Alerton/ACI Temperature sensors are designed for HVAC, Building Automation, and light industrial systems. Specific applications include: zone control, air handling units, and temperature monitoring.
C7772 wall plate temperature sensors are designed provide a resistive output signals proportional to sensed room or space temperature.
LF20 Duct Temperature Sensors are designed for duct mounting and useful for in ventilating and air conditioning systems to measure discharge, return, or outside air temperature.
Series Duct mounting humidity and temperature sensors are designed for environmental monitoring and control applications in industrial, commercial and general building.
The humidity and temperature sensors can be used for a wide range of HVAC applications.
The sensing element of these immersion temperature sensors should be used in environments where the normal operating temperature will be between -40 to 302°F (-40 to 150°C).
Immersion And Air-Duct Temperature Sensors are not polarized. Thus, connecting the wires in reverse will not result in any malfunction.
TS-21xx-GH-xx-AA or TS-21xx-PH-xx-AA immersion temperature sensors may be used to monitor any liquid or gas.
Immersion-Type Temperature sensors have an output signal of 3K Ohms at 77°F (25°C) or 10K Ohms (Type II) at 77°F (25°C).
The Remote Thermistor family of thermistors provide remote reporting of door switch status, temperature, and humidity. It is available in several different models.
LP914A and LP915A pneumatic sensors are proportional-type temperature sensors that are used with pneumatic controllers to manage pneumatic values and damper actuators. LP914A and LP915A pneumatic sensors can be duct-, well-, or wall-mounted sensors.
The Sensors are Double encapsulated to provide Additional protection against moisture and corrosion. Temperature Transmitter are calibrated with high quality equipment to optimize long term performance.
Outside Temperature Sensor by Honeywell contain a single sensor element, and are used to detect outside temperature in heating, ventilation, and air conditioning systems enabling weather-related temperature control.
PF20 Duct Temperature Sensors are used in ventilating and air conditioning systems to measure discharge, return, or outside air temperature. They are designed for duct mounting.
The ACI Thermistor Pipe Mount Series features a 1.1” long Brass probe with a small curvature on the bottom that is designed to increase the surface area and improve the thermal conductivity between the pipe and the sensor.
The INNCOM by Honeywell thermostat RT3 is a smart temperature sensor equipped with an RF transceiver designed to report temperature.
The RS-WMB Series Room Sensors and Displays are sensors like temperature, CO2 and Humidity sensors encompassed inside a standard electric back box which monitors the temperature, dew point and CO2 in a room.
The TS-x-RD Series rigid copper averaging temperature sensors are used to monitor and control the building temperature in ducts or plenums. They have high accuracy and come with high durability along with 2/5 year warranty.
Room Sensors are two-wire, 4 to 20 mA loop powered outputs. All room sensors includes Zero and Span adjustments for field calibration.
Stainless Plate Sensor is a single point temperature sensor with an output of 10K Ohms at 77°F (25°C). The temperature sensor has an overall accuracy of ± 0.36°F (0.2°C) over the range of 32 to 158°F (0 to 70°C).
The Strap-On Temperature Sensors are used for temperature measurement on warm/hot water pipes or solar collectors. The sensors are suitable for use in systems using NTC 20k temperature sensing element.
The TS-STP-10K-AA Series single point strap-on temperature sensors have an output of 10K Ohms at 25°C. The sensor can be used for monitoring temperatures in pipes, chilled water and hot water temperature.
Electronic temperature sensors are designed for use with T775 electronic controllers in commercial heating and cooling systems.
TB wall temperature sensors by Honeywell are 10K ohm NTC Type II remote wall sensors for use with the TB7200, TB7300, and TB7600 Series communicating thermostats and other devices requiring a 10K ohm NTC Type II sensor.
Trend TB/TS Thermistor Room Temperature Sensor is a wall-mounted thermistor room temperature sensor in a low profile enclosure designed for good thermal response.
TS-2100-MH series single point immersion temperature sensors shall have two colored etched Teflon lead wires for making all of the field connections. These sensors are used in indoor and outdoor applications.
TS-3000-OA Series Pencil Sensors are 3K Ohms sensors used to monitor and control the temperature. These sensors are highly accurate and gives fast response.
The H7080B series duct mounting humidity and temperature transducers are designed for environmental monitoring and control applications in industrial, commercial.
The Temperature sensors are both non-polarity and non-position sensitive. There are a number of applications in which the Temperature sensors may be used to monitor and control the building temperature.
Temperature Transmitters are double encapsulated to provide additional protection against moisture and corrosion
Trend Flying lead low cost thermistor sensor for temperature measurement operations.
The Wall Plates Series by Honeywell's Automatic Components, Inc. brings Wall Plates Temperature Transmitters with decorative, single gang brushed Stainless Steel or Smooth Satin Finished Anodized Aluminum plates for temperature sensing.
Start your search with category name, product name, part number, etc.
Copyright © 2023 Honeywell International Inc.