90521 Line Filter

ANN-MBRLY mounting brackets are for use with NOTIFIER® NFW2-100 fire alarm control panel (FACP) applications.

AP-P adapter plates are decorative plastic adapters for mounting 302 Series detectors to four-inch outlet boxes.

RF-FTX Additional filter accessories are used for HPX-751E HARSH ™ analog addressable aspiration detectors.

AirSCan IRF9 Sensor by Honeywell Analytics is a range of Infrared diffusion-based gas detection that enables thermal stability and freedom from vibration. The IRF9 satisfies AB32 California code and is CARB compliant.

Aspirated Gas Detection for Micro Bore ASD System (VESDA-E VEA Addressable Aspirating Smoke Detection) and When used with the VESDA-E VEA.

Le VSP-963 est un filtre de rechange pour la série VESDA-E VEP.

B110LP detector bases are designed for use with System Sensor® models 2151 photoelectronic and 1151 ionization detector heads. These 2-wire bases are equipped with screw terminals for power, ground, and an optional remote annunciator.

B112LP detector bases are designed for use with System Sensor® models 2151 photoelectronic and 1151 ionization detector heads. These 4-wire bases are equipped with screw terminals for power, ground, and an optional remote annunciator.

B114LP bases are for use with System Sensor® photoelectronic detector heads. They are intended for use in 4-wire systems with terminals provided for remote annunciator and relay connections.

B116LP bases are plug-in bases for use with System Sensor® ionization detector heads and System Sensor photoelectronic detector heads.

Le socle de fixation est nécessaire pour répondre aux exigences locales en matière de code et d'application et pour cela, System Sensor offre des socles standard de 4 po et 6 po.

Les batteries série BAT sont des batteries Power-Sonic. Les batteries série BAT (ou marque Power-Sonic) sont recommandées pour l'alimentation secondaire ou l'alimentation de secours de tous les équipements de contrôle d'alarme incendie NOTIFIER®.

Backboxes are for use with fire alarm control panels (FACPs) and are used to mount up to two batteries and power supplies.

Black polyethylene tubings by Xtralis has an inner dia of ½ inch and outer dia of 3/8 inch.

The Blanking Baffle is used with ICAM IAS aspirating smoke detector.

Les HLI VESDA® Modbus type 3 agissent comme proxy pour ts les dispo. VESDA sur le réseau VESDAnet, en fourn. un accès à des infos d’état riches disponibles à partir des détecteurs VESDA, ainsi que la capacité de contrôler et de configurer ces dispo.

Boîtier de protection IP 66 pour récepteur OSID.Protection contre la poussière, l'humidité et la pénétration d'eau.Équipé d'une vitre limitant l'atténuation du signal UV et IR.

CAC-4 Class A converters are for use with Gamewell-FCI® Flex 404 4-zone fire alarm control panels (FACPs).

CB500 wiring barriers are used to separate power-limited and nonpower-limited wiring inside of junction boxes.

CH4 Calibration Gas Cyclinder

CHS-4L chassis are for use with NOTIFIER® fire alarm control panels (FACPs). They are low-profile, 4-position chassis and mount two AA-30 amplifiers.

CO detector replacement plate to cover the footprint of previously installed detectors.

Couvercle avant en plastique de rechange pour détecteur de fumée VEP-A00-P. Il comporte des DEL pour l’indication.

Le couvercle avant de rechange Xtralis est utilisé avec le détecteur de fumée par aspiration VESDA-E VEP. Il est constitué de plastique avec une taille d’affichage de 3,5 pouces.

Les carillons de sortie sélectionnables de la série L sont des dispositifs de notification en mode privé utilisés pour alerter le personnel formé afin d’enquêter sur des situations d’urgence possibles.

La carte de circuit imprimé du chargeur de batterie et le châssis de montage sont conçus pour être utilisés avec les panneaux de contrôle des alarmes incendie (FACP).

VESDA-E Smoke Detection Chamber

Boîtier de protection IP 66 pour emetteur OSID.Protection contre la poussière, l'humidité et la pénétration d'eau.Équipé d'une vitre limitant l'atténuation du signal UV et IR.

The SENS-RDR utilizes infrared technology to read the sensitivity of i3 and 100 Series conventional detectors.

Les câbles FTDI du détecteur de faisceau OSID permettent la connexion d’un PC avec un logiciel de diagnostic OSID à l’imageur.

DCOIL remote test coils are required for older DNR(W) duct detector housings.

DHE - series from Notifies is a range of Door Holder Extension Rods for the DH24120 Series Electromagnetic Door Holders. The DH – Series provides a wide range of Door Holder Extension Rods with various lengths and Multiple finished.

DH24120 electromagnetic fire door holders are available in various mounting styles and finishes.

DP-51050 dress panels are for use with Fire-Lite® MS-5UD/MS-10UD Series fire alarm control panels (FACPs). They restrict access to the system wiring but allow access to the membrane switch panel.

Detector test magnets simplify detector testing and maintenance

Des algorithmes logiciels sophistiqués et deux microprocesseurs apportent au modèle FS24X les plus hautes performances de détection d'incendie, ainsi qu'un rejet optimal des fausses alarmes. • Résumé des caractéristiques

Le détecteur FS20X, qui fait partie de la gamme de détecteurs de flamme électro-optiques FSX, constitue un énorme bond en avant en matière de technologies de détection infrarouge et ultraviolet. • Résumé des caractéristiques

Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators.

Dispositif de test et de signalisation. Il permet d'effectuer le test d'alarme sur les détecteurs OSID et OSI-RE. Le boîtier RTS151KEYF permet le réarmement local d'un détecteur OSI-RE et OSID.

The Duct Mounting Kits provides installation of sensors directly into ducts with diameters from 3 to 16in.

Duct Sampling Kit includes 3 tube mounting plates, compression fittings, adaptors, elbows and reducers for use with XAS2-US, inlet and exhaust tubes and flexible tubing.

Les détecteurs de chaleur mécaniques de la série 5600 offrent une protection des biens contre l’incendie et sont destinés aux installations qui n’ont pas trait à la sécurité des personnes où les détecteurs de fumée sont inappropriés.

VESDA® VLI early warning aspirating smoke detection systems are designed to protect industrial applications and harsh environments up to 21,520 ft2.

La série i³™ propose des détecteurs de fumée conventionnels avec diffuseur sonore, relais et isolateur inclus.

Les détecteurs de fumée par conduit InnovairFlex™ raccordent une impressionnante collection d'innovations conçues pour vous faire gagner du temps et de l'argent et vous offrir la flexibilité dont vous avez besoin sur le terrain.

Les détecteurs de monoxyde de carbone (CO) CO1224T avec Real Test® utilisent une cellule de détection électrochimique extrêmement précise et fiable pour fournir un avertissement précoce des niveaux de CO dangereux.

The E3 Series cabinet assembly is a compact, wall-mounted enclosure

The E3 Series® Cabinets offer a variety of cabinet options to house either the E3 Series or S3 Series fire alarm control panel systems.

E3Point by Notifier is a range of Toxic/combustible gas monitor that makes a commercial operation run more intelligently to protect people, property and the bottom line.

Gas cartridge assemblies intended for use in E3Point gas sensors.

E³Point Accessories offers ECLAB Splash Guard Enclosures.

The Xtralis VSM4 provide full and comprehensive integration of your VESDA and ICAM smoke and gas detection systems. The VESDA ECO Detector network connection One required per monitored detector.

EQBB backbox assemblies are for use with EQ Series cabinets. These assemblies are available in red or black and feature two, three, or four tiers.

EQDR door assemblies are for use with NOTIFIER® EQ Series cabinets. These vented doors are available in red or black, and feature two, three, or four tiers.

Les éléments de filtre en ligne par Xstralis offrent aux clients de Xtralis la possibilité de traiter un large éventail d’environnements difficiles avec des niveaux élevés de contaminants atmosphériques de manière simple et rentable.

Multi-voltage conventional relays are used for high-current switching applications such as fan and damper assembly control, door control, air handling unit controls, and other types of system interfacing.

End-of-line (EOL) resistors are sold in packs of 10 and are available in 4.7 or 47K Ohm.

Spare Exhaust Adaptor for the VEU series of aspirating smoke detectors.

Exhaust Deflector is a spare part of VESDA VLS detector.

Modules d’extension/alimentation du circuit d’appareil de notification (NAC) pour étendre l'alimentation et la synchronisation NAC existants, tout en alimentant les dispositifs auxiliaires.

Remote power supplies/battery chargers FCPS-24 are compact, cost-effective, 6- or 8-amp remote power supplies with battery chargers.

FM Series electromagnetic door holders are designed for virtually any remote door release application. They are primarily used to hold fire and smoke barrier doors open until released by a remote smoke detector or other switching device.

FM Series electromagnetic door holder by Fire-Lite are designed for virtually any remote door release application. They are primarily used to hold fire and smoke barrier doors open until released by a remote smoke detector or other switching device.

FM-Series electromagnetic door holder spacers are used, when necessary, for the installation of remote door release systems.

FM Series electromagnetic door holders are designed for virtually any remote door release application. They are primarily used to hold fire and smoke barrier doors open until released by a remote smoke detector or other switching device.

FP-WHITE faceplates are designed for use with Silent Knight® addressable modules. They better compliment the design aesthetics of a modern building and also match white System Sensor® L-Series AV devices.

Honeywell's FireLite Alarms Firefighter Phone Jacks are used to mount to a single-gang electrical box. All circuits are power-limited and supervised.

FSX™ fire and flame detectors sense the WideBand IR™ radiant energy of blackbody particulate and molecular emissions generated by both hydrocarbon and nonhydrocarbon flames and fires.

The FT series Replacement Filter Elements are a range of medium and fine filter elements for the internal filters inside the ICAM IFT, ICAM IAS and ICAM ILS series detectors.

The Relay Module provides 8 DPDT relays for the indirect activation of fans, louvers, etc. at programmable alarm levels.

Un film anti-condensation est un film facile d’application assurant une résistance durable contre la condensation sur la lentille acrylique de l’émetteur OSID.

Les filtres VSP-030 sont destinés à être utilisés avec les détecteurs intelligents VESDA® VLI.

Les filtres de test en acrylique OSP-003 sont destinés à être utilisés avec les détecteurs OSID.

Les filtres en ligne VSP 850 offrent aux clients de Xtralis® la possibilité de traiter un large éventail d’environnements difficiles avec des niveaux élevés de contaminants atmosphériques de manière simple et rentable.

VESDA FILTER FOAM ELEMENT, E700-FMK4

XRM optional transformers are designed for use with Fire-Lite® fire alarm control panels.

The trim rings are designed for semi-flush mounting applications, and intended for use with BG-12 Series fire alarm pull stations.

Fire detector protective cover helps prevent malicious or accidental false fire alarms. This unique device has helped prevent false fire alarms around the world for decades.

Fire-Watch 411 Series digital alarm communicator transmitter (DACT) handheld programmers are digital devices used to locally program NOTIFIER® 411 Series DACTs.

ASD SITE LIC PRIMARY KIT VSM4

Les fixations d’objectifs couleur SpectrAlert® Advance sont faciles à installer sur tous les appareils stroboscopiques SpectrAlert® Advance intérieurs ou extérieurs pour fournir une signalisation visuelle distinctive.

Les objectifs couleur de la série L sont disponibles en quatre couleurs : ambre, bleu, vert et rouge. Les objectifs sont compatibles avec les stroboscopes de la série L, y compris la fixation murale ou au plafond.

The Demand Flow Regulator is used for regulation of gas for cyclinders ranging from 58-103L.

Gas Calibration Kit

H2 Calibration Gas Cyclinder

HP400UL Series power-limited supplies/chargers convert 115V AC/60 Hz input into a power-limited 12V DC or 24V DC output at 4A.

HPTCOVER transformer enclosures are used in applications where the installation requires a plug-in transformer to be securely affixed to an AC wall outlet.

Honeywell Analytics 1309K0002 calibration kits are designed to ensure optimal performance from each of their gas detection devices.

Gas Controller And Networkable Sensors With Auto-Diagnostic Capabilities, Robust And Reliable Communication, Acts As A Controller For Up To 20 Remote Sensors And Suits A Variety Of Gas Detection System Solutions For Mechanical Rooms

IAS/ILS Aspirator spare part

Xtralis ICAM Accessories offers Medium and fine filter elements for the internal filters inside the ICAM IFT, ICAM IAS and ICAM ILS series detectors. Replacement filters elements are available in pack of 10 with Black colour

Inline flow restrictor assembly used for refrigerated storage sampling kit. The Xtralis refrigerated storage sampling kit provides a standardised method of smoke sampling for Refrigerated Storage facilities.

2D51 duct smoke detectors are low-profile photoelectric detectors designed for special applications, specifically for use in no-flow or low-flow air-handling systems (0 to 4,000 FPM).

InnovairFlex™ 4-wire photoelectric duct smoke detectors offer 2 sensors to 1 powerboard capability in standard (D4120) and watertight (D4120W) versions.

InnovairFlex™ 2-wire photoelectric duct smoke detectors sense airflow at speeds ranging from 100 to 4,000 ft/min.

D4P120 detectors are designed to operate on 24V DC/V AC or 120V AC. Alarm and supervisory relay contacts are available for control panel interface (alarm initiation), HVAC control, and other auxiliary functions

The InnovairFlex™ Series are the only duct smoke detectors flexible enough to fit configurations from square to rectangular and everything in between.

Installation/removal tools are designed for use with System Sensor® plug-in smoke detectors. They permit installation and removal of detectors in elevated mounting locations.

The Trim Rings are for use with 2351B intelligent detectors and are compatible with B300-6, B300-6-IV, and B210LP 6-inch standard bases.

Ivory faceplates are sold in packs of ten. All faceplates are unmarked (without logos).

KILLARK® XAL-53 explosion-proof pull stations are suitable for use in hazardous areas due to the presence of flammable gases or vapors, combustible dust, or easily ignitable fibers.

Kit de chauffage pour réflecteur (en cas de risque de condensation).

Le kit de montage 6500-MMK permet aux détecteurs linéaires de fumée d’être montés au plafond ou au mur lorsque l'angle de celui-ci avec le réflecteur ou avec l'emetteur est supèrieur à 10°.

Les kits d’installation pour détecteurs OSID comprennent un outil d’alignement laser, un filtre de test, un câble PC, un chiffon de nettoyage et un manuel.

Les kits de cadre de la série L permettent aux installateurs de transformer facilement n’importe quel dispositif d’incendie ou simple de la série L en un dispositif qui répond aux exigences ECN/MNS.

L-Series strobes are rich with features guaranteed to cut installation times with its lower current draw and modern aesthetics.

L-Series speaker strobes reduce costly ground faults using a plug-in design and universal mounting plate that allow the installer to pre-wire mounting plates, dress wires, and confirm wiring continuity before plugging in the speakers.

L-Series compact wall strobes are rich with features guaranteed to cut installation times with its lower current draw and modern aesthetics.

L-Series SPCW8 dual-voltage speakers provides a solution for ceiling mount applications that are used for tap settings that range between 1/8 to 8W. These speakers provide a solution for almost any voice or audio requirement.

L-Series universal expander plates cut costs and speed installation on emergency communications applications that require fire and emergency warnings by combining the functions of multiple devices on a single mounting plate and backbox.

L-Series speaker strobes reduce costly ground faults using a plug-in design and universal mounting plate that allow the installer to pre-wire mounting plates, dress wires, and confirm wiring continuity before plugging in the speakers.

L-Series strobes are rich with features guaranteed to cut installation times with its lower current draw and modern aesthetics.

The LED Array Series Indoor Displays are LED message centers designed for light industrial, commercial, and office use. They quickly display large amounts of information in eight colors and three rainbow effects.

LF422 flexible single core tubing provides 1/2-inch inner diameter flexible tubes for use with XAS units in duct sampling.

MNS Indoor Display's are LED message centers designed for light industrial, commercial and office use

MR Series multi-voltage single SPDT control relays offer 10A contacts, which may be operated by one of four input control voltages.

The MegaDot Display offers message clarity from a 200 ft. (61 m) distance allowing you to visually connect with your employees or customers. the MegaDot uses 10.2cm tall characters for dazzling, moving colour messages you know everyone will notice

The DST family of sampling tubes are pieces of steel piping with a series of holes drilled the entire length of the tube and should extend the entire width of the duct.

VESDA-E VEA microbore tubes are custom made, high quality plenum rated flame retardant polyethylene tubes. They have superior stress crack resistance for reliable long-term performance

VESDA-E VEA Microbore Tube Cutter are used for cutting microbore tubes.

Multi-Spectrum™ SS4 electro-optical fire detectors are fast reacting, digital, configurable, computerized “smart” units.

Multi-voltage conventional relays are used for high-current switching applications such as fans and damper assembly controls, door controls, air handling unit controls, and other types of system interfacing.

Non Scanner Relay Processor Module (DRP) is required if remote relays are not used with display.

Fire Systems Command Interface by Honeywell is the next generation in life safety management for centralized control and monitoring of the fire alarm system.

OSE-HP-01 OSID high power emitters are battery powered and interact with an OSID imager to provide early warning smoke detection.

OSI-LS light shields are available for OSID imagers to prevent saturation from direct or reflected light.

OSID-SK

HPP31076 Optional Class A (Style Z) are optional adapters to connect four Class A (Style Z) NAC circuits.

PRN9200-CABLE is a cable kit assemblies include a DB9M/25F adapter.

La pile alcaline de rechange OSE-RBA est destinée à être utilisée avec les émetteurs sans fil du détecteur optique linéaire de fumée OSID.

Accessoires et pièces de rechange de test, de montage et d’interface pour les détecteurs de flamme FS20X et FS24X

Les points d’échantillonnage Xtralis inviolables de Honeywell minimisent le risque de vandalisme.

Les points d’échantillonnage Xtralis inviolables de Honeywell minimisent le risque de vandalisme.

L’interface des prises VESDAnet est requise lorsqu’une unité standard est utilisée pour fournir une solution flexible lorsqu’un montage permanent n’est pas requis ; dans ce cas, les prises VESDAnet connectent le HLI au réseau VESDAnet.

VSR-1 is a Programmer with remote termination card and without any relay.

The Pyrotector Model 30-2021-24 and Model 30-2021E-24Ultraviolet (UV) Flame Detectors are highly sensitive to the ultraviolet radiation given off by all types of flames, including those produced by flammable liquids and gases.

Reversing relay and synchronization modules enhance the operation of 2- and 4-wire i³™ Series detectors equipped with a sounder.

The RS 485 Connector Cable is available for MNS-Control

Refrigerant Gas Sensor is a discreet design and rugged ABS-Polycarbonate housing for the 301IRFS set the standard for the source gas detection in a chiller room.

Remote Display Module is designed for use with the Laser compact range and it provides real-time indication of the status of a VESDA detector.

Remote Mount Display Modules provides real-time indication of the status of a VESDA detector.

Remote Mount Display without Relay is a VESDA Laser Industrial (VLI) remote display module containing high-intensity, flashing Alarm light-emitting diodes (LEDs).

Remote Mount Configuration is used for VESDA Display Unit

Remote Scan display provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators.

Remote VESDA VLC Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators.

Rosace seule pour capillaire (discrète)

SB-I/O surface-mount backboxes are for use with Silent Knight® PS-SA and PS-DA pull stations.

SB-SPC8 tile support brackets are designed for use with L-Series SPCW8 8-inch dual-voltage speakers. These brackets offer support for ceiling tile installations.

WA7626-CA adapter cables are used to connect GSM antennas to AlarmNet® security and fire alarm systems.

The Notifier SP-4 features four messages Fire, Weather, Announcement and Evacuate.

SP-2B MNS Announcement Evacuate sign is slim 2-1/2 deep box is made of steel, is painted white and is designed for surface mounting. The messages are printed in clear within a black box on clear film.

SSM Series alarm bells are low-current, high-decibel notification appliances for use in fire and burglary systems or other signaling applications.

The STI is an accessories that are been used with STI Stopper II®. The accessories that are been used are conduit gasket and conduit spacer.

SYNC-1 accessory cards are designed to operate with System Sensor® six supervised control modules. Sync-Circuit Modules synchronize SpectrAlert Advance strobes, horns, and chimes over a single pair of wires.

ICAM by Xtralis provides various sampling points for the different applications. The classic sampling points are typically used for cabinet protection.

Scanner Relay Processor Module (DRP) is required if remote relays are not used with display.

Sealed lead-acid batteries are used with Xtralis® safety products.

Seismic Mounting and Bracket Kit

System Sensor Select Series detector color kits offer expanded color options to meet varying aesthetic applications.

Sensepoint XCD Calibration Kits are specially designed for monitoring gases along with Honeywell Analytics' sensors in potentially hazardeous or explosive atmosphere.

Surveillance à distance des gaz toxiques en zones de classe 1, div. 2 tout en réduisant les coûts d'entretien, de formation et globaux de la surveillance des gaz. • Résumé des caractéristiques

Sensepoint XCL are fixed point gas leak detectors that are designed to meet the needs of commercial and light industrial applications. They are perfect solution for CO and NO2 detection.

Replacement dust covers are for use with System Sensor® 100/200 Series smoke detectors.

SpectrAlert® Advance strobes include a variety of features that increase application flexibility and simplify installation, such as field-selectable settings, including candela, and automatic selection of 12 or 24V operation.

SpectrAlert® Advance strobes include a variety of features that increase application flexibility and simplify installation, such as field-selectable settings, including candela, and automatic selection of 12 or 24V operation.

Les avertisseurs sonores stroboscopiques SpectrAlert® Advance à 4 fils sont dotés d'une variété d’équipements qui augmentent la flexibilité de l'application et simplifient l'installation.

The VESDA Sub Rack can be configured in thousands of different way to configure. Then modules will be assembled in the configuration you specify, from left to right. Position 1 is the far left position, while Position 4 is the far right.

The 19 inch rack enclosures are designed to house up to 20 display and programmer modules in a wide variety of configurations to suit the particular requirements of a site where centralised control and monitoring of the VESDA system is required.

Le VSP-960 est utilisé comme support de montage pour le VESDA-E.

Surface backboxes are for use with Fire-Lite® BG-12LR agent release stations.

TEST-1A

VESDA Sample Point Labels are designed to mark the location of sample points. Labels should be placed just above the sample point and positioned so that they are visible without obstruction.

ASD TXT-SPEECH ENG-JILL US

Honeywell’s Touchpoint™ plus controllers bring a whole new control experience to your small system of gas detectors. Its modular approach enables you to take control and configure what you need for a wide range of applications.

Transformer

Les tubes d’échantillonnage ST peuvent être installés à l’avant/à l’arrière des produits de détection de fumée et de surveillance des conduits CVC System Sensor®. Ils se verrouillent et peuvent être retirés en libérant la languette avant ou arrière.

Les points d’échantillonnage à montage encastré VSP-877 offrent une alternative fonctionnellement et esthétiquement améliorée aux points d’échantillonnage coniques utilisés ds les réseaux de tubes de détection de fumée par aspiration (ASD) Xtralis®.

The UL/CSA Aluminum 3 wire Junction Box Assemblies are optional accessories that can be used for remote sensor mounting.

VBC-001 is a battery cabinet that takes up to 4 batteries of 12 Vdc, 12 Amp/h

VSP-972 filters are spare filters for use with VEA aspirating smoke detectors.

The VSP-976 is a display front panel for VESDA-E VEA series of smoke detectors.

The VESDA 19inch Sub rack Enclosure is designed to house up to 12 display and/or programmer modules, VESDAnet sockets, or relay only modules in a wide variety of confi gurations to suit the particular requirements of a site.

Pipe – 3⁄4”

VESDA Power Supply is capable of providing operating power, including battery backup, for the entire line of VESDA by Xtralis Aspirating Smoke Detectors.

Xtralis the manufacturer of the market leading VESDA Aspirating Smoke Detection (ASD) technology has developed with its sister company

VESDA Sensepoints XCL are Micro Bore ASD System gas detectors come complete with the main detector unit (pre- installed with sensor cartridge), two cable glands, calibration/flow cap, flexible tube and tube clips to connect to VEA tubing.

VESDA Sensepoint XCL Micro Bore provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats.

VESDA Sensepoint XCL Replacement Filter

Replacement Sensor for VESDA Sensepoint XCL Detectors.

XCL-XRL-SC-H2 is a VESDA Sensepoint XCL/XRL replacement gas sensor for hydrogen gas.

Standard sampling points are designed for a ceiling with a void where micro bore tubes are run in the void and sampling points are mounted in the ceiling.

VESDA VIC Multi-function Control Cards are interface cards for the range of Xtralis VESDA VIC smoke detectors. They expands the range of input and output communications.

VESDA VLF remote display modules provide real-time indication of the status of a VESDA detector.

VESDA Pipe and Fittings are part of an integrated system manufacturedfrom specialty plastics designed for use with most aspirating smoke detectionsystems, the VESDA VLP system in particular

The VRT-600 is a Remote Mount Display Module designed for use with the Laser PLUS range. Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display..

The VESDA-E VEA series of detectors combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.

VESDA-E FRT COVER VEA-040-A00

The VESDA-E VEA Power Supplies are designed to power the VESDA-E VEA Detector and VESDA-E VEA Relay StaX including battery backup. It provides 24 volt operating power to the VEA unit as well as battery charging function.

VESDA-E VEA RA joiners are right angle joiners for VESDA-E VEA microbore tubes. They come in packs of 10.

VESDA-E VEA sampling point and microbore tube is fully supervised by the detector. VEA sampling points are available in two different type standard and surface mount. It can be used in Healthcare, Offices and Electrical cabinets.

VEA provides assured detection through active sampling and end to end system integrity monitoring.

VESDA-E VEA-40 Mounting Bracket is an accessory for VESDA-E VEA Local Relay StaX.

The VSP-971 are the smoke sensor modules for the VESPA-E VEA-40. The VESDA-E VEA series of aspirated detectors combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options.

Xtralis VESDAnet Socket is a VSR spare module for VESDA sub rack.

VESDAnet™ Remote Relay Modules is a 7 relay version. It consists of 200/100 max no. of devices. It has 1300 m maximum devices between devices.

VESDA® LCD Programmers are menu-driven, allowing the user to conveniently configure, commission, and maintain a VESDA aspirating smoke detection system, as well as program each individual detector.

VESDA® pipes and fittings make up a network of dependable specialty piping that constantly and efficiently carries air samples from protected zones to highly sensitive detectors.

VESDA® VPS100/300 and power supplies are capable of providing operating power, including battery backup, for the entire line of VESDA by Xtralis® aspirating smoke detectors.

VP-CLIP 3/4-inch pipe support clamps are designed for use with VESDA® pipes. They are required for each five foot length of pipe.

VLC VN Display by Xtralis is a part of spare modules for VESDA Sub Rack Configurations.

VLI display with no relays

VPS-300US Power Supply provides power for: up to 3 VESDA VLP or Laser SCANNER detectors, or up to 15 remote (single box) units, or up to 3 sub rack assemblies.

The VSM4 software product are valuable revenue generator for Xtralis distributors.

VSP benchmark test points placed along the pipes run from the ASD and provide a means to validate the integrity of the system and pipe network.

VSP-878 adapter kits are designed to allow the VSP-877 flush-mount sampling points to be used with larger 1/2-inch capillary tubing.

Sub Rack configurations include the options for both “front” and “back” modules. Front module is a display, programmer, or VESDAnet socket and Back modules are remote termination cards with a variety of relay options

Sub Rack Spare Modules are used in 19inch VESDA Sub Racks. Spare modules includes standard display, scanner display & VLC VN display with relays and remote termination card.

Les transformateurs de test Vesda étaient auparavant connus sous le nom de bloc d’alimentation du test de fil chaud. Ils sont utilisés pour tester l’équipement de détection de fumée aspirée à avertissement très précoce.

Vesda Remote Mount Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators

VRT-900 includes blank plates with a remote mounting box and has 12 relay version for VLS.The Remote Box can house a single module with a termination card.

Le détect. VLI combine un filtre intell. à sécurité intég. (brevet en attente) avec une barr. d’air propre avan. pr la protec de l’optique, permet. d’utiliser une détec. absolue et de prolonger la durée de vie de la chambre de détec. ss réétalonnage.

Le filtre en mousse secondaire VLI est une pièce de rechange du filtre secondaire interne pour VESDA VLI.

WFDTN t-tap water flow detectors consist of a rugged, NEMA 4 rated enclosure that is more damage resistant than previous metal designs.

WTP weatherproof plates enable installers to flush-mount outdoor horns, strobes, horn strobes, speakers, and speaker strobes to a variety of wall surfaces, including brick, ceramic tile, concrete, and masonry brick.

XAS smoke detectors provide a flexible detection solution to meet the unique needs of challenging applications found in typical commercial and industrial sites.

LF42241 single-zone duct sampling kits are for use with XAS air sampling units. They include three tube-mounting plates, compression fittings, adaptors, elbows, inlet and exhaust tubes, flexible tubing, and reducers for use with XAS2-US.

XCD Horn/Strobes are allows the addition of audio and visual alarm indications to the XCD transmitter that incorporates relay outputs with 3/4" NPT threaded input ports & They stand alone solution for uncertified and general purpose areas.

XCD RFD Transmitter by Alerton is a remote flammable detection system for LEL monitoring applications.

The sensor covers are spares designed for VESDA Sensepoint XCL Micro Bore ASD System gas detectors.

The VESDA-E VEA Microbore tubes are custom made, high quality plenum rated flame retardant polyethylene tubes that are reliable long-term performance. They are lightweight and flexible for easy handling and installation.

The VESDA-E VEA series of detectors are used for early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.

ZNAC-4 notification appliance circuit (NAC) option modules are Class A conversion modules which mount to J3 connectors on the upper right side of the FCPS-24 (field charger/power supply) circuit board.

VESDA-E Sampling Module

Emetteur OSID - OSE avec pile ou alimentation externe 24 Vcc. Chaque émetteur fournit une séquence lumineuse spécifique combinant 2 longueurs d'onde UV et IR. Chaque émetteur peut ainsi être identifié de façon individuelle par le récepteur.

Étiquette à bande de repérage d'orifice (lot de 200)