Asia Pacific
Europe
Middle East
North America
1126 well assemblies come in a variety of diameters and insertion lengths.
Auxiliary terminal blocks are for use with EXCEL® 5000 systems. They mount onto already installed pluggable I/O modules in order to equip them with additional terminals.
Honeywell C7364A are the TVOC Air Quality Sensor which uses an advanced MEMS metal oxide semiconductor sensor to detect poor air quality.
C7772 wall plate temperature sensors are designed provide a resistive output signals proportional to sensed room or space temperature.
An E/P Transducer accepts a proportional voltage signal from an electronic controller and converts it into a proportional pneumatic signal of 0.2 to 1.0 bar to operate pneumatic actuators or reset pneumatic controllers.
The high-efficiency F58G,H Commercial Electronic Air Cleaner is mounted to the return air duct of a forced-air heating, cooling, or ventilating system, capturing a significant amount of airborne particles 0.3 micron and larger.
Maximize comfort and maximize HVAC performance in any environment. Honeywell’s high-accuracy sensors measure humidity and temperature giving you the control you need within commercial buildings.
The WEB-HMI series of touchscreen monitors are HTML5 IP browser compatible touchscreen monitors. They combine state-of-the-art features and top performance with an outstanding design.
A part of the Honeywell Optimizer Suite, the Honeywell Optimizer Unitary Controller allows you to wire them or connect wirelessly – even take advantage of groundbreaking twisted pair T1L technology.
Immersion well temperature sensors are five inch long stainless steel sensors that are intended for use with models C7021D2001, C7023D2001, and C7041D2001.
JACE® MAXPRO® camera drivers can have a maximum of 8 cameras per JACE controller.
LP914A and LP915A pneumatic sensors are proportional-type temperature sensors that are used with pneumatic controllers to manage pneumatic values and damper actuators. LP914A and LP915A pneumatic sensors can be duct-, well-, or wall-mounted sensors.
Parts and accessories for use with large linear valve actuators in the ML6420, ML6425, ML7420, ML7425, ML6421, and ML7421 series
Linear Valve Accessory, Packing Kit for V5050A/B, V5016, V5025 in sizes DN100-150; V5049 in sizes DN80-150
LonWorks® IF-LON2 interfaces can be used to connect Honeywell controllers via their USB port with LonWorks networks.
ML6161 and ML6174 Non-Spring Return Actuators are designed to control VAV terminal unit dampers or Honeywell ball valves.
MNxx05/10 Series non-spring return direct coupled damper actuators providemodulatin, 2-position and floating control for air dampers, VAV units, air handlers, ventilation flaps, and louvers.
MS3103, MS3105, MS4103, MS4105, MS7403, MS7405, MS7503, MS7505, MS8103, MS8105 Spring Return Direct Coupled Actuators (DCA) are used within heating, ventilating, and air-conditioning (HVAC) systems.
Used within heating, ventilating, and airconditioning (HVAC) systems to drive a variety of quarter-turn, final control elements requiring spring return fail-safe operation.
The MS4104, MS4109, MS4604, MS4609, MS8104 and MS8109 are spring return direct coupled actuators (DCA) for Fire and Smoke dampers.
Modmotor Accessories, Modutrol Motor
Series 90 Modutrol IV™ Motors are spring return and non-spring return modulating proportional control motors. These motors are used with controllers that provide a Series 90 output to operate dampers or valves.
Series 61 and Series 62 Modutrol IV™ Motors are 3-wire spring return and non-spring return floating control motors.
Series 71, 72, and 76 Modutrol IV™ Motors are spring return and non-spring return motors used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller to position a damper or valve.
From the fully featured P7660 to value-priced accuracy and performance of the P7645, Honeywell dry pressure sensors allow flexibility in mounting and easy installation.
Pluggable Panel Bus Modules allow you to monitor and control remote points using 2-wire communication with the main controller.
Honeywell provides pneumatic actuators for air dampers.
RP418 and RP818 electric/pneumatic relays are solenoid valves which open and close the air supply to pneumatic controls. The control input is an on-off line voltage signal to the RP418A-C and 24V AC signal to the RP818A and B.
Spyder® BACnet® PUB programmable controllers are designed to control HVAC equipment. These controllers provide many options and advanced system features that allow state-of-the-art commercial building control.
Spyder® BACnet® programmable VAV controllers are MS/TP network devices designed to control HVAC equipment. Each controller is programmable and configurable using the Niagara Framework® software.
SuitePRO® digital fan coil thermostats provide line/low voltage on-off control for various fan coil units in residential and commercial applications. Great for use in hotels, condos, and school classrooms.
Sylk™ I/O modules are part of the Spyder® family of products and expand the footprint of a single Spyder device, increasing the controller's ability in situations that require a large amount of physical I/O.
T631A-C controllers provide line voltage control of heating, cooling, and ventilation systems in farm buildings or storage areas.
T675A/B and T678A temperature controllers regulate the temperature of air or liquids in ducts, pipes, tanks, and boilers. Typical uses include control of dampers and valves in heating, cooling, or heating-cooling systems.
T775 Series 2000 electronic standalone controllers are the next generation of commercial and agricultural controls capable of remote sensing of temperature and providing switched and/or proportional outputs to various types of loads.
Electronic temperature sensors are designed for use with T775 electronic controllers in commercial heating and cooling systems.
T991A proportional temperature controllers provide modulating control of water or air temperatures in ducts, tanks, and similar applications.
TB wall temperature sensors by Honeywell are 10K ohm NTC Type II remote wall sensors for use with the TB7200, TB7300, and TB7600 Series communicating thermostats and other devices requiring a 10K ohm NTC Type II sensor.
BACnet® fixed function (BACnet FF) thermostats are configurable devices with 19 pre-configured applications for specific and common projects including fan coil, heat pump, and rooftop equipment control.
