RF-FTX Additional filter accessories are used for HPX-751E HARSH ™ analog addressable aspiration detectors.
B200S Intelligent Sounder Bases set a new standard for performance, installation, and aesthetics. They are addressable sounder bases that require a unique, separate sounder base address.
F210 flanged rings are designed for use with B210LP detector bases.
B210W is detector base used for wireless detectors. It includes a built-in magnet so that wireless devices can establish installed and tampered states.
B224BI Plug-in Isolator Detector Bases prevent an entire communications loop from being disabled when a short circuit occurs.
B224RB Detector Relay Bases are designed for use with 200 Series detectors, and provide a single Form C contact relay for the control of auxiliary functions, such as door closures and elevator recall.
CB500 wiring barriers are used to separate power-limited and nonpower-limited wiring inside of junction boxes.
Extender poles are designed for use with XR2B detector removal tools, and can extend 5 to 15 ft.
ISO-6 six fault isolator modules provide six equivalent circuits that will allow a portion of the communications loop to continue operating when a short circuit occurs on that loop.
InnovairFlex™ duct smoke detectors combine an impressive collection of innovations designed to save you time and money and provide the flexibility you need in the field.
Installation/removal tools are designed for use with System Sensor® plug-in smoke detectors. They permit installation and removal of detectors in elevated mounting locations.
Intelligent Detector Color Kits are designed for use with NOTIFIER® intelligent detectors.
The B200SR sounder and LF sounder bases are fully compatible with existing B501BH Series sounder base installations. The device enables users to select one of two B501-supported tones (ANSI Temporal 3 or Continuous) through a jumper.
The Mounting Base is required to meet local code and application requirements and for that System Sensor offers standard 4in and 6in bases.
The Gamewell-FCI Releasing Control Modules are specifically designed for fire suppression releasing applications in the E3 Series System.
ST metal sampling tubes may be installed from the front or back of System Sensor® HVAC duct smoke detection and monitoring products. The tubes lock securely into place and can be removed by releasing the front or rear locking tab.
The System Sensor SWIFT® Wireless system offers an AV base to support L-Series devices in wireless installations.
W-SYNC SWIFT® wireless synchronization modules provide audio and visual synchronization between SWIFT® notification appliances and System Sensor® wired notification appliances, supporting the integrated wired/wireless solution.
SWIFT® plastic battery cartridges are intended for use with the SWIFT AV base and SWIFT pull stations and come in a pack of 10.
Replacement dust covers are for use with System Sensor® 100/200 Series smoke detectors.
W-USB SWIFT® transceivers can be used to conduct a site survey or to interface with all addressable wireless devices allowing for faster and easier configuration.
Start your search with category name, product name, part number, etc.
Copyright © 2022 Honeywell International Inc.