is 1/4" UL Listed for use with VFT-15 detector. It is available in 500 & 1000 ft.

VESDA-E Filter Cartridge is field replaceable filter of VESDA-E detectors. It filters coarse particles

Xtralis ICAM Accessories offers Medium and fine filter elements for the internal filters inside the ICAM IFT, ICAM IAS and ICAM ILS series detectors. Replacement filters elements are available in pack of 10 with Black colour

Inline flow restrictor assembly used for refrigerated storage sampling kit. The Xtralis refrigerated storage sampling kit provides a standardised method of smoke sampling for Refrigerated Storage facilities.

VESDA-E VEA Microbore Tube Cutter are used for cutting microbore tubes.

The VESDA-E VEA series of detectors combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.

VESDA Sample Point Labels are designed to mark the location of sample points. Labels should be placed just above the sample point and positioned so that they are visible without obstruction.

VP-CEMENT solvent cement comes in one pint containers and is for use with VESDA® pipes and fittings.

VSP 850 in-line filters provide Xtralis® customers the ability to address a wide array of harsh environments with high levels of airborne contaminants in a simple and cost-effective manner.

The VESDA Modbus high level interface models links VESDAnet1 with PC software monitoring tools, building management systems (BMSs) or fire alarm control panels (FACPs). They are Type 2 models which have the echoing function is disabled.

VSP-960 is used as a mounting bracket for VESDA-E.

VESDA® VLF-250 smoke detectors are early-warning detectors designed to protect small, business-critical environments of less than 250 m2 (2,690 ft2).

The VESDA-E VEA Microbore tubes are custom made, high quality plenum rated flame retardant polyethylene tubes that are reliable long-term performance. They are lightweight and flexible for easy handling and installation.

The VESDA-E VEA series of detectors are used for early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.

ICAM by Xtralis provides various sampling points for the different applications. The classic sampling points are typically used for cabinet protection.

Standard sampling points are designed for a ceiling with a void where micro bore tubes are run in the void and sampling points are mounted in the ceiling.

VESDA-E VEA sampling point and microbore tube is fully supervised by the detector. VEA sampling points are available in two different type standard and surface mount. It can be used in Healthcare, Offices and Electrical cabinets.

VSP-877 flush-mount sampling points provide a functionally and aesthetically improved alternative to the conical sampling points used in Xtralis® aspirating smoke detection (ASD) pipe networks.

VESDA® VLF-500 smoke detectors are early-warning detectors designed to protect small, business-critical environments of less than 500 m² (5,380 ft²).

Spare Exhaust Adaptor for the VEU series of aspirating smoke detectors.

VSP-878 adapter kits are designed to allow the VSP-877 flush-mount sampling points to be used with larger 1/2-inch capillary tubing.

VSP benchmark test points placed along the pipes run from the ASD and provide a means to validate the integrity of the system and pipe network.

Vesda Test Transformers are previously known as the Hot Wire Test Power Supply Unit. They are used to test very early warning aspirated smoke detection equipment.

VESDA Power Supply is capable of providing operating power, including battery backup, for the entire line of VESDA by Xtralis Aspirating Smoke Detectors.

Accessories for Vesda

The VESDA 19inch Sub rack Enclosure is designed to house up to 12 display and/or programmer modules, VESDAnet sockets, or relay only modules in a wide variety of confi gurations to suit the particular requirements of a site.

The VESDA-E VEA Power Supplies are designed to power the VESDA-E VEA Detector and VESDA-E VEA Relay StaX including battery backup. It provides 24 volt operating power to the VEA unit as well as battery charging function.

VSP-972 filters are spare filters for use with VEA aspirating smoke detectors.

XCL-XRL-SC-H2 is a VESDA Sensepoint XCL/XRL replacement gas sensor for hydrogen gas.

Flush Sample Point Head only for 10 mm OD tube.

VESDA® LCD Programmers are menu-driven, allowing the user to conveniently configure, commission, and maintain a VESDA aspirating smoke detection system, as well as program each individual detector.

VPS-300US Power Supply provides power for: up to 3 VESDA VLP or Laser SCANNER detectors, or up to 15 remote (single box) units, or up to 3 sub rack assemblies.

VBC-001 is a battery cabinet that takes up to 4 batteries of 12 Vdc, 12 Amp/h

VESDA-E Series aspirator

VESDA VLI Smoke Detectors by Xtralis is first early warning aspirating smoke detection (ASD) system, designed to protect industrial applications and harsh environments, combining a fail-safe Intelligent Filter with an advanced clean-air barrier .

The VLI detector combines a fail-safe Intelligent Filter (patent pending) with an advanced clean-air barrier for optics protection allowing the use of absolute detection and a long detection chamber life without the need for recalibration.

VESDA® VHX-0200 Sliding Windows high level interface (HLI) models enable connections between a VESDAnet™ (a communications protocol that allows devices to communicate on one network) and configuration/monitoring platforms.

VESDA® Modbus type 3 HLIs act as a proxy for all VESDA devices on the VESDAnet™ network, providing access to rich status information available from VESDA detectors, as well as the ability to control and configure these devices.

VESDA Sensepoint XCL Micro Bore provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats.

ASD TXT-SPEECH ENG-JILL US

ASD SITE LIC PRIMARY KIT VSM4

The VSM4 software product are valuable revenue generator for Xtralis distributors.