Mains Switching interface units offers heavy duty relay switching for both 24V and 230V applications with contacts rated at 13A suitable for switching damper control units and other building controls requiring high contact rating for mains shutdown.
Field Bus Interface Plus is used for interfacing for the programming of the FACP 8007, 8000 C/M, 8008, gateway, ABIGA and Extinguishing Control Panels 8010 or for the direct field-side connection of a single installed loop.
These S4 Single Output Interfaces are designed for use with any Vigilon/34000 fire alarm control panel. Each module includes loop isolators for device isolation.
The S4 Single Output Interfaces are suitable for mains switching, they provide normally closed and normally open contacts rated at 13A 250Vac (nominal 230Vac) resistive load.
The IST200 Translator Module are intended to be used with analogue addressable systems in conjunction with System Sensor 22051EISE and 2251EIS intrinsically safe smoke sensors.
Low Voltage Input /Output Vigilon Interface Module used to control a resistive load of up to 1A at 30Vdc/ac via a set of single pole change over contacts. Also allow the monitoring of the external equipment.
The PW Series are RS232/M-Bus converters which act as master interfaces for M-Bus networks with 3/20/60 slaves
MODBUS Interface Modules connects to the RS-485 peripheral bus of the ZX series fire alarm control panels and allows panel interrogation by Modbus control system.
The Mains powered interface units are EN54-4 compliant battery backed power supplies that can be directly connected to the Vigilon and Nano loop and also have highly flexible interfacing capability.
Notifier Pearl Smart Watch Kit. Provides an IP interface from your panel to your AMX graphics package.
RS485 Communication Module supports two-wire RS485 multidrop transmission between networked ZX2Se/ZXSe/ZX5Se control panels
S4 Input Interface modules are used to link the fire alarm system to other plant management devices such as sprinklers and security systems. They can also be used to link to a zone of conventional detectors.
S4 Interface Modules 4-Input / Output Interface Module are designed for use with Vigilon and 34000 fire alarm control panel
The Universal Interface Module (UIM) serves as an interface module for the Voice Alarm and Public Address system. It connects two analogue audio inputs, two analogue audio outputs as well as 48 control contacts.
VESDA Wall-Mounted Modbus High Level Interface (HLI) links your VESDAnet1 with PC software monitoring tools, Building Management Systems (BMSs) or Fire Alarm Control Panels (FACPs).
VESDA® Modbus type 3 HLIs act as a proxy for all VESDA devices on the VESDAnet™ network, providing access to rich status information available from VESDA detectors, as well as the ability to control and configure these devices.
VESDA® VHX-0200 Sliding Windows high level interface (HLI) models enable connections between a VESDAnet™ (a communications protocol that allows devices to communicate on one network) and configuration/monitoring platforms.
Gent by Honeywell introduces Vigilion's Loop Powered Interfaces and other devices which can accommodate a high quantity of loop powered interface units offering flexible range of inputs and outputs from the FD&A system.
ZX range spare parts base PCBs consists of 5 loops and are used for ZXSe intelligent multi-protocol fire alarm control panel.
The ZX series is an intelligent fire alarm control panel. The ZX series simple approach has produced a modular scalable fire alarm platform suitable for protecting all types of premises.
Start your search with category name, product name, part number, etc.
Copyright © 2022 Honeywell International Inc.