B-Sized marine cabinet comes with 12 gauge steel door and 6 gauge black box. These cabinets are available with a Notifier logo.

BATTERYCABIN1

Snap-in locks are for use with Fire-Lite® BG-8 Series manual fire alarm call points and prevent restoring the activated alarm to normal except by use of a key.

The Backbox for Programmable Universal Zone Coder(UZC-256) is used when the UZC will not fit in panel enclosure.

Battery Box for Batteries Larger than 25 AH

Blank Module Dress Plate used to cover annunciator positions or panel positions and also mounts some option modules.

Cabinet Door Assembly for Johnson Controls CAB-4 Series cabinets. Door Assembly is available in red and black colour.

CAB-M series marine enclosures are designed to house the AFP-200, AM 1010 or AM 2020 intelligent fire control panels in marine shipboard environments were dirt, dust, oil, water or other contaminants are present.

CAT 30 Lock with Key

CHS-4L chassis are for use with NOTIFIER® fire alarm control panels (FACPs). They are low-profile, 4-position chassis and mount two AA-30 amplifiers.

DP-2 dead front dress panels are for use with Fire-Lite® 411UDAC fire alarm control panels (FACPs). They restrict access to the system wiring but allow access to the membrane switch panel.

DP-9692 dress panels are for use with Fire-Lite® MS-9200UDLS fire alarm control panels (FACPs). They mount to the inside of the cabinet and restrict access to the system wiring while allowing access to the key panel.

DP-ES-R dress panels are for use with NOTIFIER® fire alarm control panels (FACPs). They mount to the inside of the cabinet and restrict access to the system wiring while allowing access to the key panel.

Accroître la visibilité, la fiabilité et la facilité d'utilisation de la détection des gaz lors de la transformation et la fabrication industrielle des semi-conducteurs. • Résumé des caractéristiques • Flow Rate: 500 mLmin

The E3 Series cabinet assembly is a compact, wall-mounted enclosure

The E3 Series® Cabinets offer a variety of cabinet options to house either the E3 Series or S3 Series fire alarm control panel systems.

FS90 Retrofit Kit for a large FS90 cabinet. Kit includes an equipment back plate, dress plate, brackets and hardware, and large cabinet door with lock and key.

The Resistor R-47k is a part of Fire-Lite Communicator Accessory. It has a resistance of 47k ohms.

HPTCOVER transformer enclosures are used in applications where the installation requires a plug-in transformer to be securely affixed to an AC wall outlet.

Intelligent Fire Integrator™ Enclosure is designed for housing components.

The NFS-320 intelligent Fire Alarm Control Panel is part of the ONYX® Series of Fire Alarm Controls from notifire.using NFS-320C, an optional ACM Series annunciator can be mounted in the same cabinet.

Ivory faceplates are sold in packs of ten. All faceplates are unmarked (without logos).

JADDR Series Doors are designed for use with the CA-2 chassis configuration. JADDR Series doors are similar to CAB-4 Series “DR” doors, but a clear window space exposes the top two tiers of the CAB-4 enclosure.

Notifier Retrofit Mounting Kit is used for mounting the NCA-2 Network Control Annunciator to a DPDISP dress plate.

Replacement door used for mounting ACPS-610 (E) in a CAB-PS1 cabinet when replacing ACPS-2406

ONYX FirstVision™ backbox enclosure and door is used for perfect and secure mounting of ONYX FirstVision™ Interactive Firefighters’ Display system.

The LEXAN model provides a tasteful combination to accent the decor of the finest lobby setting.

The Onyx Series Surface Mount Backboxes are an attractive range of backbox for mounting one ACS Series Annunciators. They have an increased depth that allows mounting of the AKS-1B Annunciator Key Switches.

BB-XP is an Optional cabinet for one or two modules.

Remote Mount Configuration is used for VESDA Display Unit

SMB500 surface-mount boxes are for use with System Sensor® modules when flush or recessed mounting is not possible.

The semiflush-mount backboxes is used for ACS Series Annunciators. The backboxes mounts one annunciator module.

TR-5

Universal end-of-line (EOL) device mounting plates are used to place the EOL device at an accessible height.

The VESDA IP66 Enclosure is Required To Complement. To complement the VESDA range of detectors, displays and programmers, an IP66 enclosure is available.

Battery Box (required for batteries larger than 26 AH)

XLS-ADDR Door Assemblies are designed for use with the CA-2 chassis configuration. XLS-ADDR Door Assemblies are available in two, three and four tiers.

C58-379-00 dust covers are for use with System Sensor® i³™ Series photoelectric smoke detectors.