The MI-MM3E-S2 is an addressable input module. It will interface with contact devices such as security contacts, water flow switches and call points.
Micro processed 12-zone fire detection control panel incorporates source supply of 2 supervised siren outputs, general alarm relay, general fault relay, general indicators and provides digital input for remote reset,
2-way relay board for BMZ series NFS
B501 bases are four-inch flangeless mounting bases designed for use with System Sensor® 200 Series detectors. They are intended for use with intelligent systems that have screw terminals for power (+ and -) and remote annunciator connections.
ZX1/2Se retrofit 4 line display kit including display plate and overlay.
6500RS are conventional reflector- type linear optical beam smoke detectors designed to operate as a component of a conventional fire alarm system
DXc Control panels are supplied without zone LEDs. Two zone LED kits are available that include PCB, ribbon cable, zone number labels & fixings. Zone LED PCB is fitted to the lower half of the front door as shown on the right.
8 way input/output cards Provide up to 8 configurable relay outputs or up to 4 command inputs and 4 outputs.
RF-FTX Additional filter accessories are used for HPX-751E HARSH ™ analog addressable aspiration detectors.
The call points are an addressable break glass manual call points which has a simple rotary decade switch at the rear of the unit for addressing.
Addressable Manual Call Point is an MCP that has a simple rotary decade switch at the rear of the unit for addressing. Call Point is designed to provide a manual alarm interface to Morley IAS’s fire alarm control panel.
The range of intelligent audio visual wall mount sounders are designed to be connected to analogue addressable fire alarm systems. These sounders receive their power from the loop, and can be controlled via the communication protocol(s).
Intelligent Wall Mounted Sounder Strobe, Pure White skirt, Clear Lens with Isolation
Zone Interface Module
Battery box or mounting enclosure which has Size 500 x 500 x 185mm (H x W x D).
Call point cover seal - Pack of 5 non World Series (Old PN: P 056)
Central Extinguishing Unit as system status indicator LEDs and a display with two digits of the operating time discharge.
Communication modules are plug-in expansion modules for use in the ZX series intelligent multi-protocol fi re alarm control panels.
The Horizon series of conventional control panels 2 Zone has been developed to provide a simple and reliable solution to the demands of today’s fire detection solutions.
The Horizon series of conventional control panels 4 Zone has been developed to provide a simple and reliable solution to the demands of today’s fire detection solutions.
The Horizon series of conventional control panels 8 Zone has been developed to provide a simple and reliable solution to the demands of today’s fire detection solutions.
Conventional Fire Alarm Control Panels by Horizon Range offers an out of the box and on the wall solution.
The Morley-IAS DX Connexion panel is ideally suited for use in the protection of small to medium sized buildings.
The DXc Blank Covers are a part of cover kits for DXc series control panels.
DXc custom key plate cover kit accessories are used to replace the blank cover supplied with the DXc2/4 control panels or used with the extension back box.
The Morley IAS DXc Flush Bezel Kit used for Morley IAS DXc2 or DXc4 panel and the kit includes additional extension back box. Extension box is used to accommodate larger batteries, relays or other equipment.
DXc Network card are fitted to each panel in order to create a network and to connect panels together.
The Morley IAS Fire System by Honeywell product 795-122 is a RS232 communication card kit designed for use with the Morley DXc range of analogue addressable fire alarm control panel.
Morley-IAS Fire Alarm Control Panel has qualities of reliability, flexibility and value with advanced features and intuitive functionality.
The DX Connexion is an enhancement of the Morley-IAS Dimension panel range. The DX Connexion Panel series also include the modular unit PCB and Base Card.
DXc replacement door is available for DXc control panels. This replacement door is fits with all three variants of the panel, DXc1, DXc2 & DXc4 and is supplied complete with display PCB, fascia label, ribbon cable and lock.
DXc 2 loop base card - Morley Protocol
A replacement text inserts pack includes all text inserts/slide-in labels including both blank and numbered labels for Zone LEDs.
DXc1 rack mounting kit accessories are used for DXc1 one loop fire alarm control panels.
The ECO1002 multi-criteria detector uses a state-of-the-art optical chamber and a thermal element combined with a microprocessor, running sophisticated algorithms to provide quick and accurate detection of fires.
ECO1003 optical smoke sensors use state-of-the-art optical chambers combined with application-specific integrated circuits (ASIC) to provide quick and accurate detection of fires.
Morley provides Loop-Powered EN54-23 Detector Base Sounder Strobes with Isolated Version & Non-Isolated Version. The range is used in analogue addressable fire alarm systems.
Expansion housing for DXc series BMZ
Morley - IAS' Extension Back Box Bezels are flush mounting bezels that fits a DXc1 panel with additional extension back box.
External Paging Interface Module supports SCOPE, ASCOM/ TELENOVA and HLSUK paging products. It Requires RS485 card to be fitted in control panel.
The Honeywell fire alarm connection panels are ideally suitable for use in the protection of small to medium sized buildings. All in all, it is a compact, high performance, feature rich, economical fire alarm control panels
Flush Bezel Kits by Honeywell are covers can be purchased to suit your needs and include a blank cover, Customer key plate and 80 Zone LED expansion cover.
Flush Bezel kit is used in DXC1.
Graphics software and dongle package enables the display of key information from their analogue addressable fire detection and fire alarm system.
The HM Series Photoelectric smoke detectors by Honeywell deliver high responsiveness, reduced sensitivity to dust and false alarms resulting from ingress of insect and other debris.
Honeywell Bluetooth Dongles are elegant Bluetooth Low Energy (BLE) product by Honeywell that are used for seamless interface with the Morley DXc Panel.
The 797-062 is a Semi flush mounting kit for ZX5(S)e control panel.
Horizon Conventional Fire Alarm Control Panels are a reliable fire alarm detection solution that have been equipped with configurable class change inputs, coincidence detection and programmable delays.
Indication Expansion Modules by Morley-IAS are designed and constructed around proven and reliable microprocessor technology & simple approach has produced modular, scalable fire alarm platform suitable for protecting all types of premises.
The Call Points are available with or without an integral isolator and are designed to provide a manual alarm interface to Notifier fire alarm control panels where additional protection against the environment is necessary.
The intelligent manual call points are designed to provide manual alarm interface to Morley-IAS fire alarm control panels.
Intelligent water resistant version red color manual call point surfaces are designed with break glasss element and isolator.
Intelligent Call Points by Morley-IAS are designed to provide a manual alarm interface to Morley IAS’s fire alarm control panel.
Isolator module allows to isolate branch or portion of the loop affected by the short circuit from the rest of the system. Each isolator module can support up to 25 items maximum.
The MCP5A product has the Advanced Protocol embedded. A version of this call point with built in isolation is also available.
MODBUS Interface Modules connects to the RS-485 peripheral bus of the ZX series fire alarm control panels and allows panel interrogation by Modbus control system.
One or two Input modules by Morley-IAS provide supervision of one input circuit from external devices, granting maximum flexibility to a Morley fire detection and alarm system.
Morley printer Paper Roll & Ribbon used for ZXe/ZXSe Internal Printer Module for use with ZX5Se panels.
Morley ZXse RMU Module Kit provides an IP interface from panels to AMX graphics package.
Morley-IAS Bezel Kits are semi flush mounting kit for ZX1(S)e or ZX2(S)e control panel.
Morley-IAS DXc Expansion Mimic PCB Includes Silence Sounders, 2 Level Access Key, Allows Geographic ‘Floor Map’ Zonal Indicators To Be Built For Situations Where Increased Clarity Of The Fire Location
The Key and cylinder kits are for DX CONNEXION control panels that allows the user to access level 2 function keys without using a password.
Morley-IAS, Loop Powered Open Category Detector Base Sounder Strobe available in isolated/ non isolated version. Requires a B501AP base for fast and simple installation for Morley detectors.
Programmable Sounder CardThe 4-way sounder card consists of 4 supervised sounder outputs built on a single printed circuit board Eachsounder output provides a supervised 24V DC polarity reversal circuit.reversal circuit
Morley-IAS ZXSe Fire Alarm Control Panel is an Intelligent Fire Alarm Control Panel. It has been designed and constructed around proven and reliable microprocessor technology.
PS200 Hinged Cover Range of accessories to provide protection against accidental damage and extra security and Fully compatible with all call points and Customised branding available
RS 232 Communication Modules by Morley-IAS are suitable for modem and leased or private line are used.
RS485 Communication Module supports two-wire RS485 multidrop transmission between networked ZX2Se/ZXSe/ZX5Se control panels
Rack mount kit fits a DXc2 panel or DXc4 panel.
Remote Connection Hardwares are Morley Echoback device disablement logging activation
This Product is used as Serial Protocol converter from RS485 to RS232
Morley 796-171 is a replacement/spare base PCB/motherboard for the Morley ZX1SE fire alarm control panel.
Surface Mounting Boxes by KAC are providing a unique ˜plug and play™ concept designed specifically to reduce installation time.
Thermal printer paper rolls are replacement paper rolls for the 795-060-002 external printer of Morley ZX series fire alarm panel range.
Transformer Rectifier by Morley- IAS designed for fire and access control applications that require remote control of the power supply output.
Morley-IAS introduces Two Loop Expansion Cards which are used in the Morley-IAS DX Connexion panel. The Morley-IAS DX Connexion panel is ideally suited for use in the protection of small to medium sized buildings.
Conventional Control Panels with 4 zones has been conceived and designed for the installation of small and medium-sized fire detection systems in those places where it is necessary to interface with an easy and high-performance central unit.
Conventional Control Panels with 8 zones has been conceived and designed for the installation of small and medium-sized fire detection systems in those places where it is necessary to interface with an easy and high-performance central unit.
Glass front door kit are use with the ZX5e intelligent addressable control panel.
ZX range spare parts base PCBs consists of 5 loops and are used for ZXSe intelligent multi-protocol fire alarm control panel.
ZX Range Spare parts are used in ZX series control panels
The Morley-IAS 40 character external printer is a self-contained printer with a built-in power supply & battery charger that can be connected to the ZX series control panels to provide hard copy documentation of the events.
The ZX series is an intelligent fire alarm control panel. The ZX series simple approach has produced a modular scalable fire alarm platform suitable for protecting all types of premises.
The ZX range of 1, 2 or 5 loop modular, scalable intelligent fire alarm control panels are suitable for protecting all types of medium to large properties.
Battery box or Mounting enclosure for ZX1/2Se control panel by Morley IAs
ZX1SE and ZX2Se Glass Door Kit, comprises a new inner door and plaxiglass window.
The Morley IAS by Honeywell presents ZX5SE series semi-flush mounting bezel kits which forms a part of ZX5SE fire alarm control panel. They are used for the Morley IAS active & passive repeater panel range.
ZX5SE Door is a spare part for intelligent fire alarm control panel.
Morley ZXse AMX Level software and regular licence enables the display of key information from their analogue addressable fire detection and fire alarm system. It can be upgraded with the features to extend the software capabilities.
The ZXSe range of intelligent fire alarm control panels has been designed to assist with the normal operation of a fire detection system.
Internal Printer for use with ZX5Se intelligent fire alarm control panel.
ZXSe Mounting Brackets are 'L’ shaped to fit peripheral pcb’s into Zxe/ZX5e/ZXSe
ZXSe Programmable Output Relay Module consists of 4 relay outputs built on a single printed circuit board. Each output relay provides single pole double throw (SPDT) switching action for other locally powered equipment.
The ZXSe range of analogue addressable fire alarm control panels have been designed and constructed around proven and reliable microprocessor technology.
Zone LED kits are available that include PCB, ribbon cable, zone number labels & fixings. Zone LED PCB is fitted to the lower half of the front door.
Start your search with category name, product name, part number, etc.
Copyright © 2022 Honeywell International Inc.