The enclosure has a glazed lockable door and an internal swing frame to allow easy access to the back of the sub rack.
257 covers are extension cover kit for zone display module
3U blank cover for 19in rack mounting
The 6U blind cover for mounting the 4.5A power supply or 7A
The 6U blank cover for 19 rack mounting.
The Rack Blank Cover with Printer provision (Adapter plate and cover).
The ID3000 is a flexible, modular control panel, built from various option modules. Each module is supplied with required mounting screws, connection cables, washers etc. and installation instructions.
XS814 auxiliary terminal blocks are for use with EXCEL® 5000 systems. They mount onto already installed pluggable I/O modules in order to equip them with additional terminals.
Replacement Battery Box For Vig1-72
Bezel For Pearl Back Boxes are flush mount dress rings offers a practical way of flush mounting the Pearl panel.
Extended Bezels are double extended bezel with semi-flush mount bezel for double extended height back box
Semi Flush Mounting Bezel for ID51, ID61, ID2000 and ID3000 standard back box.
Booster Kit is located in an open, rear compartment of the main chassis. The module must be fitted before installing the main chassis in the back box. The module is secured to the main chassis using four M4 x 8 SEM screws.
Bridge Connectors transmit both communication signals and power supply between CentraLine I/O modules (exc. CLIOP831A). Supplied with the terminal socket / mixed I/O modules (exc. CLIOP831A).
CAB-C1 Extended Back Box Kit includes a single “extended height” back box powder coated in RAL 7021 extra fine texture. Will hold batteries up to 17Ah. Suitable for use with single extension. Compatible with internal PSU3A or external PSU7A.
Snap-on terminal covers for small or large controllers to prevent users touching the 230 V AC terminals.
Compact 24hr inner door assembly
The DXc Blank Covers are a part of cover kits for DXc series control panels.
DXc custom key plate cover kit accessories are used to replace the blank cover supplied with the DXc2/4 control panels or used with the extension back box.
The Morley IAS DXc Flush Bezel Kit used for Morley IAS DXc2 or DXc4 panel and the kit includes additional extension back box. Extension box is used to accommodate larger batteries, relays or other equipment.
DXc replacement door is available for DXc control panels. This replacement door is fits with all three variants of the panel, DXc1, DXc2 & DXc4 and is supplied complete with display PCB, fascia label, ribbon cable and lock.
Deep Extension Back Box Kit includes deep back book with extra depth for additional battery space. The box has an extra fine texture RAL 7021 finish.
Expansion housing for DXc series BMZ
Extended Back-Box Kits are double extended back box kit with double “extended height” back box powder coated in RAL 7021 extra fine texture. Includes power in connectors. Will hold batteries up to 17Ah.
Extended Deep Back-Box Kits are double “extended height” back box with extra depth for additional battery space, powder coated in RAL 7021 extra fine texture
Extension / Large Back-Boxes for new Pearl installations, Surface or Flush mounting, includes cover and space for 17Ah/38Ah batteries.
Extension back boxes for existing surface mounted Pearl installations. They includes cover, panel dress plates and space for 17Ah batteries.
Extension Cover Blanking Plate Kit for extension cover moulding where no extension chassis is required. May be used for customisation such as mounting of plant switches. Finished in extra fine texture.
Commissioning Lead For Vigilon Panel
Fire System Document boxes from Notifier by Honeywell are designed to complement any life safety system. The robust, lockable steel enclosure offers safe storage and fast access to essential documentation.
Flush Fixing Kits are flush mounting plate for gent xenex conventional fire detection panels
Flush Mount Dress Rings are installation kit for pearl smart fire alarm centre which includes 19in kit and finishing edge.
NANO-FLUSH from Gent is a Flush Mounting Bezel which has been designed for the Gent Nano-24 panel. The bezel will cover any imperfections in the wall when this has been cut to fit the panel.
The (VIG-24-FLUSH) Flush mounting kits can be used for Gent Vigilon Plus VIG-24 fire alarm panels and network node.Control Panels may be semi-flush mounted using a semi-flush surround.
GT40 Communications Modules are fully compliant communications solutions developed for the Galaxy® Dimension series of intruder alarm systems
Housing kit for IQ8FCT XS For surface mounting of up to 6 transponders IQ8FCT XS (Part No. 808606), consisting of housing back and cover.
Cross Connectors are used for connection of 6 relay commons.
ID3000 Extension Chassis Kits are 64 zone led extension chassis kit with Led display board for zone 1 to 65 to indicate fire and fault, disablement, test and also accept integral printer
Semi Flush Mounting Bezel for ID62 available in grey and black colour.
Flush Mounting Bezel for IDR repeaters.
IQECO/IQL SECONDARY TERMINAL COVER
Kit for mounting IQView8 embedded in an dry partition wall
SenTRI EN54 loop controlled repeat panel - Inner Door Assembly
Intelligent System Spare Parts are text insert label kit for intelligent addressable fire alarm panels
Vigilon’s range of loop powered interfaces offer a comprehensive range of connectivity options with critical plant and other safety systems
KeyMate™ key fobs contain advanced passive proximity technology small enough to fit on a key chain.
Kit Zx1/2Se Back Box Only
Kit Zx5Se Back Box Only
Large Interface Enclosures are used to mount S4 Interface modules. It consist of Plastic Box with dimension 245mmx227mmx77mm.
The Loop Powered Enclosures as the name suggests are metallic enclosure with 20 and 25mm knockouts for Vigilion's Loop Powered Intefaces.
M200 Addressable Modules Mounting Box with 20mm knockouts, consists of white plastic back and a black transparent cover.
MAXPRO Cloud is a fully integrated access, video, and intrusion Security-as-aService platform.
Accessories compatible with MPA1
Honeywell Ferrite Kit for MPA2 access control panel
Includes moulding, hinges for user interface door, push clip fasteners, Notifier label and hex fixing tool.
3U Rack Blank Cover comes with mains/gland termination.
Multi-Mount Enclosure. Metal, Black/Grey.
Mounting kit for ALR microphone Part No. 581316.
Bringing new visibility, reliability and ease of use to gas detection in semiconductor processing and industrial manufacturing. • Quick Specs • Flow Rate: 500 mLmin • Transport Time: 2 to 30 seconds maximum
020-835 is a Spare key switch and keys for Morley-IAS repeaters.
The new Galaxy Flex range expands the product offering to the security market and offers total flexibility that translates into a number of benefits for installer and end users.
Display Assemble Kit for NF2000 includes a display plate (2× 40 LCD).
Display Kit for NF300. It Includes display plate with 240 × 60 pixel LCD and assembly kit.
NF3000 Extended & Deep Rear Case from Notifier comes with an extra fine texture, deep RAL 7021 housing with an extension for additional batteries. Can be used with the simple extension. Compatible with internal and external PSU power supplies.
Optional Cover from RIO is plastic accessory
ID61 & ID62 Replacement PCB Assembly Kit includes Lcd and Membrane.
Honeywell provides PW- series high density enclosures for PW- series modular access control systems.
Honeywell provides PW-series remote enclosures for PW-series access modules.
Pearl Spare First Fix Bracket
Pearl Spare Keyswitch
Rack Mount Kit for Pearl panel enables the Pearl to be mounted in a 19in rack.
Notifier Rack Mounting Assemblies are 6 U 19in adapter plates and covers used for standard chassis, printers and 256 zone display modules.
The Floor mounted only back box with extra depth for additional battery space. Powder coated in RAL 7021 extra fine texture. Includes power in connectors. Will hold batteries up to 78Ah. Compatible with PSU7A (020-579).
Replacement Inner Door for VIGPLUS-24 and VIGPLUS-72 (supplied in Black)
Replacement Kit Membrane Switch Main ID3000
Replacement Moulding/Cover Plate for Xenex Control Panel.