4X™F transmitter modules provide output for local energy municipal box transmitters, and alarm and trouble reverse polarity circuits. The modules include a disable switch and disable trouble LED.

6500-SMK surface-mount kits are intended for use with beam detectors to mount transmitters and receivers when using 6500-MMK multi-mounting kits.

7556

The Honeywell 7626-25HC is an AlarmNet 25’ RF antenna coax cable which allows you to mount your AlarmNet GSM-ANT3DB external weatherproof antenna up to 25’ from your cellular or dual path AlarmNet alarm monitoring communicator.

F-A3384-000 air filters are replacement filters for 8000 Series detectors. These filters combine a 30 micron filter element and a plastic housing into a single module that reduces service time and labor.

Key lock door for recessed mount is an accessory for emergency telephone stations.

AFAWS Series accessories for emergency telephone stations include backboxes, latching and locking doors, and break glass inserts.

ANN-MBRLY mounting brackets are for use with NOTIFIER® NFW2-100 fire alarm control panel (FACP) applications.

The ANN-80 annunciator is a compact, backlit, 80-character LCD fire annunciator that mimics the Fire Alarm Control Panel (FACP) display provides system status indicators for AC Power, Alarm, Trouble, Supervisory, and Alarm Silenced conditions

AP-P adapter plates are decorative plastic adapters for mounting 302 Series detectors to four-inch outlet boxes.

Expand the versatility of the InnovairFlex™ line of duct smoke detectors with System Sensor notification and test accessories.

Accessories for Vesda

Adaptateur étanche pour détecteurs de la série F-ECO1000

RF-FTX Additional filter accessories are used for HPX-751E HARSH ™ analog addressable aspiration detectors.

AirSCan IRF9 Sensor by Honeywell Analytics is a range of Infrared diffusion-based gas detection that enables thermal stability and freedom from vibration. The IRF9 satisfies AB32 California code and is CARB compliant.

Les alimentations auxiliaires de Notifier sont utilisées pour le fonctionnement des périphériques des centrales d’alarme de la série ONYX.

Annunciator Key Switches provide access security for the control switches on the LCD-160. Key-switch kit includes key, hardware, and an annunciator label.

Aspirated Gas Detection for Micro Bore ASD System (VESDA-E VEA Addressable Aspirating Smoke Detection) and When used with the VESDA-E VEA.

B110LP detector bases are designed for use with System Sensor® models 2151 photoelectronic and 1151 ionization detector heads. These 2-wire bases are equipped with screw terminals for power, ground, and an optional remote annunciator.

B112LP detector bases are designed for use with System Sensor® models 2151 photoelectronic and 1151 ionization detector heads. These 4-wire bases are equipped with screw terminals for power, ground, and an optional remote annunciator.

The Backbox for Programmable Universal Zone Coder(UZC-256) is used when the UZC will not fit in panel enclosure.

Socle standard pour détecteur conventionnel de la gamme F- ECO1000

Les bases B501 de montage sans bride de 10 cm sont conçues pour détecteurs System Sensor® série 200, à être utilisées avec des systèmes intelligents dotés de bornes à vis pour les connexions d’alimentation (+ et -) et d’indicateurs à distance.

Le socle de fixation est nécessaire pour répondre aux exigences locales en matière de code et d'application et pour cela, System Sensor offre des socles standard de 4 po et 6 po.

Les socles de relais ECO1000 sont destinées aux têtes de sondes System Sensor® ECO1000 et conçues pour fonctionner dans des systèmes à 2 et 4 fils, avec des bornes à vis fournies pour les connexions électriques et le dispositif d’annonce à distance.

Backboxes are for use with fire alarm control panels (FACPs) and are used to mount up to two batteries and power supplies.

Battery Positive Wire connects Battery + TO MPS-24B

Blank Module Dress Plate used to cover annunciator positions or panel positions and also mounts some option modules.

Boîtier de protection IP 66 pour récepteur OSID.Protection contre la poussière, l'humidité et la pénétration d'eau.Équipé d'une vitre limitant l'atténuation du signal UV et IR.

CAC-4 Class A converters are for use with Gamewell-FCI® Flex 404 4-zone fire alarm control panels (FACPs).

CAT 30 Lock with Key

CB500 wiring barriers are used to separate power-limited and nonpower-limited wiring inside of junction boxes.

Spare Components & Misc are power harness cable used to connect the 5000 CPU to MPS

CH4 Calibration Gas Cyclinder

CHS-4L chassis are for use with NOTIFIER® fire alarm control panels (FACPs). They are low-profile, 4-position chassis and mount two AA-30 amplifiers.

CO detector replacement plate to cover the footprint of previously installed detectors.

Spare Components & Misc are transponder power ribbon cable used to connect XPP to option module

La carte de circuit imprimé du chargeur de batterie et le châssis de montage sont conçus pour être utilisés avec les panneaux de contrôle des alarmes incendie (FACP).

Sampling Hole Clips are designed to alleviate such potential issues, by providing a clear, visual indication of sampling point location and its associated hole size.

Le clip pour orifice de prélèvement de réseau d'apsiration permet de choisir simplement et visuellement la taille des orifices (10 diamètres disponibles).

Boîtier de protection IP 66 pour emetteur OSID.Protection contre la poussière, l'humidité et la pénétration d'eau.Équipé d'une vitre limitant l'atténuation du signal UV et IR.

The SENS-RDR utilizes infrared technology to read the sensitivity of i3 and 100 Series conventional detectors.

Les câbles FTDI du détecteur de faisceau OSID permettent la connexion d’un PC avec un logiciel de diagnostic OSID à l’imageur.

DCOIL remote test coils are required for older DNR(W) duct detector housings.

DHE - series from Notifies is a range of Door Holder Extension Rods for the DH24120 Series Electromagnetic Door Holders. The DH – Series provides a wide range of Door Holder Extension Rods with various lengths and Multiple finished.

DH24120 electromagnetic fire door holders are available in various mounting styles and finishes.

The System Sensor DH400OE-1 is a steel enclosure for mounting a standard indoor rated duct smoke detector outdoors.

DP-2 dead front dress panels are for use with Fire-Lite® 411UDAC fire alarm control panels (FACPs). They restrict access to the system wiring but allow access to the membrane switch panel.

DP-51050 dress panels are for use with Fire-Lite® MS-5UD/MS-10UD Series fire alarm control panels (FACPs). They restrict access to the system wiring but allow access to the membrane switch panel.

Black and White detector kits for 200 Series detectors.

Detector test magnets simplify detector testing and maintenance

Des algorithmes logiciels sophistiqués et deux microprocesseurs apportent au modèle FS24X les plus hautes performances de détection d'incendie, ainsi qu'un rejet optimal des fausses alarmes. • Résumé des caractéristiques

Le détecteur FS20X, qui fait partie de la gamme de détecteurs de flamme électro-optiques FSX, constitue un énorme bond en avant en matière de technologies de détection infrarouge et ultraviolet. • Résumé des caractéristiques

Accroître la visibilité, la fiabilité et la facilité d'utilisation de la détection des gaz lors de la transformation et la fabrication industrielle des semi-conducteurs. • Résumé des caractéristiques • Flow Rate: 500 mLmin

Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators.

External dust filters for Midas gas detector are used to protect the tubing from contamination.This End of line particulate filter are used for normal gases .

Dispositif de test et de signalisation. Il permet d'effectuer le test d'alarme sur les détecteurs OSID et OSI-RE. Le boîtier RTS151KEYF permet le réarmement local d'un détecteur OSI-RE et OSID.

La série N-ANN offre une gamme complète de dispositifs d’annonce de relais et de modules de pilote pour s’interfacer avec un panneau de contrôle des alarmes incendie compatible.

The Duct Mounting Kits provides installation of sensors directly into ducts with diameters from 3 to 16in.

Déclencheur MCP3A-R000SF avec membrane pour EA 2b, 3 ou 4 (sans résistance).

Les détecteurs de fumée à 4 fils de la série i³™ avec capteurs thermiques fixes, diffuseurs sonores et relais appliquent les principes directeurs de facilité d'installation, d'intelligence et d'inspection instantanée.

Les détecteurs de fumée à 4 fils la série i³™ avec capteurs thermiques fixes et diffuseurs sonores appliquent principes directeurs facilité installation, intelligence et inspection instantanée dans une série d'appareils conventionnels spécialisés.

Les détecteurs de chaleur mécaniques de la série 5600 offrent une protection des biens contre l’incendie et sont destinés aux installations qui n’ont pas trait à la sécurité des personnes où les détecteurs de fumée sont inappropriés.

Le détecteur de fumée faisceau optique linéaire type réflecteur adressable intel. FS-OSI-RI de NOTIFIER est parfaitmt adapté à protection grdes zones ouvertes avec plafonds élevés, où détecteurs fumée type spot sont difficiles à installer/entretenir.

Les capteurs de fumée optiques ECO1003 utilisent des chambres optiques de pointe avec un circuit intégré spécifique à l’application (ASIC) pour une détection rapide et précise des incendies.

La série i³™ propose des détecteurs de fumée conventionnels, photoélectriques et photo/thermiques aux formats 2 fils et 4 fils.

La série i³™ propose des détecteurs de fumée conventionnels avec diffuseur sonore, relais et isolateur inclus.

Le détecteur multicritères ECO1002 utilise une chambre optique de pointe et un élément thermique combiné à un microprocesseur, exécutant des algorithmes sophistiqués, pour fournir une détection rapide et précise des incendies.

Les détecteurs de fumée par conduit InnovairFlex™ raccordent une impressionnante collection d'innovations conçues pour vous faire gagner du temps et de l'argent et vous offrir la flexibilité dont vous avez besoin sur le terrain.

Les détecteurs de monoxyde de carbone (CO) CO1224T avec Real Test® utilisent une cellule de détection électrochimique extrêmement précise et fiable pour fournir un avertissement précoce des niveaux de CO dangereux.

Les détecteurs themostatiques et thermovélocimétriques de la gamme F-ECO1000 de Honeywell sont conçus pour fournir une information d'alarme en présence d'une élévation significative de la température.

E3Point by Notifier is a range of Toxic/combustible gas monitor that makes a commercial operation run more intelligently to protect people, property and the bottom line.

Gas cartridge assemblies intended for use in E3Point gas sensors.

E³Point Accessories offers ECLAB Splash Guard Enclosures.

System Sensor’s ECO1000 range of detectors have been produced using the latest in manufacturing technology, supplied with an array of advanced feature.

The ECO1005 A detector is a rate of rise sensor, which uses a state of the art thermal element combined with an application specific integrated circuit (ASIC)to provide quick and accurate detection of fires.

Use an End-of-Line device with control panel releasing circuits.

Multi-voltage conventional relays are used for high-current switching applications such as fan and damper assembly control, door control, air handling unit controls, and other types of system interfacing.

End-of-line (EOL) resistors are sold in packs of 10 and are available in 4.7 or 47K Ohm.

Modules d’extension/alimentation du circuit d’appareil de notification (NAC) pour étendre l'alimentation et la synchronisation NAC existants, tout en alimentant les dispositifs auxiliaires.

Remote power supplies/battery chargers FCPS-24 are compact, cost-effective, 6- or 8-amp remote power supplies with battery chargers.

FM Series electromagnetic door holders are designed for virtually any remote door release application. They are primarily used to hold fire and smoke barrier doors open until released by a remote smoke detector or other switching device.

FM Series electromagnetic door holder by Fire-Lite are designed for virtually any remote door release application. They are primarily used to hold fire and smoke barrier doors open until released by a remote smoke detector or other switching device.

FM-Series electromagnetic door holder spacers are used, when necessary, for the installation of remote door release systems.

FM Series electromagnetic door holders are designed for virtually any remote door release application. They are primarily used to hold fire and smoke barrier doors open until released by a remote smoke detector or other switching device.

Honeywell's FireLite Alarms Firefighter Phone Jacks are used to mount to a single-gang electrical box. All circuits are power-limited and supervised.

Photoelectric Smoke Detector is unique optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources. Intelligent (addressable) detectors include point ID capability.

FSX™ fire and flame detectors sense the WideBand IR™ radiant energy of blackbody particulate and molecular emissions generated by both hydrocarbon and nonhydrocarbon flames and fires.

The Relay Module provides 8 DPDT relays for the indirect activation of fans, louvers, etc. at programmable alarm levels.

Un film anti-condensation est un film facile d’application assurant une résistance durable contre la condensation sur la lentille acrylique de l’émetteur OSID.

The trim rings are designed for semi-flush mounting applications, and intended for use with BG-12 Series fire alarm pull stations.

Fire detector protective cover helps prevent malicious or accidental false fire alarms. This unique device has helped prevent false fire alarms around the world for decades.

Fire-Lite® MBT1 municipal box transponder modules are used between a local energy municipal box and a fire alarm control panel.

Fire-Watch 411 Series digital alarm communicator transmitter (DACT) handheld programmers are digital devices used to locally program NOTIFIER® 411 Series DACTs.

Notifier’s firmware upgradations are used for LIB-200A or LIB-200/400 panels.

The Demand Flow Regulator is used for regulation of gas for cyclinders ranging from 58-103L.

Galvanic Isolators are single channel isolated repeater. They are suitable for use as an intrinsically safe isolator between an IMX-1E translator module and up to a maximum of 15 x IDX-751 AE intrinsically safe photoelectric smoke sensors.

Gas Calibration Kit

H2 Calibration Gas Cyclinder

HP400UL Series power-limited supplies/chargers convert 115V AC/60 Hz input into a power-limited 12V DC or 24V DC output at 4A.

HPTCOVER transformer enclosures are used in applications where the installation requires a plug-in transformer to be securely affixed to an AC wall outlet.

The Hardware Interface is used for universal zone coder.

Honeywell Analytics 1309K0002 calibration kits are designed to ensure optimal performance from each of their gas detection devices.

Honeywell Cabinate

Gas Controller And Networkable Sensors With Auto-Diagnostic Capabilities, Robust And Reliable Communication, Acts As A Controller For Up To 20 Remote Sensors And Suits A Variety Of Gas Detection System Solutions For Mechanical Rooms

ISO-6 six fault isolator modules provide six equivalent circuits that will allow a portion of the communications loop to continue operating when a short circuit occurs on that loop.

2D51 duct smoke detectors are low-profile photoelectric detectors designed for special applications, specifically for use in no-flow or low-flow air-handling systems (0 to 4,000 FPM).

InnovairFlex™ 4-wire photoelectric duct smoke detectors offer 2 sensors to 1 powerboard capability in standard (D4120) and watertight (D4120W) versions.

InnovairFlex™ 2-wire photoelectric duct smoke detectors sense airflow at speeds ranging from 100 to 4,000 ft/min.

The InnovairFlex™ Series are the only duct smoke detectors flexible enough to fit configurations from square to rectangular and everything in between.

Installation/removal tools are designed for use with System Sensor® plug-in smoke detectors. They permit installation and removal of detectors in elevated mounting locations.

The NFS-320 intelligent Fire Alarm Control Panel is part of the ONYX® Series of Fire Alarm Controls from notifire.using NFS-320C, an optional ACM Series annunciator can be mounted in the same cabinet.

The Trim Rings are for use with 2351B intelligent detectors and are compatible with B300-6, B300-6-IV, and B210LP 6-inch standard bases.

FST-851 Series Intelligent Plug-in Thermal Detectors by Notifier with integral communication has features that surpass conventional detectors.

Le module isolateur de défaut Notifier ISO-X(A) est utilisé avec les panneaux de contrôle des alarmes incendie (FACP) Notifier Onyx et CLIP pour protéger le système contre les courts-circuits fil à fil sur les boucles SLC.

KILLARK® XAL-53 explosion-proof pull stations are suitable for use in hazardous areas due to the presence of flammable gases or vapors, combustible dust, or easily ignitable fibers.

Le kit de montage 6500-MMK permet aux détecteurs linéaires de fumée d’être montés au plafond ou au mur lorsque l'angle de celui-ci avec le réflecteur ou avec l'emetteur est supèrieur à 10°.

Les kits d’installation pour détecteurs OSID comprennent un outil d’alignement laser, un filtre de test, un câble PC, un chiffon de nettoyage et un manuel.

L-Series universal expander plates cut costs and speed installation on emergency communications applications that require fire and emergency warnings by combining the functions of multiple devices on a single mounting plate and backbox.

The LED Array Series Indoor Displays are LED message centers designed for light industrial, commercial, and office use. They quickly display large amounts of information in eight colors and three rainbow effects.

The 4XLM LED Interface Module supports the RZA-4X remote annunciator module.

MNS Indoor Display's are LED message centers designed for light industrial, commercial and office use

Power Cables are of 6-wire which connects ICA to MPS.

MR Series multi-voltage single SPDT control relays offer 10A contacts, which may be operated by one of four input control voltages.

MPS-TR is a Main Power Supply Trouble Relay for remote mounting of a stand-alone power supply. The MPS-TR Power supply monitor mounts on any of the MPS series power supplies.

The Media Interface Board mounts “piggyback” onto the SIB-NET module. Provides full signal regeneration and amplification. For use with NOTI-FIRE-NET Networks.

The MegaDot Display offers message clarity from a 200 ft. (61 m) distance allowing you to visually connect with your employees or customers. the MegaDot uses 10.2cm tall characters for dazzling, moving colour messages you know everyone will notice

The DST family of sampling tubes are pieces of steel piping with a series of holes drilled the entire length of the tube and should extend the entire width of the duct.

Midas sensor oxygen cartridges are potentially cross sensitive to other gases and this may cause a gas reading when exposed to other gases than those originally designated.

Les modules de commande du téléphone anti-incendie FTM-1(A) avec mode FlashScan® sont conçus pour les centrales d’alarme NFS-640, NFS2-640, NFS-3030 et NFS2-3030. Ils surveillent et contrôlent un circuit avec jusqu'à deux téléphones de pompiers.

Modbus Gateway by Notifier provides a communication link between networks that use the Modbus/TCP communication protocol and Fire Alarm Control Panels (FACPs) resident on an NFN network.

Le module d’entrée analogique FMM-4-20 permet au panneau de contrôle des alarmes incendie (FACP) NFS2-3030 de surveiller les capteurs de protocole 4–20 mA à échelle linéaire standard de l’industrie.

Le module de commande adressable intelligent FCM-1 assure la surveillance supervisée du câblage pour charger dispositifs qui nécessitent alimentation externe pour fonctionner, tq solénoïdes, diffuseurs sonores, stroboscopes ou cloches.

Les modules de GE de libération FCM-1-REL sont conçus pour libération d'extinction dans les systèmes FlashScan®. L’alimentation du/des solénoïde(s) de l’agent de libération passe par le module pour une surveillance et une supervision à temps plein.

Le module de commande de relais FRM-1 est destiné à être utilisé dans les systèmes intelligents à deux fils où l'adresse individuelle de chaque module est sélectionnée à l'aide des interrupteurs à rotation intégrés.

Les modules de surveillance/relais double FlashScan® sont pour panneaux série NOTIFIER ONYX® et CLIP. Chaque sortie de relais est destinée aux applications de commutation de forme C, sans supervision du câblage pour le circuit de charge.

Multi-module cabinets and chassis support up to 6 multi-module boards:

Multi-Spectrum™ SS4 electro-optical fire detectors are fast reacting, digital, configurable, computerized “smart” units.

Multi-Spectrum™ SS2 electro-optical fire detectors provide ultra-high speed responses to explosive fires and feature programming to assure ultra-high speed millisecond response.

Multi-voltage conventional relays are used for high-current switching applications such as fans and damper assembly controls, door controls, air handling unit controls, and other types of system interfacing.

Replacement door used for mounting ACPS-610 (E) in a CAB-PS1 cabinet when replacing ACPS-2406

The NOTIFIER Oynx University training syllabus enables technicians to become proficient in the design, engineering and commissioning of the Notifier system.

The Notifier NAM-232 Network Adapter Module functions as an interface between the AFP-200, AFP-300, and AFP-400 Fire Alarm Control Panels and the NOTI•FIRE•NET™. The network supports communications over a twisted-pair wire or fiber-optic medium.

Noise Control Modules are used to reduce the common noise for example, noise that is present on both conductors on the Signaling Line Circuit (SLC).

The Notifier relay modules provides 10 programmable form-C relays when used with a compatible FACP (Fire Alarm Control Panel).

The Notifier XP6-R six-relay control modules provides a fire alarm system with six Form-C relays. It intelligent, addressable multiple input and output modules are a convenient space saving platform and allow for additional mounting options.

The BRKG-B Breakglass Insert Includes a tempered glass plate, a hammer attached to a chain, and a screw to attach the hammer to the trim ring.

NOTIFIER’s XP6-MA six-zone interface module provides an interface between the intelligent alarm system and a two-wire conventional detection zone.

Notifier OD2030 Hazard Siren System has a 10 digit and DTMF landline.

Fire Systems Command Interface by Honeywell is the next generation in life safety management for centralized control and monitoring of the fire alarm system.

Fire Systems Command Interface by Honeywell is the next generation in life safety management for centralized control and monitoring of the fire alarm system.

OSY2 supervisory switches are used to monitor the open position of an outside screw and yoke type gate valve.

HPP31076 Optional Class A (Style Z) are optional adapters to connect four Class A (Style Z) NAC circuits.

BB-XP is an Optional cabinet for one or two modules.

P40-KITB Mounting Assembly includes chassis, hinged dress plate, two BMP-1 blank plates, and mounting hardware.

PIBV post indicator/butterfly valve supervisory switches feature a rugged housing, intended for indoor and outdoor use.

La centrale 10 zones SFP-10UD avec modules de communications intégrés offre une protection fiable contre les incendies pour les applications de petite à moyenne taille.

La centrale 5 zones SFP-5UD avec modules de communication intégrés offre une protection fiable contre les incendies pour les applications de petite à moyenne taille.

Le RP-2001 est un panneau de contrôle des alarmes incendie à six zones pour les applications d’intempéries et d’action préalable à risque simple et double.

Le RP-2002 est un panneau de contrôle des alarmes incendie à six zones pour les applications de libération d’agent à risque simple et double.

La pile alcaline de rechange OSE-RBA est destinée à être utilisée avec les émetteurs sans fil du détecteur optique linéaire de fumée OSID.

Accessoires et pièces de rechange de test, de montage et d’interface pour les détecteurs de flamme FS20X et FS24X

Intelligent Plug-In smoke Detectors with integral communication provide features that surpass conventional detectors & these Detector sensitivity can be programmed in the control panel software.

Spare Components & Misc bell power cable used to connect the AVPS P3 to ICM J5 ON XPC

Power Supervision Ribbon connects from MPS P3 to EFB-1 P1.

The Notifier 75554 is a laptop to NUP port programming cable. This device connects the NFN Web Server to an NCM-W/F.

The Pyrotector Model 30-2021-24 and Model 30-2021E-24Ultraviolet (UV) Flame Detectors are highly sensitive to the ultraviolet radiation given off by all types of flames, including those produced by flammable liquids and gases.

Reversing relay and synchronization modules enhance the operation of 2- and 4-wire i³™ Series detectors equipped with a sounder.

The RS 485 Connector Cable is available for MNS-Control

The Remote annunciator mounts on a standard single gang box, and provide LED indication of the same functions as the 4XZM zone relay module.

Refrigerant Gas Sensor is a discreet design and rugged ABS-Polycarbonate housing for the 301IRFS set the standard for the source gas detection in a chiller room.

Remote annunciators are designed for both conventional and intelligent applications. Their red LED provides visual indication of an alarm condition.

Remote Display Module is designed for use with the Laser compact range and it provides real-time indication of the status of a VESDA detector.

B401 plug-in detector bases are used with System Sensor® conventional S300 smoke and heat detectors. These bases make detectors more versatile than equivalent direct-wired models.

SB-I/O surface-mount backboxes are for use with Silent Knight® PS-SA and PS-DA pull stations.

SB-10 surface backboxes are for use with Fire-Lite® BG-12LR agent release stations.

SMB600 flanged surface mounting kits may be used with certain System Sensor® smoke detectors when flush or recessed mounting are not possible.

The Notifier SP-4 features four messages Fire, Weather, Announcement and Evacuate.

SP-2B MNS Announcement Evacuate sign is slim 2-1/2 deep box is made of steel, is painted white and is designed for surface mounting. The messages are printed in clear within a black box on clear film.

Amélioration de la sécurité et de la productivité grâce à un système portatif ultra flexible, précis et convivial spécialement conçu pour les produits à faible toxicité. • Résumé des caractéristiques • Poids : 3,86 kg (8,5 lb)

SSM Series alarm bells are low-current, high-decibel notification appliances for use in fire and burglary systems or other signaling applications.

The STI is an accessories that are been used with STI Stopper II®. The accessories that are been used are conduit gasket and conduit spacer.

Sampling Point Kits with conical or flush sampling points.

Seismic Mounting and Bracket Kit

B501 bases are four-inch flangeless mounting bases designed for use with System Sensor® 200 Series detectors. They are intended for use with intelligent systems that have screw terminals for power (+ and -) and remote annunciator connections.

System Sensor Select Series detector color kits offer expanded color options to meet varying aesthetic applications.

Sensepoint XCD Calibration Kits are specially designed for monitoring gases along with Honeywell Analytics' sensors in potentially hazardeous or explosive atmosphere.

Surveillance à distance des gaz toxiques en zones de classe 1, div. 2 tout en réduisant les coûts d'entretien, de formation et globaux de la surveillance des gaz. • Résumé des caractéristiques

Sensepoint XCL are fixed point gas leak detectors that are designed to meet the needs of commercial and light industrial applications. They are perfect solution for CO and NO2 detection.

The N-ANN-S/PG Interface module connects either a serial or parallel printer with a compatible Fire Alarm Control Panel (FACP) to print real-time logs of system events, detector status reports, and event histories.

Replacement dust covers are for use with System Sensor® 100/200 Series smoke detectors.

Spare Components & Misc are battery interconnect cable used to connect the batteries in series

Spare Components & Misc are power supervision to connect the MPS P3 TO CPU

Surface backboxes are for use with Fire-Lite® BG-12LR agent release stations.

TEST-1A

FSL100 test lamps are rechargeable, handheld IR and UV radiation sources that are specifically designed to test Honeywell FSL100 series flame detectors. Their range is approximately 4 meters (13 ft).

Honeywell’s Touchpoint™ plus controllers bring a whole new control experience to your small system of gas detectors. Its modular approach enables you to take control and configure what you need for a wide range of applications.

Transformer

The UL/CSA Aluminum 3 wire Junction Box Assemblies are optional accessories that can be used for remote sensor mounting.

The Universal Zone Coder provides up to 256 different coded outputs. The UZC-256 requires programming software and a hardware PC interface.

VESDA Sensepoints XCL are Micro Bore ASD System gas detectors come complete with the main detector unit (pre- installed with sensor cartridge), two cable glands, calibration/flow cap, flexible tube and tube clips to connect to VEA tubing.

VESDA Sensepoint XCL Micro Bore provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats.

VESDA Sensepoint XCL Replacement Filter

Replacement Sensor for VESDA Sensepoint XCL Detectors.

XCL-XRL-SC-H2 is a VESDA Sensepoint XCL/XRL replacement gas sensor for hydrogen gas.

VESDA-E FRT COVER VEA-040-A00

Sub Rack Spare Modules are used in 19inch VESDA Sub Racks. Spare modules includes standard display, scanner display & VLC VN display with relays and remote termination card.

WCP3A Outdoor Call Point range gives you installation efficiency, flexibility and full compliance with the latest standards.

WFDTN t-tap water flow detectors consist of a rugged, NEMA 4 rated enclosure that is more damage resistant than previous metal designs.

WFDN Series water flow detectors are compatible with schedule 7 through 40 steel pipe, for sizes 2 through 4 inch and compatible with schedule 10 through 40 steel pipe, sizes 5 through 8 inch.

Wire channel provides a pair of wire trays to neatly route wiring between CHS chassis.

XCD Horn/Strobes are allows the addition of audio and visual alarm indications to the XCD transmitter that incorporates relay outputs with 3/4" NPT threaded input ports & They stand alone solution for uncertified and general purpose areas.

XCD RFD Transmitter by Alerton is a remote flammable detection system for LEL monitoring applications.

The sensor covers are spares designed for VESDA Sensepoint XCL Micro Bore ASD System gas detectors.

The Notifier XP10-M ten-input monitor module is an interface between a control panel and normally open contact devices in intelligent alarm systems such as manual call points, break glass alarms, or flow switches.

XP6-C is six circuit supervised control module which provides intelligent alarm systems with supervised monitoring of wiring to load devices that require an external power supply to operate such as horns, strobes or bells.

ZNAC-4 notification appliance circuit (NAC) option modules are Class A conversion modules which mount to J3 connectors on the upper right side of the FCPS-24 (field charger/power supply) circuit board.

The System Sensor A77-AB adapter rings allow installers to retrofit i³™ Series detectors where a larger diameter smoke detector was previously installed.

Les transmetteurs de communication d'alarme numérique universels sont conçus pour être utilisés avec le panneau de contrôle des alarmes incendie NOTIFIER® (y compris les panneaux existants).