Agile-IQ USB Dongles are USB-Radio Frequency Interface for Windows PC for the use of the Agile-IQ Configuration software -maintenance and testing
The Pluggable CentraLine Panel Bus Binary Input Module consists with 12 binary inputs, is installed with the XS823 or XSU823 Terminal Socket
The Pluggable Panel Bus Modules communicate via the Panel Bus. This Modules are addressed manually by adjusting their HEX switches. The Panel Bus Modules is used with any CPU supporting Panel Bus communication.
DDNG485 by Ex-Or is a flexible network communications gateway designed for Scene Select II RS485 networks. The two opto-isolated RS485 ports enable the DDNG485 to implement a trunk and spur topology on large project sites.
M200E-DIN provides a DIN rail mounting option for one module of addressable Honeywell Morley-IAS and Notifier series modules.
DXc System IO Card Interfaces are used in DXc1-M (714-001-214) & DXc2-M (714-001-224) fire alarm control panels. This I/O cards are used in sounder circuits, Fire Routing interface, Fault Routing interface and Fire Protection interface.
The Digital Key Module DKM plus offer 18 freely configurable keys and 18 LEDs. Up to six Digital Key Module DKM plus can be connected to a Digital Call Station DCS plus. This allows communication stations with up to 120 keys and 120 LEDs.
Notifier Dual Enhanced Loop Interface Board is equipped with microprocessor and will continue to function in case control panel fails.
The Philips Dynalite Low Level Input Integrators is designed to enable cost-effective input integration to the Philips Dynalite control system from third-party systems such as security, HVAC and BMS.
DLLI8I8O is an eight-way dry contact interface with LED indicator outputs, that allows mechanical and electronic switches to communicate directly to the DyNet network.
End-of-line module for the end of the VARIODYN D1 voice alarm system loudspeaker line for standard compliant monitoring, when more than 20 loudspeakers are connected to a line.
Excel Smart I/O modules are LonMark® association-compliant devices, and can thus be used in all open LonWorks® environments.
Pluggable Fiber Optic module for the fiber optic switch 583394.11 in 1310 nm multimode. This provide a Fiber Optic cable length up to 2 km.
Galvanic Isolators are single channel isolated repeater. They are suitable for use as an intrinsically safe isolator between an IST200 translator module and up to a maximum of 15 x 22051EISE intrinsically safe photoelectric smoke sensors.
Honeywell panel bus I/O modules consist of a terminal sockets and a removable electronic modules, that allow for the sockets to be mounted and wired before the electronic modules are installed.
Honeywell provides IQ3 web enabled controllers which are building management system controllers that use Ethernet and TCP/IP networking technologies.
IQVIEW4 SM Box provides fully protection against damage and comes in compact design
The AVINTCDR is an RS232 or RS485 interface to an MLS Connect Digital Intelligent LCM (or CD Box) which expands the scope of the MLS system such that it can be controlled via AV equipment.
Isolated RS232 Module Kit includes PCB for isolated RS232 port for OEM interface, 80 column printer etc. The module uses 1 panel COMMS port.
Isolator module allows to isolate branch or portion of the loop affected by the short circuit from the rest of the system. Each isolator module can support up to 25 items maximum.
Leading Edge Double Plug In Control Modules have 4 Channels 2 A Per Outputs which can be used to control multiple types of load by a single device, simplifying the installation and wastes unnecessary capacity in the circuits.
Honeywell brings Lon works Bus I/O Modules which communicate via the Lonworks Bus. Software updates, configuration, and commissioning are all done automatically by the controller for all Lon works Bus I/O Modules.
LonWorks Bus I/O Modules features Flexible mix of LONWORKS Bus I/O modules covering all your application requirements
LonWorks Bus I/O Modules features wide range of sensors supported provides flexible mix of LONWORKS Bus I/O modules covering all your application requirements
LonWorks Bus I/O Module is an independently mounted electronic control system s covering all your application requirements with fixed wiring with Plug-and-play functionality for easy maintenance
Connect Digital Box is a highly flexible, configurable and intelligent lighting control module. Designed to change the way lighting controls are incorporated into buildings.
Multipurpose Modular Controller by Ex-Or provides up to eight configurable output channels, controlled by up to four interchangeable control modules.
The NFXI Output Modules consists of six changeover relays. A single isolated set of dry relay contacts, which can be wired as normally open or normally closed, is provided for each address.
NRX Radio Input-Output Modules are battery operated RF device designed for use with the NRXI-GATE radio gateway, running on an addressable fire system.
Panel Bus I/O Modules by CentraLine are consist of a terminal socket and a removable electronic module, allowing the socket to be mounted and wired before the electronic module is installed.
Panel Bus Modules consists of a terminal socket and removable electronic module allowing socket to be mounted and wired before the electronic module is installed. They are swapped out without disrupting the power.
Pluggable LonWorks® bus I/O modules consist of a terminal socket and a removable electronic module, allowing the socket to be mounted and wired before installation.
Pluggable panel bus output modules allow you to monitor and control remote points using 2-wire communication with the main controller.
Pluggable panel bus I/O modules communicate via the LonWorks® bus and panel bus respectively.
The Notifier RS485 Communication Card kit is used for networking Notifier ID61, ID62, ID2000, ID2002, ID3000 & ID3002 panels to a repeater panel.
The Remote Mount Relay includes blank plates with a remote mounting box.
Ten Channel Input Module provides an interface with normally open contact devices. The supervised state: normal, open circuit fault or short circuit alarm is sent back to the control panel.
Trailing Edge Dimmer Modules have 4 Channels 2 A Per Output which can be used to control multiple types of load by a single device, simplifying the installation and wastes unnecessary capacity in the circuits.
Honeywell provides XCITE I/O Expansion Modules for use with the IQ 3XCITE/96 and /128 controllers, offering additional input and output channel connection points.
Start your search with category name, product name, part number, etc.
Copyright © 2023 Honeywell International Inc.