Backboxes are designed for use with Silent Knight® remote annunciators.

SD500 backplates trim rough openings for the SD500-PS and SD500-PSDA addressable pull stations.

The Mounting Base is required to meet local code and application requirements and for that System Sensor offers standard 4in and 6in bases.

L-Series SPCW8 dual-voltage speakers provides a solution for ceiling mount applications that are used for tap settings that range between 1/8 to 8W. These speakers provide a solution for almost any voice or audio requirement.

B210LP mounting bases are six-inch, flanged bases for use with 200 Series detectors.

Annunciator Bezels are red and for use with Silent Knight® 5860R remote annunciators.

Operator keys are for use with Silent Knight® 5208 fire alarm control panels (FACPs).

Control Panel Cabinet Keys are for use with Silent Knight® 5000 entry system control panels. These keys are made of metal.

SK-2190 accessory cabinets are for use with Silent Knight® SK-5217 zone expanders.

The Alerton ESD-100 is an Ethernet data line protector, which protects equipment connected to unshielded twisted pair (UTP) Ethernet networks from transient voltage.

FCPS24 battery cables are available in lengths of 10 inches.

4-Pin Quick Connect Cables are an easy option for temporarily connecting to the 5230 remote annunciator for programming.

The HAZWP Model Fire Alarm Pull Station is specifically designed for harsh industrial environments where weatherproofing and corrosion are issues.

The PS-SA pull station is a non-coded, single-action manual pull station with pigtail connections and a key-lock reset feature.

The SKE-Series Voice Evacuation System provides maximum flexibility to accommodate your voice evacuation requirements

L-Series low frequency sounders include a variety of features that increase their application versatility while simplifying installation.

00VIP-TR panel trim rings are used for flush mounting the EVS-LOC local operator console.

SK-NIC-KI accessory install kits are for use with Silent Knight® SK-NIC network interface cards.

Backbox weatherproof gaskets are replacement gaskets for use with PSWPB backboxes.

SK-FFT firefighter telephone communication system with keypad provides indications of phone activation and corresponding trouble conditions.

IntelliKnight® IP communicators for monitoring of Silent Knight® fire alarm panels.

SpectrAlert® Advance retrofit plates are a 9.5x7 inch retrofit plate that cover the footprint of the legacy SpectrAlert® wall-mount speaker strobe. These retrofit plates are compatible with the horn strobe and speaker strobe lines.

MP120KL mounting plates are designed to use 120V AC to power L-Series horns, strobes, horn strobes, chimes, and chime strobes.

5820 FIREFIGHTERS KEY (5 KEYS/KIT)

PS-WPB weatherproof boxes are for use with Silent Knight® die-cast metal manual pull stations.

SK-HEAT addressable heat and rate-of-rise detectors are plug-in thermal detectors with integral communication features that surpass conventional detectors.

411 Series digital alarm communicator transmitter (DACT) phone cords are 7 feet in length.

The FFT-STSS and FFT-STSR are compatible with the Fire Fighters Telephone communication system. The FFT-STSS is a surface mount door with keylock. The FFT-STSR is a`recessed mount door with keylock

SKE-Series microphones work with SKE-Series voice evacuation systems.

The 7720P programmer or the Web-Based Program is used to enter all central-station information. This is saved to the IPGSM-COM communicator panel memory.

SK-RZA4 remote LED annunciators support Silent Knight® SK-4 fire alarm control panels (FACPs).

Intelligent 10-input monitor modules are designed for use with Honeywell Silent Knight® Series fire alarm control panels. Each monitor module is intended to interface between a control panel and a normally open contact device.

Addressable 6-relay control modules are designed for use with Honeywell Silent Knight® Series fire alarm control panels (FACPs). They come equipped with six Form C relays and allow the FACP to switch discrete contacts through a code command.

Addressable zone interface modules are intelligent 2-wire interface modules designed for use with the Honeywell Silent Knight® Series fire alarm control panels (FACPs).

Intelligent monitor modules are addressable and designed for use with Silent Knight® Series FACPs. They are intended to function with 2-wire systems, where the individual address of each module is selected using the built-in rotary switches.

SK-Control-6 six circuit supervised control module provides supervised monitoring of wiring to load devices that require an external power supply or amplifier to operate.

058950XL PC boards are for use with Silent Knight® 5895XL intelligent power modules.

SK-F485C fiber to SBus converters offer a seamless conversion from panel SBus connection to fiber and back again.

SpectrAlert Advance Decals are for use on our non-pad printed wall- and ceiling-mount devices.

L-Series low frequency compact wall sounders include a variety of features that increase their application versatility while simplifying installation.

InnovairFlex™ duct smoke detectors combine an impressive collection of innovations designed to save you time and money and provide the flexibility you need in the field.

The SD505-HEAT is an addressable fixed temperature heat sensor that uses a thermistor sensing circuit to produce an alarm when the temperature goes above the trip point programmed at the panel

L-Series with LED Outdoor Weatherproof horn strobes are rich with features guaranteed to cut installation costs and times with its lower current draw and modern aesthetics.

L-Series with LED Speaker Strobes are rich with features guaranteed to cut installation costs and times with its lower current draw and modern aesthetics.

Honeywell's SpectrAlert® Advance SP series speakers are dual voltage speakers designed for fire protective signaling systems.

System Sensor L-Series speakers reduce costly ground faults using a plug-in design and universal mounting plate that allow the installer to pre-wire mounting plates, dress the wires, and confirm wiring continuity before plugging in the speakers.

L-Series Outdoor Weatherproof Horns are rich with features guaranteed to cut installation costs and times with its lower current draw and modern aesthetics.

L-Series compact horns are designed to simplify installations to provide primary and secondary signaling for fire and security applications.

SpectrAlert Advance Outdoor Back Boxes ensure a NEMA 4X weatherproof listing for AV devices.

Alarms, audible and visual alarms, water flow indicators and others

System Sensor L-Series speakers reduce costly ground faults using a plug-in design and universal mounting plate that allow the installer to pre-wire mounting plates, dress the wires, and confirm wiring continuity before plugging in the speakers.

The OSI-RI is an intelligent addressable reflector-type linear optical beam smoke detector that is uniquely suited for protecting large open areas with high ceilings, where spot-type smoke detectors are difficult to install and maintain.

L-Series low frequency sounders include a variety of features that increase their application versatility while simplifying installation.

System Sensor L-Series low frequency sounder strobes are rich with features guaranteed to maximize profits with lower current draw and modern aesthetics.

SD505 smoke detector bases are designed for use with IntelliKnight® photoelectric smoke detectors.

MP120K mounting plates are designed to use 120V AC to power SpectrAlert® Advance horns, strobes, horn strobes, chimes, and chime strobes.

System Sensor L-Series low frequency sounder strobes are rich with features guaranteed to maximize profits with lower current draw and modern aesthetics.

The System Sensor A77-AB adapter rings allow installers to retrofit i³™ Series detectors where a larger diameter smoke detector was previously installed.

Installation/removal tools are designed for use with System Sensor® plug-in smoke detectors. They permit installation and removal of detectors in elevated mounting locations.

Battery Connectors are for use with power supplies.

The SK-4 and SK-4E (SK-2/E) are four zone conventional fire alarm control panels (FACPs) that bring the latest in microprocessor technology to conventional fire controls.

CO1224T carbon monoxide (CO) detectors with Real Test® use a highly accurate and reliable electrochemical sensing cell to provide an early warning of dangerous CO levels.

115035 replacement transformers are used with Silent Knight® 5104B fire communicators.

Fire Alarm Control Panel Replacement Transformers are used with Silent Knight® 5700 fire alarm control panels.

SK-NIC network interface cards work with fire alarm control panels (FACPs), allowing FACPs to connect to one another through broadband networks.

SK-PULL intelligent pull stations are for use with Silent Knight® Series fire control panels (FACPs).

The PS-DA pull station is a non-coded, dual-action manual pull station with a key-lock reset feature.

Four zone conventional fire alarm control dress panels are an add-on for SK-4 and SK-4E fire alarm control panels (FACPs).

The Honeywell 7626-25HC is an AlarmNet 25’ RF antenna coax cable which allows you to mount your AlarmNet GSM-ANT3DB external weatherproof antenna up to 25’ from your cellular or dual path AlarmNet alarm monitoring communicator.

Heating kits for use to prevent condensation with the BEAM1224 conventional beam smoke detectors. They lessen the likelihood of condensation by maintaining the unit at a temperature that is slightly higher than the surrounding air.

FFT-24 expander boards allow an additional 24 zones to Silent Knight® fire fighters telephone control systems.

Red and black battery cables are available in lengths of 12 inches.

Red Battery Jumper Cable

The SK-4 and SK-4E (SK-4/E) are four zone conventional fire alarm control panels(FACPs) that bring the latest in microprocessor technology to conventional fire controls.

PS-GR12 scored acrylic break rods are for use with Silent Knight® die-cast metal manual pull stations. They are sold in a box of 12.

PS-BB backboxes are for use with Silent Knight® die-cast metal manual pull stations.

Multi-mode and single-mode fiber-optic modules are plug-in fiber loop modules that work as a single channel to transmit or receive communications with Silent Knight® network interface cards.

Two relay output dual monitor modules are intended for use with intelligent, 2-wire systems, where the individual address of each module is selected using the built-in rotary decade switches.

Addressable 6-zone interface modules transmit the status of 2-wire detector zones to Silent Knight® fire alarm control panels (FACPs). Status conditions are reported as normal, open, or alarm.

Intelligent fault isolator modules are addressable and designed for use with the Honeywell Silent Knight® fire alarm control panels. They act as an automatic switch that opens when the line voltage on the signaling line circuit loop drops below 4V.

Intelligent miniature monitor modules are addressable monitor modules intended for use with the Honeywell Silent Knight® fire alarm control panels. They act as an interface to contact devices, such as water flow switches and pull stations.

Addressable dual monitor modules come equipped with two initiating circuits that are designed to be used with the Honeywell Silent Knight® Series fire alarm control panels (FACPs).

SK-Control addressable notification modules provide supervised monitoring of wiring to the load devices that require an external power supply to operate such as bells, horns, and strobes.

Backboxes are for use with fire alarm control panels (FACPs) and are used to mount up to two batteries and power supplies.

F210 flanged rings are designed for use with B210LP detector bases.

The System Sensor DH400OE-1 is a steel enclosure for mounting a standard indoor rated duct smoke detector outdoors.

SKE zone splitters are capable of splitting the audio output from the main amplifier into separate audio output zones or channels.

The Trim Rings are for use with 2351B intelligent detectors and are compatible with B300-6, B300-6-IV, and B210LP 6-inch standard bases.

The HW-TG7L Fire Series combines Telguard’s model TG-7FS with the powerful capabilities of Honeywell’s Connected Life Safety Services (CLSS) Cloud.

SKE-Series voice evacuation systems have a built-in digital message repeater, power supply, and a supervised microphone. The systems are activated when one of the two alarm inputs are tripped.

SKE-V70 speaker circuit voltage converters change the speaker circuit voltage from 25 Vrms to 70.7 Vrms.

Remote annunciators are designed for both conventional and intelligent applications. Their red LED provides visual indication of an alarm condition.

Intellknight Address Head Removal Kit for an SD505 addressable photoelectric smoke detector.

PS-SMBB surface-mount boxes are for use with SD500 pull stations.

L-Series with LED Speaker Strobes are rich with features guaranteed to cut installation costs and times with its lower current draw and modern aesthetics.

L-Series with LED Outdoor Weatherproof strobes are rich with features guaranteed to cut installation costs and times with its lower current draw and modern aesthetics.

5600 Series mechanical heat detectors offer property protection against fire and are intended for non-life-safety installations where smoke detectors are inappropriate.

The SK-PTIR-W is an intelligent, multi-criteria detector that combines photoelectric, thermal, and infrared (PTIR) sensors in one unit to sense multiple components of a fire.

Multi-criteria fire and CO detectors are plug-in, addressable devices that provide both fire and carbon monoxide (CO) detection.

The Silent Knight® SK-PHOTO Series features a modern design and expanded color options support a variety of contemporary aesthetic demands. In addition, each detector is constructed for exceptional installation and maintenance efficiency.

The B200SR sounder and LF sounder bases are fully compatible with existing B501BH Series sounder base installations. The device enables users to select one of two B501-supported tones (ANSI Temporal 3 or Continuous) through a jumper.

L-Series horns are designed to simplify installations to provide primary and secondary signaling for fire and security applications.

The DST family of sampling tubes are pieces of steel piping with a series of holes drilled the entire length of the tube and should extend the entire width of the duct.

i³™ Series offers conventional, photoelectric and photo/thermal smoke detectors in both 2-wire and 4-wire formats.

L-Series 4-Wire horn strobes are intended for full building notification as well as on the property ground.

Honeywell's SpectrAlert® Advance SP series speakers are dual voltage speakers designed for fire protective signaling systems.

CO detector replacement plate to cover the footprint of previously installed detectors.

L-Series Surface Mount Back Boxes are the best solution in locations where you have a hard surface to mount to.

L-Series LED 2-wire horn strobes are rich with features that increase application versatility, simplify installation, and maximize profits with lower current draw and modern aesthetics.

L-Series LED 2-wire horn strobes are rich with features that increase application versatility, simplify installation, and maximize profits with lower current draw and modern aesthetics.

DCOIL remote test coils are required for older DNR(W) duct detector housings.

SD500-ANM addressable notification modules provide supervised monitoring of wiring to the load devices that require an external power supply to operate such as bells, horns, and strobes.

L-Series 4-Wire horn strobes are intended for full building notification as well as on the property ground.

P48-21-00 end caps for metal sampling tubes are intended for use with conventional and intelligent duct smoke detectors.

STS air sampling tubes are intended for use with duct detection devices.

SpectrAlert® outdoor selectable output speaker strobes provide a broad frequency response range, low harmonic distortion, and maintain a high sound pressure level at all tap settings to provide accurate broadcast of evacuation messages.

SpectrAlert® Advance Series horns are designed to simplify installations to provide primary and secondary signaling for fire and security applications.

FP-WHITE faceplates are designed for use with Silent Knight® addressable modules. They better compliment the design aesthetics of a modern building and also match white System Sensor® L-Series AV devices.

SD505-IB Six Inch Isolator Base

L-Series selectable output chimes are private mode notification appliances used to alert trained personnel to investigate possible emergency situations.

Multi-voltage conventional relays are used for high-current switching applications such as fans and damper assembly controls, door controls, air handling unit controls, and other types of system interfacing.

L-Series with LED Outdoor Weatherproof strobes are rich with features guaranteed to cut installation costs and times with its lower current draw and modern aesthetics.

SpectrAlert® Advance Series mini-horns are designed to simplify installations to provide primary and secondary signaling for fire and security applications.

B224RB Detector Relay Bases are designed for use with 200 Series detectors, and provide a single Form C contact relay for the control of auxiliary functions, such as door closures and elevator recall.

B224BI Plug-in Isolator Detector Bases prevent an entire communications loop from being disabled when a short circuit occurs.

The SENS-RDR utilizes infrared technology to read the sensitivity of i3 and 100 Series conventional detectors.

DUCTCOV covers are designed for use with DNR and DNRW duct smoke detectors.

Addressable manual pull stations are a single action or dual action addressable manual fire alarm pull stations for use with IntelliKnight® fire control panels.

SD505 Duct Smoke Detector Remote Test Switch

SSM Series alarm bells are low-current, high-decibel notification appliances for use in fire and burglary systems or other signaling applications.

Sampling tubes intended for use with SD505 duct smoke detectors.

WTP weatherproof plates enable installers to flush-mount outdoor horns, strobes, horn strobes, speakers, and speaker strobes to a variety of wall surfaces, including brick, ceramic tile, concrete, and masonry brick.

SD505-6SB sounder bases are six inches and add an audible output function to the IntelliKnight® SD505-APS, SD505-AIS, or SD505-AHS addressable detectors.

SD500-SDM addressable 2-wire smoke detector modules allow IntelliKnight® fire alarm controls to interface and monitor 2-wire conventional smoke detectors.

SD500-LIM line isolator modules can isolate a short circuit wiring fault on a signaling line circuit (SLC) loop.

ISO-6 six fault isolator modules provide six equivalent circuits that will allow a portion of the communications loop to continue operating when a short circuit occurs on that loop.

EVS-LOC local operator consoles are a powerful addition to any emergency voice system for mass notification purposes.

7628 end-of-line resistors are 4.7K ohm resistors that must be used with polarized devices for proper operation.

SK-SCK seismic compliance kits are for use with Silent Knight® fire alarm control panels (FACPs).

RBB surface-mount accessory cabinets can be used if the main control panel backup batteries are too large to fit into the main control panel cabinet.

TR-1 trim ring assemblies are for use with Gamewell-FCI® Flex 4-zone fire alarm control panels (FACPs). They allow semi-flush mounting of the cabinet. Red and black options are available.

Single Terminal Back Boxes are used for mounting RTS151 key. Remote annunciator accessories providing reset function and has a Red LED to indicate alarm conditions.

The Notifier’s IPCHSKIT is a IP Communicator Chassis Mounting Kit. For mounting an IPDACT-2/2UD onto the panel chassis or CHS-4 series chassis. Use IPENC for external mounting applications.

6860 remote annunciators are used to view system status indicators for Honeywell Silent Knight® fire alarm control panels (FACPs).

EVS-RCU supervised remote command units are a combination supervised remote microphone and annunciator that is compatible with the EVS-Series Emergency Voice System.

6820EVS cabinets are for use with Silent Knight® 6820EVS fire alarm control panels (FACPs).

Surface backboxes are for use with Fire-Lite® BG-12LR agent release stations.

Serial and parallel gateway modules allow you to connect virtually any standard PC-compatible printer to a Silent Knight® Series fire alarm control panel (FACP) and to generate reports on site.

5820XL LED I/O driver modules provide an effective means to customize your remote annunciation. They provide LED annunciation and control inputs for the fire alarm control panel (FACP).

CB500 wiring barriers are used to separate power-limited and nonpower-limited wiring inside of junction boxes.

PAM multi-voltage relay modules are ideal for applications where remote relays are required for control or status feedback.

Digital alarm communicator transmitter (DACT) phone cords are for use with the fire alarm control panels (FACPs) with built-in DACT.

SD500-LK dual action conversion kits are used to convert the SD500-PS (single action pull station) to a SD500-PSDA (dual action pull station).

F110 flanges are replacements for the flanges on B400 Series detectors.

The trim rings are designed for semi-flush mounting applications, and intended for use with BG-12 Series fire alarm pull stations.

5895XL intelligent power modules are 6A notification power expanders that provide their own AC power connection, battery charging circuit, and backup battery for use with Silent Knight® addressable fire alarm control panels.

The printer is used with the Gamewell-FCI fire alarm control panels (FACPs) and provides printer capability to produce a written record of system events and status changes.

Remote mounting kits are for use with Silent Knight® 5815XL signaling line circuit (SLC) expanders.

00PLEX-2 dead front panels are used in jurisdictions that require single button operation of the reset and silence functions on the fire alarm control panel (FACP).

Surface-mount trim rings are for use with Silent Knight® remote annunciators.

SB-10 surface backboxes are for use with Fire-Lite® BG-12LR agent release stations.

Ivory faceplates are sold in packs of ten. All faceplates are unmarked (without logos).

005860T surface-mount trim rings are for use with Silent Knight® 5860 remote annunciators. Red and gray options are available.

IDP-ACB module cabinets are for use with Silent Knight® IDP-Zone-6 interface modules. They have a built-in chassis that will accommodate one or two modules.

The 4XLM LED Interface Module supports the RZA-4X remote annunciator module.

KILLARK® XAL-53 explosion-proof pull stations are suitable for use in hazardous areas due to the presence of flammable gases or vapors, combustible dust, or easily ignitable fibers.

005883 relay interface boards provide 10 general purpose Form C relays that can be used to control any device that requires a dry contact closure.

FFT-FPJ firefighter phone jacks provide a quick connect to the SK-FFT fire fighter telephone system using an FFT-RHS remote handset.

6855 remote annunciators are used to operate and program Honeywell Silent Knight® fire alarm control panels (FACPs) from anywhere within the system.

5860 remote annunciators can be used to operate and program Honeywell Silent Knight® fire alarm control panels (FACPs) from anywhere within the system.

Expand the versatility of the InnovairFlex™ line of duct smoke detectors with System Sensor notification and test accessories.

DH24120 electromagnetic fire door holders are available in various mounting styles and finishes.

SB-I/O surface-mount backboxes are for use with Silent Knight® PS-SA and PS-DA pull stations.

302 Series rate-anticipation heat detectors operate within a controlled range of two to three degrees of their setpoints, regardless of the rate of temperature rise. These detectors are available in either 135 °F (57.2 °C) or 194 °F (90 °C) ratings.

EVS-CE4 4-Circuit audio expanders mount inside the cabinet. Standby current is 20 mA and alarm current is 180 mA.

BAT Series batteries are Power-Sonic brand batteries. BAT series (or Power-Sonic brand) batteries are recommended for secondary power or backup power for all NOTIFIER® fire alarm control equipment.

i³™ Series offers conventional smoke detectors with sounder, relay and isolator features included.

L-Series LED strobes are rich with features that increase application versatility, simplify installation, and maximize profits with lower current draw and modern aesthetics.

L-Series with LED chime strobes are private mode notification appliances used to alert trained personnel to investigate possible emergency situations and to take appropriate action.

L-Series LED strobes are rich with features that increase application versatility, simplify installation, and maximize profits with lower current draw and modern aesthetics.

L-Series with LED chime strobes are private mode notification appliances used to alert trained personnel to investigate possible emergency situations and to take appropriate action.

FM-Series electromagnetic door holder spacers are used, when necessary, for the installation of remote door release systems.

HPTCOVER transformer enclosures are used in applications where the installation requires a plug-in transformer to be securely affixed to an AC wall outlet.

5820XL-EVS replacement microphones provide additional communications and control options.

EVS intelligent internal amplifiers are for use with the 5820XL-EVS. They are used to amplify audio messages for distribution throughout a facility.

FFT-HSC Firefighter handset cabinets can hold up to 10 remote handsets.

EVS-Series voice control modules are contained within the EVS-Series panel enclosure. They provide a supervised microphone for live communication and an interface for the emergency voice system.

The EVS Series intelligent amplifiers are used with Version 14.0 or newer 6820EVS to amplify audio messages for distribution throughout a facility.

The BB-STD is a accessory of a System Sensor.

Sync-Circuit Modules synchronize SpectrAlert Advance strobes, horns, and chimes over a single pair of wires.

L-Series trim rings provide additional space within the backbox. The design is universal across the L-series notification appliance line and supports indoor horns, horn strobes, chimes, chime strobes, strobes, speakers, and speaker strobes.

System Sensor Select Series detector color kits offer expanded color options to meet varying aesthetic applications.

SB-SPC8 tile support brackets are designed for use with L-Series SPCW8 8-inch dual-voltage speakers. These brackets offer support for ceiling tile installations.

L-Series universal expander plates cut costs and speed installation on emergency communications applications that require fire and emergency warnings by combining the functions of multiple devices on a single mounting plate and backbox.

L-Series LED color lenses come in four colors options: amber, blue, green, and red. The lenses are compatible with L-Series strobes including wall- or ceiling-mount.

Detector test magnets simplify detector testing and maintenance

Addressable photoelectric smoke detectors are the clear choice for commercial settings where smoldering fires are a threat.

AP-P adapter plates are decorative plastic adapters for mounting 302 Series detectors to four-inch outlet boxes.

SMB600 flanged surface mounting kits may be used with certain System Sensor® smoke detectors when flush or recessed mounting are not possible.

SD500-ARM addressable relay modules add two Form C contacts to the Farenhyt„¢ addressable system.

SD505-NSRT-RH disassembly tools are designed for Hochiki address sensors.

SD500 addressable miniature input modules act as an interface to dry contact devices, such as water flow switches and conventional pull stations. Due to their small size, the modules can be mounted in a single-gang junction box.

Flush Mount Trim Rings are for use with Silent Knight® IntelliKnight® 5600 fire alarm control panels (FACPs).