Single Mode Fibre Card by Honeywell allows a fast and more reliable network over distances of up to 20km between Vigilon Plus Panels.

The Gent S-Cubed offers a comprehensive range of loop powered alarm sounders with integrated voice and visual alarms. The sounders shall be capable of providing 3 different sound signals, which are selected/configured via the main control panel.

The S4-34891 is a pack of replacement glass elements designed for the S4-34800.

The VS-SPARE-24 are Replacement Spares Pack for Vigilon Control Panels - VIGPLUS-24 & VIGPLUS-72.

Gent VIGPLUS-24 1 To 4 Loop Control Panel With 1 Loop Card, By Honeywell. The Control Panel Continuously Monitor Devices That Are Connected To Each Device Loop.

Is Flashdome Atex Approved Visual Indicating Device  (No En54-23 Approval) Monitored

Input Output cards by Gent are designed for installation in EN54 Vigilon analogue addressable fire panels and Network node.

The Vigilon LCD Repeat Indicator Repeats displays Fire, Fault and Disablement information on a 2 x 40 character LCD.

MCC Control Card for VIG1-24 & VIG1-72 (EN54)

Main Control Cards are part of Vigilon system. It is available with EN and BS version plus 16 and 8 line display.

The Manual Call Points by GENT, Honeywell are for the Vigilon and Nano system that are easy to install and enables personnel to raise an alarm in the event of a fire incident.

Every Manual Call Points With Resettable Elements are continuously monitored ensuring that the triggers are responded to in less than one second system wide.

Nano is a single loop analogue addressable panel with an intuitive user interface and attractive appearance delivering an experience that makes the fire alarm system easy to use and safe to operate.

PCB Assembly Vigilon Printer

Powersonic Battery 26AH -12V - Non Flame Retardant (Used in Legacy Gent Voice Systems)

Powersonic Battery 38AH -12V - Non Flame Retardant (Used in Legacy Gent Voice Systems)

Powersonic Battery 65AH -12V - Non Flame Retardant (Used in Legacy Gent Voice Systems)

Red Body Sounder offers a comprehensive range of loop powered alarm sounders with integrated voice and EN54-23 certified visual alarms.

Replacement Ribbon Cables for VIG1-24 and VIG1-72 Panel

Ribbon Cables for Vigilon Repeats

The S-cubed range of alarm sounders incorporate sound, speech and strobe effects all in one range of alarm devices. The range offers all variants in the choice of 2 colors red or white.

S-Cubed System Sounder is a comprehensive range of loop powered alarm sounders with integrated voice.

S-Cubed offers a comprehensive range of loop powered alarm sounders with integrated voice and EN54-23 certified visual alarms.

S-Quad accessories is designed exclusively for S-Quad Multi-Sensor and Visual Alarms Device.

S-Quad Duct Mounting Brackets are designed for the S-Quad Duct Smoke Sensor. They are available to mount the detector on circular and insulated ducts.

S-Quad Mounting Plate is an installation base used for installing S-Quad Multi-Sensor.

S-Cubed incorporates sound, speech and an EN54-23 visual alarm all in one device. Offers a comprehensive range of loop powered alarm sounders with integrated voice and VADs.

S-Cubed incorporates sound speech and an EN54-23 visual alarm all in one device.

S4 Input Interface modules are used to link the fire alarm system to other plant management devices such as sprinklers and security systems. They can also be used to link to a zone of conventional detectors.

Gent S4-34499 are set of 2 spare keys for the Key-Switch Interface and Key-Switch Call Point.

S4-34807 Keyswitch MCP

The S4-700 Base is designed to accept the range of combined detection and alarm devices.

Semi-flush fixing kit is designed to mount an S-Quad device. To semi-flush mount a special housing must be used which consists of a main assembly and a trim ring.

Spare Ribbon Cable set for Compact Panel

VS-PROLL is a replacement printer paper roll for the Gent Vigilon range of fire alarm control panels. This part is also compatible with the Gent 3300 and Gent 3400 range of fire alarm control panels.

Gent Nano Spares Pack

The low power addressable Voice Enhanced Sounder and combined Strobe products provide audible and visual alarm signals, and are designed for use in Gent analogue and addressable fire alarm systems.

VIG-NC-FO Network Card features up to 31 Control panels and Network Nodes can be connected in a secure loop

The replacement Master Repeat Cards are designed for installations into new Repeat panel or A3 Mimic panel that are wired on to a loop of an analogue and addressable fire detection and alarm systems.

Gent by Honeywell introduces Vigilion's Loop Powered Interfaces and other devices which can accommodate a high quantity of loop powered interface units offering flexible range of inputs and outputs from the FD&A system.

The Vigilion Main Control Cards are a range of cards that are designed for installation in Vigilion panels.

Vigilon & Nano Manual Call Points by Gent are a range that serves as an emergency fire alarm with options such as glass, resetable elements and lift up covers.

The Vigilon A3 Mimic provides a pictorial representation of a building’s layout.

Vigilon BACnet Gateway (VIG-BNG-RW) provides an interface between a computer network and GENT EN54 Vigilon fire detection and alarm system

The Vigilon BACnet Gateway provides an interface between a computer network and GENT EN54 Vigilon fire detection and alarm system, using BACnet communication protocol.

Vigilon Plus Control Panels are accommodating up to 200 devices including advanced fire sensors, interfaces, call points, alarm sounders and visual alarms. The Compact Plus 2 loop panels are available with integrated 24 hour standby capacity.

The Vigilon Fibre Optic Secure Domain Cards allow fast message passing to the network. These cards must be plugged into the backplane of the panel or node in a dedicated slot.

Input/Output Card by Gent is a part of Vigilon System.

Vigilon Loop Card is designed to provide a powerful diagnostic tool and support a higher loop load in alarm by delivering a higher capacity for EN54-23 compliant visual alarms devices.

The Vigilon Netwrok Cards are network cards for Vigilon Addressable Fire Detection System that expands the Gent Vigilon Plus and Gent Vigilon fire alarm network

Vigilon Plus Control Panel accomodates and controls up to 200 devices including advanced fire sensors, interfaces, call points, alarm sounders and visual alarms. They are 1 to 4 loop control panel with or without a printer.

Vigilon Plus Repeat control panel provides full display and control of the system.

Voice Sounder VAD is available in white and red colour having -10°C to +50°C operating temperature. Four voice phrases and a bell tone available as standard

The Xenex Conventional Fire Detection and Alarm system from Gent provides owners of small building premises with quality protection equipment at an economical price.

Spares pack for Xenex Panels