Mains Switching interface units offers heavy duty relay switching for both 24V and 230V applications with contacts rated at 13A suitable for switching damper control units and other building controls requiring high contact rating for mains shutdown.
A083 Galaxy Ethernet Modules provides alarm signaling and remote servicing support for Galaxy systems via 10 Base T Ethernet LAN/WAN supporting TCP/IP protocol.
ADPRO VM22E 4-channel audio switchers allow users to switch the audio output from an ADPRO device to one of four selectable audio outputs on the VM22E audio switchers.
Cable connection terminal for essernet modules
The Communication Module card with an RS-232 communication port for control systems and technical management or graphics programs of the NFS-SUPRA and RP1R-SUPRA control panels via serial port. It is installed inside the central.
Connection terminal for UBext
Contact Interface Module CIM
Copper Network Cards are used to allow data to pass between control panels in a Vigilon Compact networked fire system.
D1 PAMMI Plus Redundant Selector Switch
DXc Network card are fitted to each panel in order to create a network and to connect panels together.
The Morley IAS Fire System by Honeywell product 795-122 is a RS232 communication card kit designed for use with the Morley DXc range of analogue addressable fire alarm control panel.
DXc 2 loop base card - Morley Protocol
8 Channel distributor unit with USB-R485
Farenhyt IDP-Zone-6 is an addressable zone interface module for use with Silent Knight IFP-series fire alarm control panels (FACPs).
Honeywell's farenhyt two wire interface modules have been designed for use with Silent Knight IFP-series fire alarm control panels (FACPs).
Single Mode Fibre Card by Honeywell allows a fast and more reliable network over distances of up to 20km between Vigilon Plus Panels.
Field Bus Interface Plus is used for interfacing for the programming of the FACP 8007, 8000 C/M, 8008, gateway, ABIGA and Extinguishing Control Panels 8010 or for the direct field-side connection of a single installed loop.
These S4 Single Output Interfaces are designed for use with any Vigilon/34000 fire alarm control panel. Each module includes loop isolators for device isolation.
Network interface modules for up to 16 resp. 31 network nodes for FlexES Control.
Galaxy Dimension IP Modules are provides alarm signalling and remote servicing support for Galaxy systems via 10 Base T Ethernet LAN/WAN supporting TCP/IP protocol.
A073-00-01 modules are direct mounted RF portal on PCB
Printer Interfaces from galaxy has 26 pin and sub D connector.
Honeywell Security Galaxy Flex GSM/GPRS Module for Galaxy Flex provides additional communication options for reliable alarm signalling with an alarm receiving centre. It also allows Galaxy™s Remote Servicing Suite (RSS) to access the panel remotely.
IP modules are equipment for redirecting the RS232/422/TCP/UDP serial port of the control panel to the TG graphic management software using IP protocol.
The High Speed NOTI-FIRE-NET™ intelligent life safety network links multiple NOTIFIER intelligent fire alarm control panels together as one for cooperative control and network-wide monitoring.
Low Voltage Input /Output Vigilon Interface Module used to control a resistive load of up to 1A at 30Vdc/ac via a set of single pole change over contacts. Also allow the monitoring of the external equipment.
Loop Isolator Module LIM
Vigilon NPORT 100 - RS232 to IP device (single unit 2 required per link)
Network Communication Module is Multi-Mode Fiber/Wire. Used in applications where the fire network adapter is mounted remotely next to an EBI server.
Replacement Card for Mains Powered Interface (34440)
Replacement Interface Board on a carrier into a legacy 34440 Mains powered interface unit.
S4 Input Interface modules are used to link the fire alarm system to other plant management devices such as sprinklers and security systems. They can also be used to link to a zone of conventional detectors.
S4 Interface Modules 4-Input / Output Interface Module are designed for use with Vigilon and 34000 fire alarm control panel
The S4 Single Output Interfaces are suitable for mains switching, they provide normally closed and normally open contacts rated at 13A 250Vac (nominal 230Vac) resistive load.
The S4-34418 from Gent is a Keyswitch Interface which comes with a blue enclosure.
SK-NIC network interface cards work with fire alarm control panels (FACPs), allowing FACPs to connect to one another through broadband networks.
W-SYNC SWIFT® wireless synchronization modules provide audio and visual synchronization between SWIFT® notification appliances and System Sensor® wired notification appliances, supporting the integrated wired/wireless solution.
The accessories are designed for Salto’s Sallis wireless lock family to expand online access control beyond traditionally wired openings.
The N-ANN-S/PG Interface module connects either a serial or parallel printer with a compatible Fire Alarm Control Panel (FACP) to print real-time logs of system events, detector status reports, and event histories.
Multi-mode and single-mode fiber-optic modules are plug-in fiber loop modules that work as a single channel to transmit or receive communications with Silent Knight® network interface cards.
TCP/IP converter, Ethernet RS232 / RS485
Universal Interface Module UIM
VESDA® VHX-0200 Sliding Windows high level interface (HLI) models enable connections between a VESDAnet™ (a communications protocol that allows devices to communicate on one network) and configuration/monitoring platforms.
VESDA Wall-Mounted Modbus High Level Interface (HLI) links your VESDAnet1 with PC software monitoring tools, Building Management Systems (BMSs) or Fire Alarm Control Panels (FACPs).
VESDA® Modbus type 3 HLIs act as a proxy for all VESDA devices on the VESDAnet™ network, providing access to rich status information available from VESDA detectors, as well as the ability to control and configure these devices.
VIG-NC-FO Network Card features up to 31 Control panels and Network Nodes can be connected in a secure loop
Gent by Honeywell introduces Vigilion's Loop Powered Interfaces and other devices which can accommodate a high quantity of loop powered interface units offering flexible range of inputs and outputs from the FD&A system.
Compact Plus Terminal Node is used for Vigilon panel network. It is supplied in black.
The Vigilon Fibre Optic Secure Domain Cards allow fast message passing to the network. These cards must be plugged into the backplane of the panel or node in a dedicated slot.
The Vigilon Netwrok Cards are network cards for Vigilon Addressable Fire Detection System that expands the Gent Vigilon Plus and Gent Vigilon fire alarm network
Z-System Zener Barrier for AV device (Drives one sounder or 2 strobes)
Internal Printer for use with ZX5Se intelligent fire alarm control panel.
The ZXSe range of analogue addressable fire alarm control panels have been designed and constructed around proven and reliable microprocessor technology.
Start your search with category name, product name, part number, etc.
Copyright © 2023 Honeywell International Inc.