Des algorithmes logiciels sophistiqués et deux microprocesseurs apportent au modèle FS24X les plus hautes performances de détection d'incendie, ainsi qu'un rejet optimal des fausses alarmes. • Résumé des caractéristiques

Les bases du détecteur d'isolateur enfichable B224BI empêchent toute boucle de communication d'être désactivée en cas de court-circuit.

Les bases de relais de détecteur B224RB sont pour être utilisées avec détecteurs série 200 et fournissent un relais de contact unique de forme C pour le contrôle des fonctions auxiliaires, telles que les fermetures de portes et le rappel d'ascenseur.

Les filtres en ligne VSP 850 offrent aux clients de Xtralis® la possibilité de traiter un large éventail d’environnements difficiles avec des niveaux élevés de contaminants atmosphériques de manière simple et rentable.

The FT series Replacement Filter Elements are a range of medium and fine filter elements for the internal filters inside the ICAM IFT, ICAM IAS and ICAM ILS series detectors.

VESDA FILTER FOAM ELEMENT, E700-FMK4

Les objectifs couleur de la série L sont disponibles en quatre couleurs : ambre, bleu, vert et rouge. Les objectifs sont compatibles avec les stroboscopes de la série L, y compris la fixation murale ou au plafond.

VESDA-E FRT COVER VEA-040-A00

The VESDA-E VEA series of detectors combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.

The VSP-976 is a display front panel for VESDA-E VEA series of smoke detectors.

Les filtres VSP-972 sont des filtres de rechange à utiliser avec les détecteurs de fumée par aspiration VEA.

Le VSP-960 est utilisé comme support de montage pour le VESDA-E.

FM Series electromagnetic door holders are designed for virtually any remote door release application. They are primarily used to hold fire and smoke barrier doors open until released by a remote smoke detector or other switching device.

VESDA-E VEA-40 Mounting Bracket is an accessory for VESDA-E VEA Local Relay StaX.

System Sensor Select Series detector color kits offer expanded color options to meet varying aesthetic applications.

Le kit de montage 6500-MMK permet aux détecteurs linéaires de fumée d’être montés au plafond ou au mur lorsque l'angle de celui-ci avec le réflecteur ou avec l'emetteur est supèrieur à 10°.

Le couvercle avant de rechange Xtralis est utilisé avec le détecteur de fumée par aspiration VESDA-E VEP. Il est constitué de plastique avec une taille d’affichage de 3,5 pouces.

Diaphragme réduction de débit pour kit de prélèvement VSP-860

Inline flow restrictor assembly used for refrigerated storage sampling kit. The Xtralis refrigerated storage sampling kit provides a standardised method of smoke sampling for Refrigerated Storage facilities.

Couvercle avant en plastique de rechange pour détecteur de fumée VEP-A00-P. Il comporte des DEL pour l’indication.

Xtralis Smoke detector is an interface card for the range of Xtralis VESDA VLF smoke detectors. Multi-function Control Card expands the range of input and output communications a VLF detector can perform.

VESDA VIC Multi-function Control Cards are interface cards for the range of Xtralis VESDA VIC smoke detectors. They expands the range of input and output communications.

Les points d’échantillonnage à montage encastré VSP-877 offrent une alternative fonctionnellement et esthétiquement améliorée aux points d’échantillonnage coniques utilisés ds les réseaux de tubes de détection de fumée par aspiration (ASD) Xtralis®.

Detector test magnets simplify detector testing and maintenance

DCOIL remote test coils are required for older DNR(W) duct detector housings.

VESDA-E VEA microbore tubes are custom made, high quality plenum rated flame retardant polyethylene tubes. They have superior stress crack resistance for reliable long-term performance

Pt é VESDA-E VEA et t m. ent. sp. Les points d'échantillonnage VEA sont disponibles en deux types différents de montage standard et de montage en surface. Il peut être utilisé dans les établissements de santé, les bureaux et les armoires électriques.

VESDA-E Sampling Module

Les points d'échantillonnage standard sont conçus pour un plafond avec un vide où des tubes à micro-alésage sont utilisés dans le vide et où les points d'échantillonnage sont montés au plafond.

The VESDA-E VEA Microbore tubes are custom made, high quality plenum rated flame retardant polyethylene tubes that are reliable long-term performance. They are lightweight and flexible for easy handling and installation.

Les avertisseurs sonores de la série L sont conçus pour simplifier les installations afin de fournir une signalisation primaire et secondaire pour les applications de sécurité et d’incendie.

IP internet and GSM dual path communicators offer contact ID reporting that operate in conjunction with any fire alarm control panel (FACP) that has a built-in dialer.

End-of-line (EOL) resistors are sold in packs of 10 and are available in 4.7 or 47K Ohm.

Fire detector protective cover helps prevent malicious or accidental false fire alarms. This unique device has helped prevent false fire alarms around the world for decades.

Le coupe-tubes micro-perforé VESDA-E VEA est utilisé pour couper les tubes micro-perforés.

Remote Mount Configuration is used for VESDA Display Unit

Boîtier de protection IP 66 pour récepteur OSID.Protection contre la poussière, l'humidité et la pénétration d'eau.Équipé d'une vitre limitant l'atténuation du signal UV et IR.

Boîtier de protection IP 66 pour emetteur OSID.Protection contre la poussière, l'humidité et la pénétration d'eau.Équipé d'une vitre limitant l'atténuation du signal UV et IR.

Modules d’extension/alimentation du circuit d’appareil de notification (NAC) pour étendre l'alimentation et la synchronisation NAC existants, tout en alimentant les dispositifs auxiliaires.

Use an End-of-Line device with control panel releasing circuits.

Étiquette à bande de repérage d'orifice (lot de 200)

Noise Control Modules are used to reduce the common noise for example, noise that is present on both conductors on the Signaling Line Circuit (SLC).

ISP-406 is used as a cover removal tool for IAS or ILS

Sub Rack Spare Modules are used in 19inch VESDA Sub Racks. Spare modules includes standard display, scanner display & VLC VN display with relays and remote termination card.

EQDR door assemblies are for use with NOTIFIER® EQ Series cabinets. These vented doors are available in red or black, and feature two, three, or four tiers.

The 19 inch rack enclosures are designed to house up to 20 display and programmer modules in a wide variety of configurations to suit the particular requirements of a site where centralised control and monitoring of the VESDA system is required.

The Blanking Baffle is used with ICAM IAS aspirating smoke detector.

The System Sensor DH400OE-1 is a steel enclosure for mounting a standard indoor rated duct smoke detector outdoors.

Le filtre en mousse secondaire VLI est une pièce de rechange du filtre secondaire interne pour VESDA VLI.

B112LP detector bases are designed for use with System Sensor® models 2151 photoelectronic and 1151 ionization detector heads. These 4-wire bases are equipped with screw terminals for power, ground, and an optional remote annunciator.

Les filtres de test en acrylique OSP-003 sont destinés à être utilisés avec les détecteurs OSID.

The Trim Rings are for use with 2351B intelligent detectors and are compatible with B300-6, B300-6-IV, and B210LP 6-inch standard bases.

FM Series electromagnetic door holders are designed for virtually any remote door release application. They are primarily used to hold fire and smoke barrier doors open until released by a remote smoke detector or other switching device.

Les carillons de sortie sélectionnables de la série L sont des dispositifs de notification en mode privé utilisés pour alerter le personnel formé afin d’enquêter sur des situations d’urgence possibles.

SSM Series alarm bells are low-current, high-decibel notification appliances for use in fire and burglary systems or other signaling applications.

Spare Exhaust Adaptor for the VEU series of aspirating smoke detectors.

The VESDA Sub Rack can be configured in thousands of different way to configure. Then modules will be assembled in the configuration you specify, from left to right. Position 1 is the far left position, while Position 4 is the far right.

Kit de chauffage pour réflecteur (en cas de risque de condensation).

Les avertisseurs sonores stroboscopiques à 4 fils de la série L sont destinés à la notification complète du bâtiment ainsi que sur le terrain de l’établissement.

Emetteur OSID - OSE avec pile ou alimentation externe 24 Vcc. Chaque émetteur fournit une séquence lumineuse spécifique combinant 2 longueurs d'onde UV et IR. Chaque émetteur peut ainsi être identifié de façon individuelle par le récepteur.

SB-10 surface backboxes are for use with Fire-Lite® BG-12LR agent release stations.

Black and White detector kits for 200 Series detectors.

Surface backboxes are for use with Fire-Lite® BG-12LR agent release stations.

Le socle de fixation est nécessaire pour répondre aux exigences locales en matière de code et d'application et pour cela, System Sensor offre des socles standard de 4 po et 6 po.

Replacement Sensor for VESDA Sensepoint XCL Detectors.

Le VEP est un des détecteurs les plus performant du marché il fait partie de la gamme VESDA-E.Le VEP-A10-P-NF dispose d'un écran tactile couleur 3,5" permettant la visualisation instantanées des états du détecteur

VESDA® VPS100/300 and power supplies are capable of providing operating power, including battery backup, for the entire line of VESDA by Xtralis® aspirating smoke detectors.

Le VSP-963 est un filtre de rechange pour la série VESDA-E VEP.

L-Series SPCW8 dual-voltage speakers provides a solution for ceiling mount applications that are used for tap settings that range between 1/8 to 8W. These speakers provide a solution for almost any voice or audio requirement.

VESDA® VLI early warning aspirating smoke detection systems are designed to protect industrial applications and harsh environments up to 21,520 ft2.

Exhaust Deflector is a spare part of VESDA VLS detector.

XCL-XRL-SC-H2 is a VESDA Sensepoint XCL/XRL replacement gas sensor for hydrogen gas.

VESDA® LCD Programmers are menu-driven, allowing the user to conveniently configure, commission, and maintain a VESDA aspirating smoke detection system, as well as program each individual detector.

Power-Limited Supply/Charger convert 115V AC/60 Hz input into a power-limited 12V DC or 24V DC output at 2.5A.

The VESDA Modbus high level interface models links VESDAnet1 with PC software monitoring tools, building management systems (BMSs) or fire alarm control panels (FACPs). They are Type 2 models which have the echoing function is disabled.

The STI is an accessories that are been used with STI Stopper II®. The accessories that are been used are conduit gasket and conduit spacer.

ZNAC-4 notification appliance circuit (NAC) option modules are Class A conversion modules which mount to J3 connectors on the upper right side of the FCPS-24 (field charger/power supply) circuit board.

Les bases de diffuseur sonore B200SR et LF sont compatibles avec les installations existantes de la série B501BH. Les utilisateurs peuvent choisir l'une des deux tonalités B501 prises en charge (ANSI Temporal 3 ou Continu) via un cavalier.

VESDA Sample Point Labels are designed to mark the location of sample points. Labels should be placed just above the sample point and positioned so that they are visible without obstruction.

Les éléments de filtre en ligne par Xstralis offrent aux clients de Xtralis la possibilité de traiter un large éventail d’environnements difficiles avec des niveaux élevés de contaminants atmosphériques de manière simple et rentable.

Les kits de cadre de la série L permettent aux installateurs de transformer facilement n’importe quel dispositif d’incendie ou simple de la série L en un dispositif qui répond aux exigences ECN/MNS.

B110LP detector bases are designed for use with System Sensor® models 2151 photoelectronic and 1151 ionization detector heads. These 2-wire bases are equipped with screw terminals for power, ground, and an optional remote annunciator.

XAS smoke detectors provide a flexible detection solution to meet the unique needs of challenging applications found in typical commercial and industrial sites.

Xtralis VESDAnet Socket is a VSR spare module for VESDA sub rack.

ISO-6 six fault isolator modules provide six equivalent circuits that will allow a portion of the communications loop to continue operating when a short circuit occurs on that loop.

Les détecteurs de fumée par conduit InnovairFlex™ raccordent une impressionnante collection d'innovations conçues pour vous faire gagner du temps et de l'argent et vous offrir la flexibilité dont vous avez besoin sur le terrain.

VEA provides assured detection through active sampling and end to end system integrity monitoring.

Les points d’échantillonnage Xtralis inviolables de Honeywell minimisent le risque de vandalisme.

Les points d’échantillonnage Xtralis inviolables de Honeywell minimisent le risque de vandalisme.

Les raccords VESDA-E VEA RA sont des raccords à angle droit pour les tubes micro-perforés VESDA-E VEA. Ils sont livrés par lot de 10.

InnovairFlex™ 2-wire photoelectric duct smoke detectors sense airflow at speeds ranging from 100 to 4,000 ft/min.

InnovairFlex™ 4-wire photoelectric duct smoke detectors offer 2 sensors to 1 powerboard capability in standard (D4120) and watertight (D4120W) versions.

Les outils de test et de mise en service sont conçus pour les tests au fil chaud des détecteurs de fumée par aspiration.

Les avertisseurs sonores compacts de la série L sont conçus pour simplifier les installations afin de fournir une signalisation primaire et secondaire pour les applications de sécurité et d’incendie.

SpectrAlert® Advance strobes include a variety of features that increase application flexibility and simplify installation, such as field-selectable settings, including candela, and automatic selection of 12 or 24V operation.

Multi-voltage conventional relays are used for high-current switching applications such as fans and damper assembly controls, door controls, air handling unit controls, and other types of system interfacing.

Les diffuseurs sonores basse fréquence de la série L comprennent une variété de fonctionnalités qui augmentent la polyvalence de leur application tout en simplifiant l’installation.

VESDA-E Smoke Detection Chamber

Le détect. VLI combine un filtre intell. à sécurité intég. (brevet en attente) avec une barr. d’air propre avan. pr la protec de l’optique, permet. d’utiliser une détec. absolue et de prolonger la durée de vie de la chambre de détec. ss réétalonnage.

La gamme détecteurs VESDA-E VEA combine la fiabilité VESDA et la détection précoce de la fumée à l'adressabilité ponctuelle. Elle offre également tout un éventail d'options d'annonce, largement supérieures à celles de détecteurs ponctuels ordinaires.

The Pyrotector Model 30-2021-24 and Model 30-2021E-24Ultraviolet (UV) Flame Detectors are highly sensitive to the ultraviolet radiation given off by all types of flames, including those produced by flammable liquids and gases.

Multi-voltage conventional relays are used for high-current switching applications such as fan and damper assembly control, door control, air handling unit controls, and other types of system interfacing.

SpectrAlert® Advance strobes include a variety of features that increase application flexibility and simplify installation, such as field-selectable settings, including candela, and automatic selection of 12 or 24V operation.

Les diffuseurs sonores basse fréquence de la série L comprennent une variété de fonctionnalités qui augmentent la polyvalence de leur application tout en simplifiant l’installation.

L-Series 2-wire horn strobes include a variety of features that increase their application versatility while simplifying installation.

Les avertisseurs sonores stroboscopiques SpectrAlert® Advance sont dotés d'une variété d’équipements qui augmentent la flexibilité de l'application et simplifient l'installation.

Backboxes are for use with fire alarm control panels (FACPs) and are used to mount up to two batteries and power supplies.

The Alerton ESD-100 is an Ethernet data line protector, which protects equipment connected to unshielded twisted pair (UTP) Ethernet networks from transient voltage.

The VESDA-E VEA Power Supplies are designed to power the VESDA-E VEA Detector and VESDA-E VEA Relay StaX including battery backup. It provides 24 volt operating power to the VEA unit as well as battery charging function.

Les fixations d’objectifs couleur SpectrAlert® Advance sont faciles à installer sur tous les appareils stroboscopiques SpectrAlert® Advance intérieurs ou extérieurs pour fournir une signalisation visuelle distinctive.

Dispositif de test et de signalisation. Il permet d'effectuer le test d'alarme sur les détecteurs OSID et OSI-RE. Le boîtier RTS151KEYF permet le réarmement local d'un détecteur OSI-RE et OSID.

VP-CLIP 3/4-inch pipe support clamps are designed for use with VESDA® pipes. They are required for each five foot length of pipe.

VPS-300US Power Supply provides power for: up to 3 VESDA VLP or Laser SCANNER detectors, or up to 15 remote (single box) units, or up to 3 sub rack assemblies.

Remote annunciators are designed for both conventional and intelligent applications. Their red LED provides visual indication of an alarm condition.

Xtralis Accessories offers IAS/ILS Corner Studs. Corner Studs are used as spare part and available in pack of 4.

Les avertisseurs sonores stroboscopiques SpectrAlert® Advance sont dotés d'une variété d’équipements qui augmentent la flexibilité de l'application et simplifient l'installation.

L-Series speaker strobes reduce costly ground faults using a plug-in design and universal mounting plate that allow the installer to pre-wire mounting plates, dress wires, and confirm wiring continuity before plugging in the speakers.

SYNC-1 accessory cards are designed to operate with System Sensor® six supervised control modules. Sync-Circuit Modules synchronize SpectrAlert Advance strobes, horns, and chimes over a single pair of wires.

La cartouche filtrante VESDA-E est un filtre destinée à la maintenance sur site pour les détecteurs VESDA-E.

Les filtres VSP-030 sont destinés à être utilisés avec les détecteurs intelligents VESDA® VLI.

Non Scanner Relay Processor Module (DRP) is required if remote relays are not used with display.

Scanner Relay Processor Module (DRP) is required if remote relays are not used with display.

Les kits d’installation pour détecteurs OSID comprennent un outil d’alignement laser, un filtre de test, un câble PC, un chiffon de nettoyage et un manuel.

Les avertisseurs sonores stroboscopiques SpectrAlert® Advance à 4 fils sont dotés d'une variété d’équipements qui augmentent la flexibilité de l'application et simplifient l'installation.

WFDTN t-tap water flow detectors consist of a rugged, NEMA 4 rated enclosure that is more damage resistant than previous metal designs.

The trim rings are designed for semi-flush mounting applications, and intended for use with BG-12 Series fire alarm pull stations.

2D51 duct smoke detectors are low-profile photoelectric detectors designed for special applications, specifically for use in no-flow or low-flow air-handling systems (0 to 4,000 FPM).

The SENS-RDR utilizes infrared technology to read the sensitivity of i3 and 100 Series conventional detectors.

Les transformateurs de test Vesda étaient auparavant connus sous le nom de bloc d’alimentation du test de fil chaud. Ils sont utilisés pour tester l’équipement de détection de fumée aspirée à avertissement très précoce.

The System Sensor M500X Fault Isolator modules enable part of the communications signaling line circuit to continue operating when a short circuit occurs. The Module is an automatic switch that opens when the line voltage drops below four volts.

The VESDA-E VEA series of detectors are used for early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.

ICAM by Xtralis provides various sampling points for the different applications. The classic sampling points are typically used for cabinet protection.

La famille de tubes d'échantillonnage DST est constituée de pièces de tuyauterie en acier avec une série de trous percés sur toute la longueur du tube et devrait s’étendre sur toute la largeur du conduit.

Les carillons stroboscopiques de la série L sont des dispositifs de notification en mode privé utilisés pour alerter le personnel formé afin d’enquêter sur les situations d’urgence possibles et de prendre les mesures appropriées.

Les HLI VESDA® Modbus type 3 agissent comme proxy pour ts les dispo. VESDA sur le réseau VESDAnet, en fourn. un accès à des infos d’état riches disponibles à partir des détecteurs VESDA, ainsi que la capacité de contrôler et de configurer ces dispo.

IAS/ILS Aspirator spare part

KILLARK® XAL-53 explosion-proof pull stations are suitable for use in hazardous areas due to the presence of flammable gases or vapors, combustible dust, or easily ignitable fibers.

Sealed lead-acid batteries are used with Xtralis® safety products.

La pile alcaline de rechange OSE-RBA est destinée à être utilisée avec les émetteurs sans fil du détecteur optique linéaire de fumée OSID.

Les boîtiers SB-I/O à montage en surface sont destinés à être utilisés avec les stations de traction Silent Knight® PS-SA et PS-DA.

Black polyethylene tubings by Xtralis has an inner dia of ½ inch and outer dia of 3/8 inch.

Les détecteurs de monoxyde de carbone (CO) CO1224T avec Real Test® utilisent une cellule de détection électrochimique extrêmement précise et fiable pour fournir un avertissement précoce des niveaux de CO dangereux.

L-Series strobes are rich with features guaranteed to cut installation times with its lower current draw and modern aesthetics.

Les batteries série BAT sont des batteries Power-Sonic. Les batteries série BAT (ou marque Power-Sonic) sont recommandées pour l'alimentation secondaire ou l'alimentation de secours de tous les équipements de contrôle d'alarme incendie NOTIFIER®.

302 Series rate-anticipation heat detectors operate within a controlled range of two to three degrees of their setpoints, regardless of the rate of temperature rise. These detectors are available in either 135 °F (57.2 °C) or 194 °F (90 °C) ratings.

The VSP-971 are the smoke sensor modules for the VESPA-E VEA-40. The VESDA-E VEA series of aspirated detectors combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options.

L-Series trim rings provide additional space within the backbox. The design is universal across the L-series notification appliance line and supports indoor horns, horn strobes, chimes, chime strobes, strobes, speakers, and speaker strobes.

Capteurs de rechange pour les gammes de détecteurs de gaz Sensepoint XCL et Sensepoint XRL

Accessoires et pièces de rechange courants pour Sensepoint, Sensepoint XCD, Sensepoint XRL, Series 3000, OELD et RAEGuard 2

Émetteur de gaz industriel compatible Bluetooth

L'transmetteur permet une surveillance complète des dangers liés aux gaz toxiques, aux gaz combustibles et à l'oxygène dans les atmosphères potentiellement explosives, en intérieur comme en extérieur. • Résumé des caractéristiques

FSX™ fire and flame detectors sense the WideBand IR™ radiant energy of blackbody particulate and molecular emissions generated by both hydrocarbon and nonhydrocarbon flames and fires.

The Duct Mounting Kits provides installation of sensors directly into ducts with diameters from 3 to 16in.

DH24120 electromagnetic fire door holders are available in various mounting styles and finishes.

FSL100 test lamps are rechargeable, handheld IR and UV radiation sources that are specifically designed to test Honeywell FSL100 series flame detectors. Their range is approximately 4 meters (13 ft).

Multi-Spectrum™ SS4 electro-optical fire detectors are fast reacting, digital, configurable, computerized “smart” units.

DHE - series from Notifies is a range of Door Holder Extension Rods for the DH24120 Series Electromagnetic Door Holders. The DH – Series provides a wide range of Door Holder Extension Rods with various lengths and Multiple finished.

Accessoires et pièces de rechange de test, de montage et d’interface pour les détecteurs de flamme FS20X et FS24X

Xtralis the manufacturer of the market leading VESDA Aspirating Smoke Detection (ASD) technology has developed with its sister company

HPACM power distribution modules distribute one 12 to 24V AC or DC input over eight independently controlled fuse protected outputs. The outputs can also be configured as dry Form C contacts.

Blank Sub-Unit are an integral part of Sub-Rack Remote Display Assemblies.

L-Series universal expander plates cut costs and speed installation on emergency communications applications that require fire and emergency warnings by combining the functions of multiple devices on a single mounting plate and backbox.

H2 Calibration Gas Cyclinder

CH4 Calibration Gas Cyclinder

Honeywell Analytics are designed to ensure optimal performance from each of their gas detection devices. For this they developed/provide gas calibration kits. Which contain gas calibration cylinders.

The InnovairFlex™ Series are the only duct smoke detectors flexible enough to fit configurations from square to rectangular and everything in between.

HPTCOVER transformer enclosures are used in applications where the installation requires a plug-in transformer to be securely affixed to an AC wall outlet.

The RS 485 Connector Cable is available for MNS-Control

Duct Sampling Kit includes 3 tube mounting plates, compression fittings, adaptors, elbows and reducers for use with XAS2-US, inlet and exhaust tubes and flexible tubing.

The UL/CSA Aluminum 3 wire Junction Box Assemblies are optional accessories that can be used for remote sensor mounting.

VLI display with no relays

Rosace seule pour capillaire (discrète)

The Relay Module provides 8 DPDT relays for the indirect activation of fans, louvers, etc. at programmable alarm levels.

MR Series multi-voltage single SPDT control relays offer 10A contacts, which may be operated by one of four input control voltages.

Gas Controller And Networkable Sensors With Auto-Diagnostic Capabilities, Robust And Reliable Communication, Acts As A Controller For Up To 20 Remote Sensors And Suits A Variety Of Gas Detection System Solutions For Mechanical Rooms

Designed for simple installation and operation, 301C controllers continuously monitor and control toxic gases, combustible gases. and oxygen hazards.

Gas cartridge assemblies intended for use in E3Point gas sensors.

FM-Series electromagnetic door holder spacers are used, when necessary, for the installation of remote door release systems.

L-Series 4-Wire horn strobes are intended for full building notification as well as on the property ground.

Les carillons stroboscopiques de la série L sont des dispositifs de notification en mode privé utilisés pour alerter le personnel formé afin d’enquêter sur les situations d’urgence possibles et de prendre les mesures appropriées.

Les détecteurs de chaleur mécaniques de la série 5600 offrent une protection des biens contre l’incendie et sont destinés aux installations qui n’ont pas trait à la sécurité des personnes où les détecteurs de fumée sont inappropriés.

Modular Network Adapter

Les câbles FTDI du détecteur de faisceau OSID permettent la connexion d’un PC avec un logiciel de diagnostic OSID à l’imageur.

100 Series conventional heat detectors offer superb performance and reliability in a sleek, low-profile design.

Le relais local VESDA-E VEA StaX permet la signalisation des emplacements d'alarme à partir des détecteurs via des relais et fournit un montage pour les modules d'entrée de boucle de panneau d'incendie à l'intérieur de l'armoire.

The sensor covers are spares designed for VESDA Sensepoint XCL Micro Bore ASD System gas detectors.

The 301-ADI Analog to Digital Converters are microcontroller based converter units for use with Honeywell control units . They come with 3 LED indicators, 16 (loop) inputs that read 4-20mA signals and 8 contact inputs that read contact.

FP-WHITE faceplates are designed for use with Silent Knight® addressable modules. They better compliment the design aesthetics of a modern building and also match white System Sensor® L-Series AV devices.

AP-P adapter plates are decorative plastic adapters for mounting 302 Series detectors to four-inch outlet boxes.

FM Series electromagnetic door holder by Fire-Lite are designed for virtually any remote door release application. They are primarily used to hold fire and smoke barrier doors open until released by a remote smoke detector or other switching device.

Sub Rack configurations include the options for both “front” and “back” modules. Front module is a display, programmer, or VESDAnet socket and Back modules are remote termination cards with a variety of relay options

VLC VN Display by Xtralis is a part of spare modules for VESDA Sub Rack Configurations.

CO detector replacement plate to cover the footprint of previously installed detectors.

E³Point Accessories offers ECLAB Splash Guard Enclosures.

Un film anti-condensation est un film facile d’application assurant une résistance durable contre la condensation sur la lentille acrylique de l’émetteur OSID.

Reversing relay and synchronization modules enhance the operation of 2- and 4-wire i³™ Series detectors equipped with a sounder.

Turn latch locks are for use with Silent Knight® EVS-LOC local operator consoles. They are not intended for UL installations.

VBC-001 is a battery cabinet that takes up to 4 batteries of 12 Vdc, 12 Amp/h

Sensepoint XCD Calibration Kits are specially designed for monitoring gases along with Honeywell Analytics' sensors in potentially hazardeous or explosive atmosphere.

VESDA Power Supply is capable of providing operating power, including battery backup, for the entire line of VESDA by Xtralis Aspirating Smoke Detectors.

Expand the versatility of the InnovairFlex™ line of duct smoke detectors with System Sensor notification and test accessories.

VESDA Sensepoint XCL Replacement Filter

HP400UL Series power-limited supplies/chargers convert 115V AC/60 Hz input into a power-limited 12V DC or 24V DC output at 4A.

Xtralis ICAM Accessories offers Medium and fine filter elements for the internal filters inside the ICAM IFT, ICAM IAS and ICAM ILS series detectors. Replacement filters elements are available in pack of 10 with Black colour

VSR-1 is a Programmer with remote termination card and without any relay.

Les mini avertisseurs sonores de la série SpectrAlert® Advance sont conçus pour simplifier les installations afin de fournir une signalisation primaire et secondaire pour les applications de sécurité et d’incendie.

Gas Calibration Kit

Honeywell Analytics 1309K0002 calibration kits are designed to ensure optimal performance from each of their gas detection devices.

AirSCan IRF9 Sensor by Honeywell Analytics is a range of Infrared diffusion-based gas detection that enables thermal stability and freedom from vibration. The IRF9 satisfies AB32 California code and is CARB compliant.

MNS Indoor Display's are LED message centers designed for light industrial, commercial and office use

Les diffuseurs sonores muraux, compacts, basse fréquence de la série L comprennent une variété d’équipements qui augmentent la polyvalence de leur application tout en simplifiant l’installation.

L-Series compact wall strobes are rich with features guaranteed to cut installation times with its lower current draw and modern aesthetics.

TR-1 trim ring assemblies are for use with Gamewell-FCI® Flex 4-zone fire alarm control panels (FACPs). They allow semi-flush mounting of the cabinet. Red and black options are available.

Ivory faceplates are sold in packs of ten. All faceplates are unmarked (without logos).

HPP31076 Optional Class A (Style Z) are optional adapters to connect four Class A (Style Z) NAC circuits.

VSP-878 adapter kits are designed to allow the VSP-877 flush-mount sampling points to be used with larger 1/2-inch capillary tubing.

SP-2B MNS Announcement Evacuate sign is slim 2-1/2 deep box is made of steel, is painted white and is designed for surface mounting. The messages are printed in clear within a black box on clear film.

1309-0071

LF42241 single-zone duct sampling kits are for use with XAS air sampling units. They include three tube-mounting plates, compression fittings, adaptors, elbows, inlet and exhaust tubes, flexible tubing, and reducers for use with XAS2-US.

Pipe – 3⁄4”

VESDA Pipe and Fittings are part of an integrated system manufacturedfrom specialty plastics designed for use with most aspirating smoke detectionsystems, the VESDA VLP system in particular

LF422 flexible single core tubing provides 1/2-inch inner diameter flexible tubes for use with XAS units in duct sampling.

The LED Array Series Indoor Displays are LED message centers designed for light industrial, commercial, and office use. They quickly display large amounts of information in eight colors and three rainbow effects.

XCD RFD Transmitter by Alerton is a remote flammable detection system for LEL monitoring applications.

Refrigerant Gas Sensor is a discreet design and rugged ABS-Polycarbonate housing for the 301IRFS set the standard for the source gas detection in a chiller room.

VESDA Sensepoints XCL are Micro Bore ASD System gas detectors come complete with the main detector unit (pre- installed with sensor cartridge), two cable glands, calibration/flow cap, flexible tube and tube clips to connect to VEA tubing.

SB-SPC8 tile support brackets are designed for use with L-Series SPCW8 8-inch dual-voltage speakers. These brackets offer support for ceiling tile installations.

Aspirated Gas Detection for Micro Bore ASD System (VESDA-E VEA Addressable Aspirating Smoke Detection) and When used with the VESDA-E VEA.

L-Series speaker strobes reduce costly ground faults using a plug-in design and universal mounting plate that allow the installer to pre-wire mounting plates, dress wires, and confirm wiring continuity before plugging in the speakers.

The MegaDot Display offers message clarity from a 200 ft. (61 m) distance allowing you to visually connect with your employees or customers. the MegaDot uses 10.2cm tall characters for dazzling, moving colour messages you know everyone will notice

SpectrAlert® outdoor selectable output speaker strobes provide a broad frequency response range, low harmonic distortion, and maintain a high sound pressure level at all tap settings to provide accurate broadcast of evacuation messages.

Honeywell’s Touchpoint™ plus controllers bring a whole new control experience to your small system of gas detectors. Its modular approach enables you to take control and configure what you need for a wide range of applications.

VESDA® pipes and fittings make up a network of dependable specialty piping that constantly and efficiently carries air samples from protected zones to highly sensitive detectors.

VSP benchmark test points placed along the pipes run from the ASD and provide a means to validate the integrity of the system and pipe network.

Transformer

VESDA Sensepoint XCL Micro Bore provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats.

OSID-SK

The Demand Flow Regulator is used for regulation of gas for cyclinders ranging from 58-103L.

Retardant Microbore Tubing is 1/4" UL Listed for use with VFT-15 detector. It is available in 500 & 1000 ft.

The VESDA 19inch Sub rack Enclosure is designed to house up to 12 display and/or programmer modules, VESDAnet sockets, or relay only modules in a wide variety of confi gurations to suit the particular requirements of a site.

Les détecteurs de fumée à 4 fils de la série i³™ avec capteurs thermiques fixes, diffuseurs sonores et relais appliquent les principes directeurs de facilité d'installation, d'intelligence et d'inspection instantanée.

Les détecteurs de fumée à 4 fils la série i³™ avec capteurs thermiques fixes et diffuseurs sonores appliquent principes directeurs facilité installation, intelligence et inspection instantanée dans une série d'appareils conventionnels spécialisés.

Sensepoint XCL are fixed point gas leak detectors that are designed to meet the needs of commercial and light industrial applications. They are perfect solution for CO and NO2 detection.

TEST-1A

SpectrAlert® outdoor selectable output speaker strobes provide a broad frequency response range, low harmonic distortion, and maintain a high sound pressure level at all tap settings to provide accurate broadcast of evacuation messages.

The class covers introductions to the Farenhyt Series Black panels. It focuses on the IFP-2100, with an overview of the HFSS software, IFP Networking, and ECS products and programming.

B116LP bases are plug-in bases for use with System Sensor® ionization detector heads and System Sensor photoelectronic detector heads.

Pipe Kits for VLQ-100 are a comprehensive range of products provided for VLQ Aspirating Smoke Detectors.

EVS-LOC local operator consoles are a powerful addition to any emergency voice system for mass notification purposes.

VESDA ECO (Ex) provides early warning of flammable (alcohols) gas hazards to protect personnel and property whilst ensuring business continuity.

B114LP bases are for use with System Sensor® photoelectronic detector heads. They are intended for use in 4-wire systems with terminals provided for remote annunciator and relay connections.

D4P120 detectors are designed to operate on 24V DC/V AC or 120V AC. Alarm and supervisory relay contacts are available for control panel interface (alarm initiation), HVAC control, and other auxiliary functions

Les tubes d’échantillonnage ST peuvent être installés à l’avant/à l’arrière des produits de détection de fumée et de surveillance des conduits CVC System Sensor®. Ils se verrouillent et peuvent être retirés en libérant la languette avant ou arrière.

The VSM4 software product are valuable revenue generator for Xtralis distributors.

ASD TXT-SPEECH ENG-JILL US

ASD SITE LIC PRIMARY KIT VSM4

EQBB backbox assemblies are for use with EQ Series cabinets. These assemblies are available in red or black and feature two, three, or four tiers.

Détecteur de gaz esthétique compatible Bluetooth