The enclosure has a glazed lockable door and an internal swing frame to allow easy access to the back of the sub rack.
257 covers are extension cover kit for zone display module
3U blank cover for 19in rack mounting
ZX1/2Se retrofit 4 line display kit including display plate and overlay.
The 6U blind cover for mounting the 4.5A power supply or 7A
The 6U blank cover for 19 rack mounting.
The Rack Blank Cover with Printer provision (Adapter plate and cover).
BACnet WiFi Adapter talks BACnet IP via WiFi and includes a router to BACnet MS/TP. It can be used for commissioning and debugging BACnet systems.
Battery box or mounting enclosure which has Size 500 x 500 x 185mm (H x W x D).
Extended Bezels are double extended bezel with semi-flush mount bezel for double extended height back box
Semi Flush Mounting Bezel for ID51, ID61, ID2000 and ID3000 standard back box.
CAB-C1 Extended Back Box Kit includes a single “extended height” back box powder coated in RAL 7021 extra fine texture. Will hold batteries up to 17Ah. Suitable for use with single extension. Compatible with internal PSU3A or external PSU7A.
Communication Modules are use in the ZX series intelligent multi-protocol fire alarm control panels & These optional modules add optically isolated communication ports to the ZX series control panels
Compact 24hr inner door assembly
DX Spare Keys are used for DX series Keyswitch kits and are available in a pack of 5.
The Morley-IAS DXC Flush Bezel Kit used for Morley-IAS DXC2 or DXC4 panel and the kit includes additional extension back box. Extension box is used to accommodate larger batteries, relays or other equipment.
DXC replacement door is available for DXc control panels. This replacement door is fits with all three variants of the panel, DXc1, DXc2 & DXc4 and is supplied complete with display PCB, fascia label, ribbon cable and lock.
The DXc Blank Covers are a part of cover kits for DXc series control panels.
DXc custom key plate cover kit accessories are used to replace the blank cover supplied with the DXc2/4 control panels or used with the extension back box.
The DXc Extension Box Increases the enclosure size of a DXc1, Dxc2, or Dxc4 control panel to accommodate larger batteries, relays or other equipment by fitting the extension back box.
Deep Extension Back Box Kit includes deep back book with extra depth for additional battery space. The box has an extra fine texture RAL 7021 finish.
Door Holder Floor Plate is use for fixing door holder at right angle to floor.
Door Plate Assembly (Spare) is Door Keeper Plate in two pieces.
Extended Back-Box Kits are double extended back box kit with double “extended height” back box powder coated in RAL 7021 extra fine texture. Includes power in connectors. Will hold batteries up to 17Ah.
Extended Deep Back-Box Kits are double “extended height” back box with extra depth for additional battery space, powder coated in RAL 7021 extra fine texture
Morley - IAS' Extension Back Box Bezels are flush mounting bezels that fits a DXc1 panel with additional extension back box.
Extension Cover Blanking Plate Kit for extension cover moulding where no extension chassis is required. May be used for customisation such as mounting of plant switches. Finished in extra fine texture.
Commissioning Lead For Vigilon Panel
Flush Bezel Kits by Honeywell are covers can be purchased to suit your needs and include a blank cover, Customer key plate and 80 Zone LED expansion cover.
Flush Bezel kit for DXC1
Flush Fixing Kits are flush mounting plate for gent xenex conventional fire detection panels
Sampling Hole Clips are designed to alleviate such potential issues, by providing a clear, visual indication of sampling point location and its associated hole size.
The 797-062 is a Semi flush mounting kit for ZX5(S)e control panel.
Housing kit for IQ8FCT XS For surface mounting of up to 6 transponders IQ8FCT XS (Part No. 808606), consisting of housing back and cover.
ID3000 Extension Chassis Kits are 64 zone led extension chassis kit with Led display board for zone 1 to 65 to indicate fire and fault, disablement, test and also accept integral printer
Semi Flush Mounting Bezel for ID62 available in grey and black colour.
Flush Mounting Bezel for IDR repeaters.
SenTRI EN54 loop controlled repeat panel - Inner Door Assembly
Intelligent System Spare Parts are text insert label kit for intelligent addressable fire alarm panels
Kit Zx1/2Se Back Box Only
Kit Zx5Se Back Box Only
M200 Addressable Modules Mounting Boxes has unique mechanical design which allows each module to be mounted in either a wall box, on a DIN rail or within any type of enclosure.
3U Rack Blank Cover comes with mains/gland termination.
Multi-Mount Enclosure. Metal, NOTIFIER Black/Grey.
Mounting kit for ALR microphone Part No. 581316.
020-835 is a Spare key switch and keys for Morley-IAS repeaters.
Morley-IAS Extension Box & Covers By Honeywell is a DXc extension back box
The Key and cylinder kits are for DX CONNEXION control panels that allows the user to access level 2 function keys without using a password.
Multi-mount metal enclosures are capable for housingmmX-10ME, CMX-10RME or MCX-55 modules.
Display Assemble Kit for NF2000 includes a display plate (2× 40 LCD).
Display Kit for NF300. It Includes display plate with 240 × 60 pixel LCD and assembly kit.
NF3000 Extended & Deep Rear Case from Notifier comes with an extra fine texture, deep RAL 7021 housing with an extension for additional batteries. Can be used with the simple extension. Compatible with internal and external PSU power supplies.
ID61 & ID62 Replacement PCB Assembly Kit includes Lcd and Membrane.
Rack mount kit fits a DXc2 panel or DXc4 panel.
The Floor mounted only back box with extra depth for additional battery space. Powder coated in RAL 7021 extra fine texture. Includes power in connectors. Will hold batteries up to 78Ah. Compatible with PSU7A (020-579).
Replacement Inner Door for VIGPLUS-24 and VIGPLUS-72 (supplied in Black)
Replacement Kit Membrane Switch Main ID3000
S-Quad Duct Mounting Brackets are designed for the S-Quad Duct Smoke Sensor. They are available to mount the detector on circular and insulated ducts.
SMB500 surface-mount boxes are for use with System Sensor® modules when flush or recessed mounting is not possible.
Semi Flush Mounting Bezel for ID50 & ID60 available in grey and black colour.
Standard Back Box Kit includes a basic back box powder coated in RAL 7021 extra fine texture and power in connectors. Will hold batteries up to 12Ah. Compatible with internal PSU3A or external PSU7A.
Extension Cover Kit includes moulding, hinges for user interface door, push clip fasteners and printer slot covering label.
Standard Extension Back Box Kit includes a basic back box powder coated in RAL 7021 extra fine texture. Will hold batteries up to 17Ah.
TP970/9600 Series pneumatic thermostat accessories include backplate assemblies, filter assemblies and cartridges, plugs, resistor blocks, wall plates, mounting hardware, thermostat cover kits, satin/chrome cover assemblies, and more.
19in rack enclosures are designed to house up to 20 display and programmer modules in a wide variety of configurations to suit the particular requirements of a site where centralised control and monitoring of the VESDA system is required
Wiring box enclosures are for use with CP-UL1012S, CP-UL4024S, CP-VL0000AS, CP-VL4022AS, CP-VL4024NS, PUL1012S, PUL4024S, PVL0000AS, PVL4022AS, and PVL4024NS unitary controllers.
XS814 auxiliary terminal blocks are for use with EXCEL® 5000 systems. They mount onto already installed pluggable I/O modules in order to equip them with additional terminals.
XSU screw-type terminal sockets are for use with Excel 800 systems.
ZX Range Spare parts are used in ZX series control panels
The ZX range of 1, 2 or 5 loop modular, scalable intelligent fire alarm control panels are suitable for protecting all types of medium to large properties.
Battery box or Mounting enclosure for ZX1/2Se control panel by Morley IAs
Back Box for ZX10SE available in metal work only
The Morley IAS by Honeywell presents ZX5SE series semi-flush mounting bezel kits which forms a part of ZX5SE fire alarm control panel. They are used for the Morley IAS active & passive repeater panel range.
ZX5SE Door is a spare part for intelligent fire alarm control panel.
ZXSe Mounting Brackets are 'L’ shaped to fit peripheral pcb’s into Zxe/ZX5e/ZXSe
Start your search with category name, product name, part number, etc.