B224RB Detector Relay Bases are designed for use with 200 Series detectors, and provide a single Form C contact relay for the control of auxiliary functions, such as door closures and elevator recall.

B224BI Plug-in Isolator Detector Bases prevent an entire communications loop from being disabled when a short circuit occurs.

OSID wire guards are steel cages designed to protect OSID imagers and emitters from vandalism and accidental damage. The cages are constructed of heavy gauge steel wire with a corrosion-resistant polyester coating.

Installation kits for OSID detectors include a laser alignment tool, a test filter, a PC cable, a cleaning cloth, and a manual.

VSP-877 flush-mount sampling points provide a functionally and aesthetically improved alternative to the conical sampling points used in Xtralis® aspirating smoke detection (ASD) pipe networks.

SB-I/O surface-mount backboxes are for use with Silent Knight® PS-SA and PS-DA pull stations.

Open-area smoke imaging detection emitters (OSIDs) are a new innovation in projected beam smoke detection technology using advanced dual wavelength projected beams and optical imaging technology for early warning smoke detection.

OSE-RBA spare alkaline battery packs are intended for use with the open-area smoke imaging detection (OSID) devices.

The VLI detector combines a fail-safe Intelligent Filter (patent pending) with an advanced clean-air barrier for optics protection allowing the use of absolute detection and a long detection chamber life without the need for recalibration.

Single Terminal Back Boxes are used for mounting RTS151 key. Remote annunciator accessories providing reset function and has a Red LED to indicate alarm conditions.

The VESDA Modbus high level interface models links VESDAnet1 with PC software monitoring tools, building management systems (BMSs) or fire alarm control panels (FACPs). They are Type 2 models which have the echoing function is disabled.

FM Series electromagnetic door holders are designed for virtually any remote door release application. They are primarily used to hold fire and smoke barrier doors open until released by a remote smoke detector or other switching device.

SSM Series alarm bells are low-current, high-decibel notification appliances for use in fire and burglary systems or other signaling applications.

The B200SR sounder and LF sounder bases are fully compatible with existing B501BH Series sounder base installations. The device enables users to select one of two B501-supported tones (ANSI Temporal 3 or Continuous) through a jumper.

L-Series horns are designed to simplify installations to provide primary and secondary signaling for fire and security applications.

VESDA-E VEA sampling point and microbore tube is fully supervised by the detector. VEA sampling points are available in two different type standard and surface mount. It can be used in Healthcare, Offices and Electrical cabinets.

VESDA® Modbus type 3 HLIs act as a proxy for all VESDA devices on the VESDAnet™ network, providing access to rich status information available from VESDA detectors, as well as the ability to control and configure these devices.

System Sensor BEAMSMK are the surface mounting kit for the reflective projected beam smoke detector which are used whenever surface wiring is being used.

Backboxes are for use with fire alarm control panels (FACPs) and are used to mount up to two batteries and power supplies.

The printer is used with the Gamewell-FCI fire alarm control panels (FACPs) and provides printer capability to produce a written record of system events and status changes.

VSP-972 filters are spare filters for use with VEA aspirating smoke detectors.

VESDA® LCD Programmers are menu-driven, allowing the user to conveniently configure, commission, and maintain a VESDA aspirating smoke detection system, as well as program each individual detector.

L-Series with LED Speaker Strobes are rich with features guaranteed to cut installation costs and times with its lower current draw and modern aesthetics.

L-Series LED strobes are rich with features that increase application versatility, simplify installation, and maximize profits with lower current draw and modern aesthetics.

Alarms, audible and visual alarms, water flow indicators and others

SpectrAlert® Advance Series horns are designed to simplify installations to provide primary and secondary signaling for fire and security applications.

FSX™ fire and flame detectors sense the WideBand IR™ radiant energy of blackbody particulate and molecular emissions generated by both hydrocarbon and nonhydrocarbon flames and fires.

Banderoles to mark the suction points

Accessories and Spare parts for the Sensepoint XCD family

Single-gas and multi-gas mixtures for monitor calibration

FS20X Flame Detector

Common accessories and spares for the Sensepoint, Sensepoint XCD, Sensepoint XRL, Series 3000, OELD and RAEGuard 2

XCD Sensors and Transmitters supplied separately

Industrial Gas Transmitter

VSP 850 in-line filters provide Xtralis® customers the ability to address a wide array of harsh environments with high levels of airborne contaminants in a simple and cost-effective manner.

AGILE wireless base

Remote Scan display provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators.

The VESDA-E VEA Power Supplies are designed to power the VESDA-E VEA Detector and VESDA-E VEA Relay StaX including battery backup. It provides 24 volt operating power to the VEA unit as well as battery charging function.

The 19 inch rack enclosures are designed to house up to 20 display and programmer modules in a wide variety of configurations to suit the particular requirements of a site where centralised control and monitoring of the VESDA system is required.

OSID environmental housings protect OSID imagers and emitters from dust and water ingress in industrial environments. The glazed housings are made of ABS and the glass windows cause minimal attenuation of the UV and IR beams.

OSID environmental housings protect OSID imagers and emitters from dust and water ingress in industrial environments. The glazed housings are made of ABS and the glass windows cause minimal attenuation of the UV and IR beams.

RPS-1000 is an intelligent distributed power module that adds 6.0 amps of power, six Flexput™ I/O circuits, and two Form C relay circuits to a compatible Honeywell Farenhyt Series addressable system. They are available in a red or black cabinet.

Remote annunciators are designed for both conventional and intelligent applications. Their red LED provides visual indication of an alarm condition.

VSP-960 is used as a mounting bracket for VESDA-E.

VESDA-E Filter Cartridge is field replaceable filter of VESDA-E detectors. It filters coarse particles

VLI Secondary Foam Filter is an Internal secondary filter spare part for VESDA VLI.

VSP-030 filters are for use with VESDA® VLI intelligent detectors.

Addressable Pull Stations by Farenhyt are active fire protection devices and are designed to work with Silent Knight IFP-series fire alarm control panels.

VESDA-E Smoke Detection Chamber

VESDA-E Series aspirator

VESDA-E VEA Series of detectors combine VESDA® reliability and early-warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.

i³™ Series offers conventional, photoelectric and photo/thermal smoke detectors in both 2-wire and 4-wire formats.

Vesda Test Transformers are previously known as the Hot Wire Test Power Supply Unit. They are used to test very early warning aspirated smoke detection equipment.

VESDA® VLI early warning aspirating smoke detection systems are designed to protect industrial applications and harsh environments up to 21,520 ft2.

Honeywell's farenhyt series smoke detectors are intelligent plug-in smoke detectors designed for both performance and aesthetics.

Multi-Spectrum™ SS4 electro-optical fire detectors are fast reacting, digital, configurable, computerized “smart” units.

Fire detector protective cover helps prevent malicious or accidental false fire alarms. This unique device has helped prevent false fire alarms around the world for decades.

Surface backboxes are for use with Fire-Lite® BG-12LR agent release stations.

Intevio extension keypads are for use with remote call stations. Models available with four function buttons/LED indicators, and eight function buttons/LED indicators.

SpectrAlert® outdoor selectable output speaker strobes provide a broad frequency response range, low harmonic distortion, and maintain a high sound pressure level at all tap settings to provide accurate broadcast of evacuation messages.

The System Sensor M500X Fault Isolator modules enable part of the communications signaling line circuit to continue operating when a short circuit occurs. The Module is an automatic switch that opens when the line voltage drops below four volts.

SpectrAlert® Advance horn strobes include a variety of features that increase application flexibility and simplify installation.

KILLARK® XAL-53 explosion-proof pull stations are suitable for use in hazardous areas due to the presence of flammable gases or vapors, combustible dust, or easily ignitable fibers.

WFDTN t-tap water flow detectors consist of a rugged, NEMA 4 rated enclosure that is more damage resistant than previous metal designs.

Multi-Spectrum™ SS2 electro-optical fire detectors provide ultra-high speed responses to explosive fires and feature programming to assure ultra-high speed millisecond response.

SK-NIC-KI accessory install kits are for use with Silent Knight® SK-NIC network interface cards.

Xtralis Smoke detector is an interface card for the range of Xtralis VESDA VLF smoke detectors. Multi-function Control Card expands the range of input and output communications a VLF detector can perform.

VESDAnet sockets interface are required when a standard unit is used to provide a flexible solution where permanent mounting is not required in this case VESDAnet sockets connects the HLI onto the VESDAnet network.

Honeywell's farenhyt two wire interface modules have been designed for use with Silent Knight IFP-series fire alarm control panels (FACPs).

VESDA-E Sampling Module

VESDA Pipe and Fittings are part of an integrated system manufacturedfrom specialty plastics designed for use with most aspirating smoke detectionsystems, the VESDA VLP system in particular

The VESDA-E VEA Microbore tubes are custom made, high quality plenum rated flame retardant polyethylene tubes that are reliable long-term performance. They are lightweight and flexible for easy handling and installation.

L-Series Surface Mount Back Boxes are the best solution in locations where you have a hard surface to mount to.

Sync-Circuit Modules synchronize SpectrAlert Advance strobes, horns, and chimes over a single pair of wires.

OSID beam detector FTDI cables allow connection of a PC with OSID diagnostic software to the imager.

Ceiling Loudspeaker gives desired interior compatibility for a better match with environments, ceiling loudspeaker features a high sound pressure level and a wide frequency response range, ensuring flawless acoustic performance.

Ceiling Loudspeaker is a cost-competitive ceiling loudspeaker which has an excellent audio performance and aesthetic appealing enclosure. This full range loudspeaker features a high sound pressure level and a wide frequency response range.

Honeywell's SpectrAlert® Advance SP series speakers are dual voltage speakers designed for fire protective signaling systems.

X-DA High Efficiency Power Amplifiers are the Class-D amplifiers and they are lighter, more stable, and high efficiency. The audio transmission is completely digitalized which makes it free from interference and easy to be controlled

Test, mounting and interface accessories and spares for the FS20X and FS24X Flame Detectors

System Sensor L-Series speakers reduce costly ground faults using a plug-in design and universal mounting plate that allow the installer to pre-wire mounting plates, dress the wires, and confirm wiring continuity before plugging in the speakers.

SpectrAlert Advance Outdoor Back Boxes ensure a NEMA 4X weatherproof listing for AV devices.

System Sensor L-Series speakers reduce costly ground faults using a plug-in design and universal mounting plate that allow the installer to pre-wire mounting plates, dress the wires, and confirm wiring continuity before plugging in the speakers.

L-Series speaker strobes reduce costly ground faults using a plug-in design and universal mounting plate that allow the installer to pre-wire mounting plates, dress wires, and confirm wiring continuity before plugging in the speakers.

302 Series rate-anticipation heat detectors operate within a controlled range of two to three degrees of their setpoints, regardless of the rate of temperature rise. These detectors are available in either 135 °F (57.2 °C) or 194 °F (90 °C) ratings.

L-Series LED strobes are rich with features that increase application versatility, simplify installation, and maximize profits with lower current draw and modern aesthetics.

L-Series LED 2-wire horn strobes are rich with features that increase application versatility, simplify installation, and maximize profits with lower current draw and modern aesthetics.

L-Series LED 2-wire horn strobes are rich with features that increase application versatility, simplify installation, and maximize profits with lower current draw and modern aesthetics.

5600 Series mechanical heat detectors offer property protection against fire and are intended for non-life-safety installations where smoke detectors are inappropriate.

Honeywell's Farenhyt series Analog Addressable Fire Alarm Control Panels are the controlling unit of a fire alarm system with an Emergency Communication System (ECS).

L-PCP ceiling loudspeakers are powerful ceiling mounted speakers. They are specially designed for environments, such as shops, supermarkets, educational institutes, offices, sports fields, hotels, restaurants, and wet environments.

L-PWP public address cabinet loudspeakers are intended for use in general indoor and outdoor applications.

Unidirectional projection loudspeakers are high-performance, 10W or 20W public address speakers.

L-PBM20A bi-directional projection loudspeakers are high-performance, 20W public address speakers. They offer a broad frequency response range, low distortion, and a high sound pressure level.

Serial and parallel gateway modules allow you to connect virtually any standard PC-compatible printer to a Silent Knight® Series fire alarm control panel (FACP) and to generate reports on site.

Amplifier Mounting Kits by Silent Knight are used to amplify the audio message for distribution throughout the facility.

The ECS-DUAL50W intelligent amplifiers are used to amplify audio message for distribution throughout a facility.

RA-2000 remote annunciators are used to operate and program Silent Knight® Farenhyt™ Series fire alarm control panels (FACPs).

The FFT-STSS and FFT-STSR are compatible with the Fire Fighters Telephone communication system. The FFT-STSS is a surface mount door with keylock. The FFT-STSR is a`recessed mount door with keylock

ECS-INT50W is capable of producing 50 watts of audio power on one speaker circuit. It is designed to conveniently mount in the IFP-2000ECS, IFP-1000ECS or IFP-100ECS cabinet, making it an ideal solution for small voice evacuation installations.

5820XL LED I/O driver modules provide an effective means to customize your remote annunciation. They provide LED annunciation and control inputs for the fire alarm control panel (FACP).

Surface-mount trim rings are for use with Silent Knight® remote annunciators.

Remote mounting kits are for use with Silent Knight® 5815XL signaling line circuit (SLC) expanders.

Farenhyt Distributed Power Modules are connects to the FACP via the RS-485 system bus allowing up to an additional 6,000 feet of wiring. They are optically isolated providing ground loop isolation and transient protection.

SK-F485C fiber to SBus converters offer a seamless conversion from panel SBus connection to fiber and back again.

005883 relay interface boards provide 10 general purpose Form C relays that can be used to control any device that requires a dry contact closure.

FFT-FPJ firefighter phone jacks provide a quick connect to the SK-FFT fire fighter telephone system using an FFT-RHS remote handset.

The 24 switch Zone Expander Card used for emergency communication system.

005860T surface-mount trim rings are for use with Silent Knight® 5860 remote annunciators. Red and gray options are available.

Remote mounting kits are for use with Silent Knight® 5815XL signaling line circuit (SLC) expanders.

Network Voice Control Modules by Honeywell are an integral part of ECS accessories used for IFP-2100ECS. It has a supervised microphone for live communication and an interface for the Emergency Communication System.

Enclosure for IFP-2100 Series analog/ addressable fire systems.

Multi-mode and single-mode fiber-optic modules are plug-in fiber loop modules that work as a single channel to transmit or receive communications with Silent Knight® network interface cards.

The Remote Voice Module provide an interface to the emergency communication system and a supervised microphone for live communications.

FFT-24 expander boards allow an additional 24 zones to Silent Knight® fire fighters telephone control systems.

Adds four additional audio circuits to the ECS-125W

LED/Switch Card by Silent Knight is an accessory used for IFP-2100ECS.

The X-SMART System Management Software includes mediun to small project management software. It is a server-side system resource platform and a client-side management system.

LM2-PCP06x modular ceiling loudspeakers are 6W economic speakers.

The ECS-DUAL50W is an intelligent 50 watt dual channel amplifier for use with the IFP-100ECS, IFP-1000ECS or IFP-2000ECS. The ECS-DUAL50W is used to amplify audio message for distribution throughout a facility.

The ECS-50W is an intelligent 50 watt amplifier for use with the IFP-100ECS, IFP-1000ECS and IFP-2000ECS.

Intelligent 50W amplifiers are for use with the IFP-100ECS, IFP-300ECS, IFP-1000ECS, IFP-2000ECS and IFP-2100ECS fire alarm control panels.

FFT-HSC Firefighter handset cabinets can hold up to 10 remote handsets.

The Remote Paging Unit that provides a supervised microphone, 8 emergency message buttons, and 16 mappable audio switches. This lower profile remote paging unit is ideal for locations where the standard LOC won’t fit.

Agile Wireless Thermal Detector

Sensepoint Toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output

Accessories and Spare parts for the Sensepoint XRL family

FS24X Flame Detector

Sensepoint XCD RTD

The UL/CSA Aluminum 3 wire Junction Box Assemblies are optional accessories that can be used for remote sensor mounting.

The Duct Mounting Kits provides installation of sensors directly into ducts with diameters from 3 to 16in.

Bluetooth-Enabled Industrial Gas Transmitter

Replacement sensors for the Sensepoint XCL and Sensepoint XRL families of gas detectors

Sensepoint XCD

System Sensor Select Series detector color kits offer expanded color options to meet varying aesthetic applications.

ASD TXT-SPEECH ENG-JILL US

ASD SITE LIC PRIMARY KIT VSM4

EQBB backbox assemblies are for use with EQ Series cabinets. These assemblies are available in red or black and feature two, three, or four tiers.

Bluetooth-Enabled Aesthetic Gas Detector