Asia Pacific
Europe
Middle East
North America
Switch and Wiring Loom are designed as spares for SAFE which is introduced as an engineered solution for your building and to avoid the risk of generating multiple false evacuations.
200 Series Isolator Base provides short circuit protection in communication loop
The 34000 S-Quad adapter base provides a simple and cost effective solution for the replacement of ageing 34000 range sensors with current S-Quad Sensors.
UL certified, explosion-proof flammable gas detectors with high temperature version certified to 150°C. • Quick Specs • Operating temperature range: -25° to +150°C (-13°F to +302°F) • Operating pressure: 75 to 110kPa (750 to 1100mbar)
F-A3384-000 air filters are replacement filters for 8000 Series detectors. These filters combine a 30 micron filter element and a plastic housing into a single module that reduces service time and labor.
Replacement Key for ASD/LASD Aspirating detectors or A300 series housing.
ASD ADPTR 25MM ABS TO 22MM COPPER
ASD FLUSH SPL PT KIT
Socket with Insulator and Output for External Indication.
Angle Brackets by Gent are designed for use in areas where beam detector will not be installed to a vertical surface, or where the beam path is not perpendicular to the installation surface.
Apollo Detector Discovery Baffles are used to direct the sampled airflow through the point detectors housed in the ICAM IAS aspirating smoke detector.
B401 plug-in detector bases are used with System Sensor® smoke and heat detectors. These bases make detectors more versatile than equivalent direct-wired models.
Baffles are used to direct the sampled airflow through the point detectors housed in the ICAM IAS aspirating smoke detector. Baffle are used for Gent S-Quad S4-710OH, S4-911 02HCO, S4-901 02HCO and comes in 10 Pack.
Batt Filter PCB/Cable For Vig1-72
Battery LEAD Pack For VIG1-72
Gent by Honeywell’s S-Quad Beam Sensors provides an enhanced solution for linear beam detection for applications where point detection is either not practical or economic.
S-Quad Beam Sensors provides an enhanced solution for linear beam detection for applications where point detection is either not practical or economic.
Beam Sensor Transmitter mounted on a base fixed to either bracket allows the detection of smoke over distances from 2 m to 100 m each mounted on a base fixed to either bracket.
Blank Plates by Xtralis are provide solutions the earliest possible warning of an impending fire hazard.
Replacement Main Control PCB for Compact Plus Control Panel
DT8300-FMK flush mounting kits are designed for use with DT8320 Series DUAL TEC® motion sensors.
Detector Cover Assembly with EMC Shields are spare parts of Very Early Smoke Detection Apparatus (VESDA).
Detector removal tools are suitable for removing Series 9x00 as well as IQ8Quad detectors.
Duct Sensor is an accessory designed for the Vigilon System Sensors.
E700
The ECO 1000 deep detector bases are used in the ECO1000 series detectors with fire alarm control panels.
External Filter by Esser is used in all FAAST Systems
Single or Dual Channel Accessories box for FAAST LT-200 Standalone
High Profile Enclosure is designed with DIN Rail.
Honeywell Universal V‐Box controlled Shock Sensor, Switch selectable patented Double Knock and Remote LED reset options. It has dual sensitivity control, auto reset of relay contacts.
ISP-406 is used as a cover removal tool for IAS or ILS
SMB10 universal swivel-mount brackets are designed for use with SC100 and SC105 seismic vibration sensors.
Xtralis ICAM Accessories offers Medium and fine filter elements for the internal filters inside the ICAM IFT, ICAM IAS and ICAM ILS series detectors. Replacement filters elements are available in pack of 10 with Black colour
Inline flow restrictor assembly used for refrigerated storage sampling kit. The Xtralis refrigerated storage sampling kit provides a standardised method of smoke sampling for Refrigerated Storage facilities.
SenTRI metal interface housings are used for single channel SenTRI system interface modules.
Label plate for detector base S-Quad / IQ8Quad
Label-smoke detector pipes are manufacture from ABS (Acrylonitrile Butadiene Styrene), very lightweight, versatile material, guaranteeing you easy and professionalinstallation.
Light shield is available for installation in areas where direct sunlight cannot be avoided
The 6500-LRK is long range of reflection kit for 6500 and 6500S Reflected Type Projected Beam Smoke Detector.
MCP Flush Fixing Plate
Includes moulding, hinges for user interface door, push clip fasteners, Notifier label and hex fixing tool.
VESDA-E VEA microbore tubes are custom made, high quality plenum rated flame retardant polyethylene tubes. They have superior stress crack resistance for reliable long-term performance
VESDA-E VEA Microbore Tube Cutter are used for cutting microbore tubes.
Bringing new visibility, reliability and ease of use to gas detection in semiconductor processing and industrial manufacturing. • Quick Specs • Flow Rate: 500 mLmin • Transport Time: 2 to 30 seconds maximum
Duct Mounting Bracket
Non-return valve is designed for use with the FAAST aspiration smoke detection system.
ASD Manual Blow Through Valve Set
SEN-INT-ACDIN Interface is a 240V output interface and it comes with a DIN Rail mounting kit.
The B400 Sries Plug-in Detector Bases are intended for use in 2-wire systems with screw terminals provided for power, ground, and remote annunciator connections.
Recess Mounting Kit for remote single boxes.
S-Quad accessories is designed exclusively for S-Quad Multi-Sensor and Visual Alarms Device.
S-Quad Mounting Plate is an installation base used for installing S-Quad Multi-Sensor.
S-Quad Programming Tool S4-BASE-PROGRAM is used to test and program S-Quad speech products.
The S4-700 Base is designed to accept the range of combined detection and alarm devices.
Semi-flush fixing kit is designed to mount an S-Quad device. To semi-flush mount a special housing must be used which consists of a main assembly and a trim ring.
Beam angle bracket accessories are used for SenTRI beam sensors.
Parallel Bracket is the accessory for mounting the pair of beam sensors.
SenTRI DIN rail mounting kits are used in SMS SenTRI range of addressable interface modules.
Replacement dust covers are for use with System Sensor® 100/200 Series smoke detectors.
Siemens FDOOTC241 / FDOOT241-A9 Baffle is with FDB222 base (pack of 10)
Low profile base accessories are used for KAC’s conventional sounder beacons.
Spare Key Pack for 34450 & 34440 (2 keys)
Spare Key for Vigilon and Compact Outer Door (Pack of 10)
Spare Plastic Front cover for VES-A00-P smoke detector. It has LEDs in it for indication.
Gent Nano Spares Pack
Spares pack for Vigilon Compact
The ES Detect automatic detector is an intelligent nonaddressable detector specifically designed for operation on conventional detector groups
Survey cup adapters are used to interface agile cup with solo range of poles.
he T-Breaker Unit allows a spur to be created from a Gent analogue addressable loop circuit.
TG60 Protective Housing by Esser is a part of the accessories in Installation & Service range. It is a protecting housing used for Surge protection for network and low-frequency signal loop and LAN-surge protection for Snap-On mounting rail.
The Terminal Plate is a product introduced for SenTRI system.
VSP-972 filters are spare filters for use with VEA aspirating smoke detectors.
Xtralis spare front cover is use with the VESDA-E VES & VESDA-E VEP Aspirating Smoke Detector. It consist of plastic with 3.5in Display size.
The VESDA Modbus high level interface models links VESDAnet1 with PC software monitoring tools, building management systems (BMSs) or fire alarm control panels (FACPs). They are Type 2 models which have the echoing function is disabled.
VESDA Sensepoint XCL Replacement Filter
VESDA-E Filter Cartridge is field replaceable filter of VESDA-E detectors. It filters coarse particles
VSP-960 is used as an mounting bracket for VESDA-E.
The VESDA-E VEA series of detectors combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.
VESDA-E VEA RA joiners are right angle joiners for VESDA-E VEA microbore tubes. They come in packs of 10.
VESDA-E VEA sample point installation tools are used for installing VSP-980-ST stainless steel sampling point units.
VESDA-E VEA-40 Mounting Bracket is an accessory for VESDA-E VEA Local Relay StaX.
Xtralis VSP-955 are Scanner Manifold spare part for VESDA-E VES Aspirating Smoke Detector.
VESDA® filter cartridges are used to replace filter cartridges in VESDA VLC, VLF, VLP, and VLS detectors.
The VEU series of Aspirating Smoke Detectors are the premium detector of the VESDA-E range. They are an Ultra-wide sensitivity range.
VSP-030 filters are for use with VESDA® VLI intelligent detectors.