Duct Sampling Kit includes 3 tube mounting plates, compression fittings, adaptors, elbows and reducers for use with XAS2-US, inlet and exhaust tubes and flexible tubing.

Détecteur de fumée par aspiration utilisant la technologie laser sur des surfaces allant jusqu’à 250m².Sur une ECS adressable ces informations sont transmises via un dispositif d'entrée/sortie sur esserbus® ou esserbus-Plus®.

Détecteur de fumée par aspiration utilisant la technologie laser sur des surfaces allant jusqu’à 500m².Sur une ECS adressable ces informations sont transmises via un dispositif d'entrée/sortie sur esserbus® ou esserbus-Plus®.

VESDA® VLI early warning aspirating smoke detection systems are designed to protect industrial applications and harsh environments up to 21,520 ft2.

The Xtralis VSM4 provide full and comprehensive integration of your VESDA and ICAM smoke and gas detection systems. The VESDA ECO Detector network connection One required per monitored detector.

Les éléments de filtre en ligne par Xstralis offrent aux clients de Xtralis la possibilité de traiter un large éventail d’environnements difficiles avec des niveaux élevés de contaminants atmosphériques de manière simple et rentable.

Spare Exhaust Adaptor for the VEU series of aspirating smoke detectors.

Exhaust Deflector is a spare part of VESDA VLS detector.

The FT series Replacement Filter Elements are a range of medium and fine filter elements for the internal filters inside the ICAM IFT, ICAM IAS and ICAM ILS series detectors.

Un film anti-condensation est un film facile d’application assurant une résistance durable contre la condensation sur la lentille acrylique de l’émetteur OSID.

Les filtres VSP-030 sont destinés à être utilisés avec les détecteurs intelligents VESDA® VLI.

Les filtres de test en acrylique OSP-003 sont destinés à être utilisés avec les détecteurs OSID.

Les filtres VSP-972 sont des filtres de rechange à utiliser avec les détecteurs de fumée par aspiration VEA.

Les filtres en ligne VSP 850 offrent aux clients de Xtralis® la possibilité de traiter un large éventail d’environnements difficiles avec des niveaux élevés de contaminants atmosphériques de manière simple et rentable.

ASD SITE LIC PRIMARY KIT VSM4

Xtralis ICAM Accessories offers Medium and fine filter elements for the internal filters inside the ICAM IFT, ICAM IAS and ICAM ILS series detectors. Replacement filters elements are available in pack of 10 with Black colour

Inline flow restrictor assembly used for refrigerated storage sampling kit. The Xtralis refrigerated storage sampling kit provides a standardised method of smoke sampling for Refrigerated Storage facilities.

Utilisé comme une alternative à l’unité de programmation. Tous les composants du VESDAnet peuvent être paramétrés via l’interface.

Les kits d’installation pour détecteurs OSID comprennent un outil d’alignement laser, un filtre de test, un câble PC, un chiffon de nettoyage et un manuel.

LF422 flexible single core tubing provides 1/2-inch inner diameter flexible tubes for use with XAS units in duct sampling.

Blank Sub-Unit are an integral part of Sub-Rack Remote Display Assemblies.

Le coupe-tubes micro-perforé VESDA-E VEA est utilisé pour couper les tubes micro-perforés.

VESDA-E VEA microbore tubes are custom made, high quality plenum rated flame retardant polyethylene tubes. They have superior stress crack resistance for reliable long-term performance

Non Scanner Relay Processor Module (DRP) is required if remote relays are not used with display.

OSID-SK

La pile alcaline de rechange OSE-RBA est destinée à être utilisée avec les émetteurs sans fil du détecteur optique linéaire de fumée OSID.

Pt é VESDA-E VEA et t m. ent. sp. Les points d'échantillonnage VEA sont disponibles en deux types différents de montage standard et de montage en surface. Il peut être utilisé dans les établissements de santé, les bureaux et les armoires électriques.

Les points d'échantillonnage standard sont conçus pour un plafond avec un vide où des tubes à micro-alésage sont utilisés dans le vide et où les points d'échantillonnage sont montés au plafond.

Les points d’échantillonnage Xtralis inviolables de Honeywell minimisent le risque de vandalisme.

Les points d’échantillonnage Xtralis inviolables de Honeywell minimisent le risque de vandalisme.

VSR-1 is a Programmer with remote termination card and without any relay.

Les raccords VESDA-E VEA RA sont des raccords à angle droit pour les tubes micro-perforés VESDA-E VEA. Ils sont livrés par lot de 10.

Remote Mount Configuration is used for VESDA Display Unit

Rosace seule pour capillaire (discrète)

ICAM by Xtralis provides various sampling points for the different applications. The classic sampling points are typically used for cabinet protection.

Scanner Relay Processor Module (DRP) is required if remote relays are not used with display.

Sealed lead-acid batteries are used with Xtralis® safety products.

The VESDA Sub Rack can be configured in thousands of different way to configure. Then modules will be assembled in the configuration you specify, from left to right. Position 1 is the far left position, while Position 4 is the far right.

The 19 inch rack enclosures are designed to house up to 20 display and programmer modules in a wide variety of configurations to suit the particular requirements of a site where centralised control and monitoring of the VESDA system is required.

Le VSP-960 est utilisé comme support de montage pour le VESDA-E.

VESDA Sample Point Labels are designed to mark the location of sample points. Labels should be placed just above the sample point and positioned so that they are visible without obstruction.

ASD TXT-SPEECH ENG-JILL US

Les points d’échantillonnage à montage encastré VSP-877 offrent une alternative fonctionnellement et esthétiquement améliorée aux points d’échantillonnage coniques utilisés ds les réseaux de tubes de détection de fumée par aspiration (ASD) Xtralis®.

VBC-001 is a battery cabinet that takes up to 4 batteries of 12 Vdc, 12 Amp/h

The VSP-976 is a display front panel for VESDA-E VEA series of smoke detectors.

The VESDA 19inch Sub rack Enclosure is designed to house up to 12 display and/or programmer modules, VESDAnet sockets, or relay only modules in a wide variety of confi gurations to suit the particular requirements of a site.

Pipe – 3⁄4”

VESDA Modbus HLI Wall Mount is housed in a metal enclosure allowing for permanent mounting on a flat surface.

VESDA Power Supply is capable of providing operating power, including battery backup, for the entire line of VESDA by Xtralis Aspirating Smoke Detectors.

Xtralis the manufacturer of the market leading VESDA Aspirating Smoke Detection (ASD) technology has developed with its sister company

VESDA Sensepoints XCL are Micro Bore ASD System gas detectors come complete with the main detector unit (pre- installed with sensor cartridge), two cable glands, calibration/flow cap, flexible tube and tube clips to connect to VEA tubing.

VESDA Sensepoint XCL Micro Bore provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats.

VESDA Sensepoint XCL Replacement Filter

Replacement Sensor for VESDA Sensepoint XCL Detectors.

XCL-XRL-SC-H2 is a VESDA Sensepoint XCL/XRL replacement gas sensor for hydrogen gas.

VESDA VIC Multi-function Control Cards are interface cards for the range of Xtralis VESDA VIC smoke detectors. They expands the range of input and output communications.

VESDA Pipe and Fittings are part of an integrated system manufacturedfrom specialty plastics designed for use with most aspirating smoke detectionsystems, the VESDA VLP system in particular

The VESDA-E VEA series of detectors combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.

VESDA-E FRT COVER VEA-040-A00

The VESDA-E VEA Power Supplies are designed to power the VESDA-E VEA Detector and VESDA-E VEA Relay StaX including battery backup. It provides 24 volt operating power to the VEA unit as well as battery charging function.

VEA provides assured detection through active sampling and end to end system integrity monitoring.

VESDA-E VEA-40 Mounting Bracket is an accessory for VESDA-E VEA Local Relay StaX.

The VSP-971 are the smoke sensor modules for the VESPA-E VEA-40. The VESDA-E VEA series of aspirated detectors combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options.

Xtralis VESDAnet Socket is a VSR spare module for VESDA sub rack.

VESDA® LCD Programmers are menu-driven, allowing the user to conveniently configure, commission, and maintain a VESDA aspirating smoke detection system, as well as program each individual detector.

VESDA® pipes and fittings make up a network of dependable specialty piping that constantly and efficiently carries air samples from protected zones to highly sensitive detectors.

VESDA® VPS100/300 and power supplies are capable of providing operating power, including battery backup, for the entire line of VESDA by Xtralis® aspirating smoke detectors.

VP-CLIP 3/4-inch pipe support clamps are designed for use with VESDA® pipes. They are required for each five foot length of pipe.

VLC VN Display by Xtralis is a part of spare modules for VESDA Sub Rack Configurations.

VLI display with no relays

VPS-300US Power Supply provides power for: up to 3 VESDA VLP or Laser SCANNER detectors, or up to 15 remote (single box) units, or up to 3 sub rack assemblies.

The VSM4 software product are valuable revenue generator for Xtralis distributors.

VSP benchmark test points placed along the pipes run from the ASD and provide a means to validate the integrity of the system and pipe network.

VSP-878 adapter kits are designed to allow the VSP-877 flush-mount sampling points to be used with larger 1/2-inch capillary tubing.

Sub Rack configurations include the options for both “front” and “back” modules. Front module is a display, programmer, or VESDAnet socket and Back modules are remote termination cards with a variety of relay options

Sub Rack Spare Modules are used in 19inch VESDA Sub Racks. Spare modules includes standard display, scanner display & VLC VN display with relays and remote termination card.

Les transformateurs de test Vesda étaient auparavant connus sous le nom de bloc d’alimentation du test de fil chaud. Ils sont utilisés pour tester l’équipement de détection de fumée aspirée à avertissement très précoce.

Le détect. VLI combine un filtre intell. à sécurité intég. (brevet en attente) avec une barr. d’air propre avan. pr la protec de l’optique, permet. d’utiliser une détec. absolue et de prolonger la durée de vie de la chambre de détec. ss réétalonnage.

Le filtre en mousse secondaire VLI est une pièce de rechange du filtre secondaire interne pour VESDA VLI.

XAS smoke detectors provide a flexible detection solution to meet the unique needs of challenging applications found in typical commercial and industrial sites.

LF42241 single-zone duct sampling kits are for use with XAS air sampling units. They include three tube-mounting plates, compression fittings, adaptors, elbows, inlet and exhaust tubes, flexible tubing, and reducers for use with XAS2-US.

The sensor covers are spares designed for VESDA Sensepoint XCL Micro Bore ASD System gas detectors.

Xtralis Smoke detector is an interface card for the range of Xtralis VESDA VLF smoke detectors. Multi-function Control Card expands the range of input and output communications a VLF detector can perform.

The VESDA-E VEA Microbore tubes are custom made, high quality plenum rated flame retardant polyethylene tubes that are reliable long-term performance. They are lightweight and flexible for easy handling and installation.

The VESDA-E VEA series of detectors are used for early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.

VESDA-E Sampling Module

Emetteur OSID - OSE avec pile ou alimentation externe 24 Vcc. Chaque émetteur fournit une séquence lumineuse spécifique combinant 2 longueurs d'onde UV et IR. Chaque émetteur peut ainsi être identifié de façon individuelle par le récepteur.

Étiquette à bande de repérage d'orifice (lot de 200)