Central Processing Unit series are used for NFS2-640 Intelligent Fire Alarm Control Panel. Central Processing Unit is provided with integral 1.5A power supply.
The Backlit LCD annunciator for the Notifier fire alarm control panels, or network control annunciators that support the 80-character display format. LCD annunciator may be connected onto the four-wire EIA-485 terminal port.
The ACS-Series Annunciator and Control System provides arrays of LEDs to indicate point status, zone status, system status, and ability to perform system reset, silence, acknowledge and drill.
NCA/640-2-KIT is a Bracket installation kit required to mount NCA-2 to the CPU2-640/-640E’s standard chassis.The NCA-2 can be used as a primary display for the NFS2-640 by using NCA/640-2-KIT for directly connecting their network ports
Graphic Annunciator Dress Plates are used when the 10" graphic display is mounted in the top row/except top row of a CAB-4 Series cabinet.
LDM-Cables are ribbon cable sets which provide connection between LDM-32/LDM-E32 and LEDs or lamps on a custom graphic panel.
The LEM-320 Loop Expander Module provide by Notifierâ€™s ONYX Series of Fire Alarm Control Panels with Signaling Line Circuits. LEM-320 comes with simple installation plug in style.
The LDM Series lamp driver modules with a custom graphic display, provides annunciation and control for Fire Lite’s intelligent fire alarm control panels
The Lamp Driver Module with a custom graphic array used to indicate point status and, in some versions, to control the state of output points
The lamp driver relay modules are used to provide 32 dry-contact relays for electrical isolation when connecting the system to other equipment.
LCD-160 is a 640-character Liquid Crystal Display (LCD) annunciator and remote control for the NOTIFIER NFS-3030/NFS2-3030
The 24inch long cable used to connect SCS-8L/SCE-8L outputs to lamps or LEDs.
Notifier Retrofit Mounting Kit is used for mounting the NCA-2 Network Control Annunciator to a DPDISP dress plate.
Network Control Display requires a network communications module for networking. In direct connect applications, the NCM is not required.
Central Processing Unit CPU2-640 series are used for NFS2-640 Intelligent Fire Alarm Control Panel. Central Processing Unit is provided with integral 3.0 A power supply.
The LCM-320 Loop Control Modules and the LEM-320 Loop Expander Module provide NOTIFIERâ€™s ONYX Series of Fire Alarm Control Panels (FACPs) with Signaling Line Circuits (SLCs)
ONYX FirstVision™ backbox enclosure and door is used for perfect and secure mounting of ONYX FirstVision™ Interactive Firefighters’ Display system.
ONYX FirstVision™ Interactive Firefighters’ Display graphically displays critical information on the origin and spread of a fire, allowing firefighters to quickly locate and extinguish it.
Backbox by Notifier has been engineered to provide ease-of entry for the installer.
SCS-8 Smoke Control Station by Honeywell are used with the Notifier NFS2-3030 panel or the NCA-2 network annunciator for Firefighter's Smoke Control Station (FSCS) applications.
The SCS-8 Smoke Control Station, SCS-8L Smoke Control Lamp Driver are used with the NOTIFIER AM2020/AFP1010, NFS-640, NFS-3030, NFS2- 3030 Fire Alarm Control Panels
Start your search with category name, product name, part number, etc.
Copyright © 2022 Honeywell International Inc.