Zone & Unitary Controllers
Cleanroom Monitor
The CR3B Series Cleanroom Monitor was developed specifically to allow for monitoring of confined spaces with accuracy and reliability. It features a flush fitting stainless-steel front plate that enables the user to wipe down the unit when necessary.
The CR3B Series Cleanroom Monitor was developed specifically to allow for monitoring of confined spaces with accuracy and reliability. The CR3B allows for either in-room or remote monitoring with three different models; integrated sensors, remote sensors or display only to suit a variety of installation needs. It features a flush fitting stainless-steel front plate that enables the user to wipe down the unit when necessary.
Cleanroom Monitor provide Modbus network protocol for industrial manufacturing environments. The detector communicates on a standard Modbus network using either of two transmission modes: RTU (Remote Terminal Unit) or ASCII (American Standard Code for Information Interchange). The hardware interface is RS-485. Select the desired mode along with the other parameters using the Configuration Menu.
Features & Benefits:- Accuracy and Reliability
- Flush fitting stainless-steel front plate
- Modbus communication
- CE
- RoHS
Others
- Minimum Output Signal
- Current:4; Voltage:0 mA; VDC
- Maximum Pressure Measurement
- ±250 or ±25 Pa or mmWC
- Overall Height
- 182.5 mm
- Minimum Pressure Measurement
- 74.7/7470 Kpa/mmWC
- Maximum Operating Temperature
- 50/122 C/F
- Overall Width
- 255 mm
- Maximum Output Signal
- Current: 20; Voltage: 5 / 10 mA; VDC
- Maximum Operating Pressure
- ±250 or ±25 Pa or mmWC
- Power Requirements
- 24-30 / 20-26 VDC/VAC
- Minimum Operating Temperature
- 0/32 C/F
- Overall Depth
- 36 mm
- Supply Voltage
- 24-30 / 20-26 VDC/VAC
- Communications Protocol
- Modbus
- Thermal Effects
- <±1; 0 to 70/ 32 to 158 %FS; C/F
- Mounting Type
- Wall mount inch
- Electrical Connection
- Pluggable screw terminal block (14 to 22 AWG)
- Switch Type
- NO optically isolated solid state FET switch
- Brand
- Greystone Energy Systems
- Includes
- S/S Clean Room Sensor - Temperature; Humidity & Low Pressure voltage alternating current
- For Use With
- S/S Clean Room Sensor - Temperature; Humidity & Low Pressure volt
Others
- Minimum Output Signal
- Current:4; Voltage:0 mA; VDC
- Maximum Pressure Measurement
- ±250 or ±25 Pa or mmWC
- Overall Height
- 182.5 mm
- Minimum Pressure Measurement
- 74.7/7470 Kpa/mmWC
- Maximum Operating Temperature
- 50/122 C/F
- Overall Width
- 255 mm
- Maximum Output Signal
- Current: 20; Voltage: 5 / 10 mA; VDC
- Maximum Operating Pressure
- ±250 or ±25 Pa or mmWC
- Power Requirements
- 24-30 / 20-26 VDC/VAC
- Minimum Operating Temperature
- 0/32 C/F
- Overall Depth
- 36 mm
- Supply Voltage
- 24-30 / 20-26 VDC/VAC
- Communications Protocol
- Modbus
- Thermal Effects
- <±1; 0 to 70/ 32 to 158 %FS; C/F
- Mounting Type
- Wall mount inch
- Electrical Connection
- Pluggable screw terminal block (14 to 22 AWG)
- Switch Type
- NO optically isolated solid state FET switch
- Brand
- Greystone Energy Systems
- Includes
- S/S Clean Room Sensor - Temperature; Humidity & Low Pressure voltage alternating current
- For Use With
- S/S Clean Room Sensor - Temperature; Humidity & Low Pressure volt
- Minimum Output Signal : Current:4; Voltage:0 mA; VDC
- Maximum Pressure Measurement : ±250 or ±25 Pa or mmWC
- Overall Height : 182.5 mm
- Minimum Pressure Measurement : 74.7/7470 Kpa/mmWC
- Maximum Operating Temperature : 50/122 C/F
- Overall Width : 255 mm
- Maximum Output Signal : Current: 20; Voltage: 5 / 10 mA; VDC
- Maximum Operating Pressure : ±250 or ±25 Pa or mmWC
- Power Requirements : 24-30 / 20-26 VDC/VAC
- Minimum Operating Temperature : 0/32 C/F
- Overall Depth : 36 mm
- Supply Voltage : 24-30 / 20-26 VDC/VAC
- Communications Protocol : Modbus
- Thermal Effects : <±1; 0 to 70/ 32 to 158 %FS; C/F
- Mounting Type : Wall mount inch
- Electrical Connection : Pluggable screw terminal block (14 to 22 AWG)
- Switch Type : NO optically isolated solid state FET switch
- Brand : Greystone Energy Systems
- Includes : S/S Clean Room Sensor - Temperature; Humidity & Low Pressure voltage alternating current
- For Use With : S/S Clean Room Sensor - Temperature; Humidity & Low Pressure volt
