100 Series conventional heat detectors offer superb performance and reliability in a sleek, low-profile design.
The System Sensor low profile photo electronic smoke detector is specifically designed to meet the performance requirements of the fire detection/alarm systems.
The printer is used with the Gamewell-FCI fire alarm control panels (FACPs) and provides printer capability to produce a written record of system events and status changes.
Central Processing Unit series are used for NFS2-640 Intelligent Fire Alarm Control Panel. Central Processing Unit is provided with integral 1.5A power supply.
302 Series rate-anticipation heat detectors operate within a controlled range of two to three degrees of their setpoints, regardless of the rate of temperature rise. These detectors are available in either 135 °F (57.2 °C) or 194 °F (90 °C) ratings.
411 fire alarm communicators are compact, multifaceted, slave devices designed for a variety of fire, security, and non-fire applications.
411RK auxiliary relays are for use with Gamewell-FCI® 411UDAC digital alarm communicator transmitters.
411UDAC fire alarm communicators are compact, multifaceted, standalone or slave devices designed for a variety of fire and non-fire applications.
4XZM zone relay modules provide four Form C relay contacts to fire alarm control panels (FACPs).
4X™F transmitter modules provide output for local energy municipal box transmitters, and alarm and trouble reverse polarity circuits. The modules include a disable switch and disable trouble LED.
5600 Series mechanical heat detectors offer property protection against fire and are intended for non-life-safety installations where smoke detectors are inappropriate.
6500-MMK multi-mounting kits allow 6500 beam smoke detectors to be mounted to ceilings or to walls where the detector and reflector cannot be mounted within 10° of one another. One kit mounts either the transmitter/receiver unit or reflector.
6500-SMK surface-mount kits are intended for use with beam detectors to mount transmitters and receivers when using 6500-MMK multi-mounting kits.
The Backlit LCD annunciator for the Notifier fire alarm control panels, or network control annunciators that support the 80-character display format. LCD annunciator may be connected onto the four-wire EIA-485 terminal port.
The AA series audio amplifiers provide traditional high level audio technology for use with Notifier’s integrated voice evacuation systems
AA series audio amplifier provides traditional high level audio technology for use with Notifier’s integrated voice evacuation systems.
The ACS-Series Annunciator and Control System provides arrays of LEDs to indicate point status, zone status, system status, and ability to perform system reset, silence, acknowledge and drill
The Dress Panel for one touchscreen display and two ACM-30 annunciators to be mounted in a CAB-5 Series cabinet
Flush-mount boxes are for use with Fire-Lite® ACS Series annunciators. These enclosures provide remote mounting of a single annunciator module.
The ACS-Series Annunciator and Control System provides arrays of LEDs to indicate point status, zone status, system status, and ability to perform system reset, silence, acknowledge and drill.
Key lock door for recessed mount is an accessory for emergency telephone stations.
AFAWS Series accessories for emergency telephone stations include backboxes, latching and locking doors, and break glass inserts.
AFAWS Series handset and hookswitch assemblies are available with either a standard coiled cord or durable security-type armored cable.
ANN-MBRLY mounting brackets are for use with NOTIFIER® NFW2-100 fire alarm control panel (FACP) applications.
The ANN-80 annunciator is a compact, backlit, 80-character LCD fire annunciator that mimics the Fire Alarm Control Panel (FACP) display provides system status indicators for AC Power, Alarm, Trouble, Supervisory, and Alarm Silenced conditions
AP-P adapter plates are decorative plastic adapters for mounting 302 Series detectors to four-inch outlet boxes.
Expand the versatility of the InnovairFlex™ line of duct smoke detectors with System Sensor notification and test accessories.
Accessories are designed exclusively for IQ8Quad Series Detectors.
RF-FTX Additional filter accessories are used for HPX-751E HARSH ™ analog addressable aspiration detectors.
The ACPS-610(E) is an auxiliary power supply with a battery charging option and a host of special features.
NOTIFIER’s AMPS-24/E is an addressable power supply and battery charger with up to three 24 V DC outputs.
Aluminum outdoor column loudspeakers are a high-performance, public address column loudspeaker for outdoor use. They offer a broad frequency response range, low distortion, and a high sound pressure level.
Annunciator Key Switches provide access security for the control switches on the LCD-160. Key-switch kit includes key, hardware, and an annunciator label.
The Annunciator Surface Box provides for the remote mounting of one annunciator module in a surface-mount enclosure. Knockouts are provided for use with 1/ 2" (1.27 cm) conduit. The annunciator mounts directly to the ABS-1B/C without a dress plate.
The Annunciator Surface Box-2B (black) provides for the surface mounting of one ACM-24AT/AEM-24AT combination or one ACM-48A/AEM-48A combination.
Anti Condensation Film is an easy applicable film that provide long time resistance to condensation on the acrylic Emitter lens
Anti-Condensation Film is used for OSID-EH housings. An easy applicable film that provide long time resistance to condensation on the glass fronts.
Aspirated Gas Detection for Micro Bore ASD System (VESDA-E VEA Addressable Aspirating Smoke Detection) and When used with the VESDA-E VEA.
The Notifier by Honeywell has AA series audio amplifiers provide traditional high level audio technology for integrated voice evacuation systems.
Auxilary power supplys by Notifier are used for the operation of peripheral devices for the ONYX Series control panels.
B110LP detector bases are designed for use with System Sensor® models 2151 photoelectronic and 1151 ionization detector heads. These 2-wire bases are equipped with screw terminals for power, ground, and an optional remote annunciator.
B112LP detector bases are designed for use with System Sensor® models 2151 photoelectronic and 1151 ionization detector heads. These 4-wire bases are equipped with screw terminals for power, ground, and an optional remote annunciator.
B210W is detector base used for wireless detectors. It includes a built-in magnet so that wireless devices can establish installed and tampered states.
BAT Series (or Power-Sonic brand) batteries are recommended for secondary power or backup power for all NOTIFIER fire alarm control equipment.
BAT Series batteries are Power-Sonic brand batteries. BAT series (or Power-Sonic brand) batteries are recommended for secondary power or backup power for all NOTIFIER® fire alarm control equipment.
Heating kits for use to prevent condensation with the BEAM1224 conventional beam smoke detectors. They lessen the likelihood of condensation by maintaining the unit at a temperature that is slightly higher than the surrounding air.
BEAMLRK long-range kits are designed for use with System Sensor® reflective projected beam smoke detectors and allow installation between 230 to 380 ft (70 to 100 m) apart.
BEAMMMK multi-mounting kits allow reflectors and reflected beam detectors to be mounted to either vertical walls or ceilings.
BDA Digital amplifiers can be used to provide one-to-one amplifier backup. Also BDA supports two-channel operation and it can be use to increased output wattage to 100W.
Backboxes are for use with fire alarm control panels (FACPs) and are used to mount up to two batteries and power supplies.
Battery charger circuit board and mounting chassis are designed for use with fire alarm control panels (FACPs).
Blank Module Dress Plate used to cover annunciator positions or panel positions and also mounts some option modules.
Blank Module Plates by Notifier are cover unused module positions in an annunciator backbox also included four stand offs which allows option modules to mount behind the black front, or inside the cabinet.
The Blanking Baffle is used with ICAM IAS aspirating smoke detector.
NCA/640-2-KIT is a Bracket installation kit required to mount NCA-2 to the CPU2-640/-640E’s standard chassis.The NCA-2 can be used as a primary display for the NFS2-640 by using NCA/640-2-KIT for directly connecting their network ports
All cabinets for NOTIFIER fire alarm control panels are fabricated from 16-gauge steel. The cabinet assembly consists of two basic parts: a backbox and a locking door.
C4 Cabinet Backbox are available in black or red. This selection provides a stylish combination to accent the décor of the finest lobby setting.
Blank plate for CA-2 chassis
Cabinet assembly consists of two basic parts a backbox and a locking door. Backbox has been engineered to offer ease-of entry for the installer. Cabinets are available in either black or red, with or without windows.
CAB-4 Series Semi-Flush-Mount Accessory Trim Rings are used for mounting accessories in Notifier's Fire Alarm Control Panel cabinet assemblies.
Notifer brings CAB-4 Series Audio Command Doors that are designed to be used with CA-2 chassis mounted in top two rows.
CAB-4 Series Cabinet for NOTIFIER fire alarm control panels are fabricated from 16-gauge steel
DR-B4 is Two Tiers, “B” Size CAB-4 Series Cabinet for NOTIFIER Fire Alarm control panels.
CAC-4 Class A converters are for use with Gamewell-FCI® Flex 404 4-zone fire alarm control panels (FACPs).
CAP-GW Alerting Gateway is CAP Gateway Includes circuit board and surge suppressor with ethernet network cable required for TCP connection with CAP Gateway
CB-1 Chassis Bridge provides a bridge between CHS series chassis.
CB500 wiring barriers are used to separate power-limited and nonpower-limited wiring inside of junction boxes.
CHS-4L chassis are for use with NOTIFIER® fire alarm control panels (FACPs). They are low-profile, 4-position chassis and mount two AA-30 amplifiers.
CHS-BH/BH1 is optional battery holder. The CHS-BH/BH1 battery chassis will hold two 12.0 AH batteries, and mounts on the left side of the chassis.
CO capsule for multi-stimulus detector tester 805551
CO detector replacement plate to cover the footprint of previously installed detectors.
CO1224 carbon monoxide (CO) detectors with Real Test® use a highly accurate and reliable electrochemical sensing cell to provide an early warning of dangerous CO levels.
Carrying bag for test equipment
Ceiling Loudspeaker is a cost-competitive ceiling loudspeaker which has an excellent audio performance and aesthetic appealing enclosure. This full range loudspeaker features a high sound pressure level and a wide frequency response range.
The SENS-RDR utilizes infrared technology to read the sensitivity of i3 and 100 Series conventional detectors.
The DAA2 series amplifiers are multi-featured digital audio amplifiers capable of playing up to two of 8 channels of digital audio & can play up to two different messages simultaneously with the optional BDA amplifier.
DCOIL remote test coils are required for older DNR(W) duct detector housings.
The System Sensor DH400OE-1 is a steel enclosure for mounting a standard indoor rated duct smoke detector outdoors.
M200E-DIN provides a DIN rail mounting option for one module of addressable Honeywell Morley-IAS and Notifier series modules.
DP-51050 dress panels are for use with Fire-Lite® MS-5UD/MS-10UD Series fire alarm control panels (FACPs). They restrict access to the system wiring but allow access to the membrane switch panel.
The DS-AMP by Notifier is a digital series system that provides bulk amplification to a Digital Voice Command (DVC) system.
The DVC Series Dress Panels by NotifierR are part of Digital Voice Command or DVC.These dress panels play the role of mounting the DVC with CA-1 chassis when CMIC-1 microphone is not used.
The NotifierR's DVC series brings Firefighter's Telephone Handsets which are a part of Digital Voice Command (DVC) and are used when the DVC is mounted with CA-2 , two tier chassis.
Detector test magnets simplify detector testing and maintenance
The Digital Series Distribution Boards have been designed to provide bulk amplification capability to the Digital Voice Command (DVC) system while retaining digital audio distribution capabilities.
DVC Digital Voice Command combines the capabilities of a powerful digital audio processor, an event-driven audio message generator, and a router.
Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators.
DPA-1 is the Dress panel that can be used with the CA-1 chassis when configured with a DVC, DVC-KD, and CMIC-1.
Single Terminal Back Boxes are used for mounting RTS151 key. Remote annunciator accessories providing reset function and has a Red LED to indicate alarm conditions.
System Sensor Bases that are intended for use with ECO1000 Series detectors.
The ECO1002 multi-criteria detector uses a state-of-the-art optical chamber and a thermal element combined with a microprocessor, running sophisticated algorithms to provide quick and accurate detection of fires.
ECO1003 optical smoke sensors use state-of-the-art optical chambers combined with application-specific integrated circuits (ASIC) to provide quick and accurate detection of fires.
Honeywell Life Safety Group Gamewell-FCI is a 625K bits per second ARCNET communications using wire, fiber, or mixed configurations for installation flexibility in the fire systems industry for commercial and industrial applications worldwide.
Use an End-of-Line device with control panel releasing circuits.
Multi-voltage conventional relays are used for high-current switching applications such as fan and damper assembly control, door control, air handling unit controls, and other types of system interfacing.
End-of-line (EOL) resistors are sold in packs of 10 and are available in 4.7 or 47K Ohm.
NOTIFIER's intelligent addressable control module provides supervised monitoring of wiring to load devices that require an external power supply to operate, such as solenoids, sounders, strobes, or bells.
The FCM-1-REL Releasing Control Modules are specifically designed for fire suppression releasing applications in FlashScan® systems. Power to the release agent solenoid(s) runs through the module for full-time monitoring and supervision.
FHS firefighter handsets are used to communicate over the telephone circuit and allow simultaneous operation of up to 10 firefighter remote handsets when connected to the firefighter telephone systems (NFC-FFT and ECC-FFT).
FHSC firefighter handset cabinets are available in recessed and surface-mount configurations.
FM Series electromagnetic door holders are designed for virtually any remote door release application. They are primarily used to hold fire and smoke barrier doors open until released by a remote smoke detector or other switching device.
FM Series electromagnetic door holder by Fire-Lite are designed for virtually any remote door release application. They are primarily used to hold fire and smoke barrier doors open until released by a remote smoke detector or other switching device.
FM-Series electromagnetic door holder spacers are used, when necessary, for the installation of remote door release systems.
FMM-4-20 Analog Input Module allows the NFS2-3030 fire alarm control panel (FACP) to monitor industry-standard, linear-scale, 4–20 mA protocol sensors.
Honeywell's FireLite Alarms Firefighter Phone Jacks are used to mount to a single-gang electrical box. All circuits are power-limited and supervised.
FS20X Flame Detector
FS24X Flame Detector
The NOTIFIERÂ® FSP-951 Series intelligent plug-in smoke detectors are designed for both performance and aesthetics, and are direct replacements for the FSP-851 Series.
FSP-951 Smoke Detectors intelligently designed for both performance and aesthetics with new modern, sleek, contemporary design
Notifier FST-951 Series intelligent thermal detectors are designed for both performance and aesthetics. These thermal detectors provide effective, intelligent property protection in a variety of applications.
FSX™ fire and flame detectors sense the WideBand IR™ radiant energy of blackbody particulate and molecular emissions generated by both hydrocarbon and nonhydrocarbon flames and fires.
FW-RM SWIFT® wireless relay modules allow the control panel to switch contacts by code command. The relay contains an isolated set of Form C contacts, which operate as an SPDT switch.
FWD-200 SWIFT® Wireless Detectors provide secure, reliable communication to the Fire alarm Control Panel across redundant communication mesh network
The Notifier ISO-X(A) Fault Isolator Module is used with Notifier Onyx and CLIP series Fire Alarm Control Panels (FACPs) to protect the system against wire-to-wire short circuits on the SLC loops.
VSP 850 in-line filters provide Xtralis® customers the ability to address a wide array of harsh environments with high levels of airborne contaminants in a simple and cost-effective manner.
XRM optional transformers are designed for use with Fire-Lite® fire alarm control panels.
The trim rings are designed for semi-flush mounting applications, and intended for use with BG-12 Series fire alarm pull stations.
Fire detector protective cover helps prevent malicious or accidental false fire alarms. This unique device has helped prevent false fire alarms around the world for decades.
Ceiling Loudspeaker gives desired interior compatibility for a better match with environments, ceiling loudspeaker features a high sound pressure level and a wide frequency response range, ensuring flawless acoustic performance.
Fire-Watch 411 Series digital alarm communicator transmitter (DACT) handheld programmers are digital devices used to locally program NOTIFIER® 411 Series DACTs.
FireWarden® ZNAC-92 Class A converter modules convert four Style Y (Class B) NACs to four Style Z (Class A) circuits.
ASD SITE LIC PRIMARY KIT VSM4
TR-1 trim ring assemblies are for use with Gamewell-FCI® Flex 4-zone fire alarm control panels (FACPs). They allow semi-flush mounting of the cabinet. Red and black options are available.
TR-CE trim ring assemblies are for use with Gamewell-FCI® Flex six-zone fire alarm control panels (FACPs). They allow semi-flush mounting of the cabinet. Red and black options are available.
The D4 Series Cabinets are designed to house the Gamewell-FCI’s, E3 Series® Classic Emergency Voice Evacuation AA Series amplifiers and Honeywell Power Products’ Chassis Power Supplies. These cabinets are constructed from 16-gauge steel.
Graphic Annunciator Dress Plates are used when the 10" graphic display is mounted in the top row/except top row of a CAB-4 Series cabinet.
The Hardware Interface is used for universal zone coder.
Sampling Hole Clips are designed to alleviate such potential issues, by providing a clear, visual indication of sampling point location and its associated hole size.
X-NRI/EN Network Resource Interfaces are universal interface of X-618 for external control access and audio extension. It is suitable to the needs of central interfaces management required by middle-to-large applications.
The Notifier’s IPCHSKIT is a IP Communicator Chassis Mounting Kit. For mounting an IPDACT-2/2UD onto the panel chassis or CHS-4 series chassis. Use IPENC for external mounting applications.
IPDACT IP communicators are designed to transmit fire alarm system information to central monitoring stations over any standard IP network.
IPDACT serial programming cables can transfer data in a snap and have DB9/RJ45 ports for instant connectivity.
IPDACT Series Mounting bracket kits are for use with NOTIFIER® IPDACT Series IP communicators. The kits consist of screws and battery shield with standoffs.
IPSPLT splitters allow connection of both panel dialer outputs to one cable input to the internet protocol digital alarm communicators/transmitters (IPDACT).
ISO-6 six fault isolator modules provide six equivalent circuits that will allow a portion of the communications loop to continue operating when a short circuit occurs on that loop.
In-Line Filter Elements provide to customers the ability to address a wide array of harsh environments with high levels of airborne contaminants in a simple and cost-effective manner.
Inline flow restrictor assembly used for refrigerated storage sampling kit. The Xtralis refrigerated storage sampling kit provides a standardised method of smoke sampling for Refrigerated Storage facilities.
2D51 duct smoke detectors are low-profile photoelectric detectors designed for special applications, specifically for use in no-flow or low-flow air-handling systems (0 to 4,000 FPM).
InnovairFlex™ 4-wire photoelectric duct smoke detectors offer 2 sensors to 1 powerboard capability in standard (D4120) and watertight (D4120W) versions.
InnovairFlex™ 2-wire photoelectric duct smoke detectors sense airflow at speeds ranging from 100 to 4,000 ft/min.
The InnovairFlex™ Series are the only duct smoke detectors flexible enough to fit configurations from square to rectangular and everything in between.
InnovairFlex™ duct smoke detectors combine an impressive collection of innovations designed to save you time and money and provide the flexibility you need in the field.
Installation/removal tools are designed for use with System Sensor® plug-in smoke detectors. They permit installation and removal of detectors in elevated mounting locations.
The NFS-320 intelligent Fire Alarm Control Panel is part of the ONYX® Series of Fire Alarm Controls from notifire.using NFS-320C, an optional ACM Series annunciator can be mounted in the same cabinet.
The DP-CFFT is a dress Plate for CFFT-1, it has one open position for mounting an ACS annunciator or a BMP-1 Blank Module Plate.
Intelligent Detector Color Kits are designed for use with NOTIFIER® intelligent detectors.
Notifier FSP-951 Series intelligent plug-in smoke detectors are designed for both performance and aesthetics.
IPENC external enclosures are for use with NOTIFIER® IPDACT internet monitoring modules. Includes IPBRKT mounting bracket. Red and black options are available.
Intevio extension keypads are for use with remote call stations. Models available with four function buttons/LED indicators, and eight function buttons/LED indicators.
KILLARK® XAL-53 explosion-proof pull stations are suitable for use in hazardous areas due to the presence of flammable gases or vapors, combustible dust, or easily ignitable fibers.
L-PBM20A bi-directional projection loudspeakers are high-performance, 20W public address speakers. They offer a broad frequency response range, low distortion, and a high sound pressure level.
L-PCP ceiling loudspeakers are powerful ceiling mounted speakers. They are specially designed for environments, such as shops, supermarkets, educational institutes, offices, sports fields, hotels, restaurants, and wet environments.
L-PWP public address cabinet loudspeakers are intended for use in general indoor and outdoor applications.
L-Series bezel kits enable installers to easily turn any L-Series fire or plain device into a device that meets ECN/MNS requirements.
L-Series strobes are rich with features guaranteed to cut installation times with its lower current draw and modern aesthetics.
L-Series selectable output chimes are private mode notification appliances used to alert trained personnel to investigate possible emergency situations.
L-Series color lenses come in four colors options: amber, blue, green, and red. The lenses are compatible with L-Series strobes including wall- or ceiling-mount.
L-Series horns are designed to simplify installations to provide primary and secondary signaling for fire and security applications.
L-Series trim rings provide additional space within the backbox. The design is universal across the L-series notification appliance line and supports indoor horns, horn strobes, chimes, chime strobes, strobes, speakers, and speaker strobes.
L-Series universal expander plates cut costs and speed installation on emergency communications applications that require fire and emergency warnings by combining the functions of multiple devices on a single mounting plate and backbox.
LDM-Cables are ribbon cable sets which provide connection between LDM-32/LDM-E32 and LEDs or lamps on a custom graphic panel.
LED Annunciator Module with alarm (red) indicators is used for up to 30 input zones or addressable points. N-ANN-RLED has red LEDs only for alarm communication.
The LED Array Series Indoor Displays are LED message centers designed for light industrial, commercial, and office use. They quickly display large amounts of information in eight colors and three rainbow effects.
LM2-PCP06x modular ceiling loudspeakers are 6W economic speakers.
The LDM Series lamp driver modules with a custom graphic display, provides annunciation and control for Fire Lite’s intelligent fire alarm control panels
The Lamp Driver Module with a custom graphic array used to indicate point status and, in some versions, to control the state of output points
The lamp driver relay modules are used to provide 32 dry-contact relays for electrical isolation when connecting the system to other equipment.
LCD-160 is a 640-character Liquid Crystal Display (LCD) annunciator and remote control for the NOTIFIER NFS-3030/NFS2-3030
The 24inch long cable used to connect SCS-8L/SCE-8L outputs to lamps or LEDs.
M200 Addressable Modules Mounting Box with 20mm knockouts, consists of white plastic back and a black transparent cover.
MNS Indoor Display's are LED message centers designed for light industrial, commercial and office use
The MegaDot Display offers message clarity from a 200 ft. (61 m) distance allowing you to visually connect with your employees or customers. the MegaDot uses 10.2cm tall characters for dazzling, moving colour messages you know everyone will notice
The DST family of sampling tubes are pieces of steel piping with a series of holes drilled the entire length of the tube and should extend the entire width of the duct.
VESDA-E VEA Microbore Tube Cutter are used for cutting microbore tubes.
Midas® Gas Detector
The Mounting Base is required to meet local code and application requirements and for that System Sensor offers standard 4in and 6in bases.
Multi-Stimulus Detector Tester TF 2001
Multi-voltage conventional relays are used for high-current switching applications such as fans and damper assembly controls, door controls, air handling unit controls, and other types of system interfacing.
The N-ANN-80 annunciator is a compact, backlit, 80-character LCD fire annunciator that mimics the Fire Alarm Control Panel (FACP) display. It provides system status indicators for AC Power
The N-ANN-LED annunciator module provides LED annunciation of general system faults and input zones/points when used with a compatible Fire Alarm Control Panel (FACP).
NBG-12 Series fire alarm pull stations are designed to meet multiple applications with the installer and end user in mind.
Notifier Retrofit Mounting Kit is used for mounting the NCA-2 Network Control Annunciator to a DPDISP dress plate.
Network Control Display requires a network communications module for networking. In direct connect applications, the NCM is not required.
Replacement door used for mounting ACPS-610 (E) in a CAB-PS1 cabinet when replacing ACPS-2406
Non Scanner Relay Processor Module (DRP) is required if remote relays are not used with display.
The backbox has been engineered to provide ease-of-entry for the installation of the fire alarm control panels.
The Battery Plate used to cover battery and power supply when lower position is used in backbox.
Notifier CMIC-1 Fire Alarm System Chassis With Paging Microphone, By Honeywell Is A Black Paging Microphone
The CMIC-RP by Honeywell is a microphone and microphone well. It is used to create a small wall-mounted remote paging station with control functions.
Notifier Digital Audio Amplifier With Fiber Option Module, DVC Audio Loop, Backup Alarm, Multi-Featured Amplifiers That Provide An Economical Alternative For Applications That Do Not Require All Of The Features Of DAA2 or DAA Series Amplifiers
Dress panel is used with CA-1 chassis when the CMIC-1 is not used. It Provides mounting options on right two bays for two ACS annunciators, or for blank plates.
The N-ANN-I/O is an LED driver module that can be used for various applications including as an interface with the Fire Alarm Control Panel to drive most customized graphic annunciators.
TR-ABS is a Back Boxes which provide an enclosure for remote mounting it can be surface or semi flush mounted.
Deluge-Preaction Control Panel includes backbox, power supply, technical manual, and a frame. The RP-2001 is a six-zone FACP for single and dual hazard deluge and preaction applications.
The Agent Release Control Panel RP-2002 is a six-zone FACP for single and dual hazard agent releasing applications. The RP-2002 provides reliable fire detection, signaling and protection for commercial, industrial and institutional buildings.
The Notifier relay modules provides 10 programmable form-C relays when used with a compatible FACP (Fire Alarm Control Panel).
The Notifier XP6-R six-relay control modules provides a fire alarm system with six Form-C relays. It intelligent, addressable multiple input and output modules are a convenient space saving platform and allow for additional mounting options.
The BRKG-B Breakglass Insert Includes a tempered glass plate, a hammer attached to a chain, and a screw to attach the hammer to the trim ring.
NOTIFIER’s XP6-MA six-zone interface module provides an interface between the intelligent alarm system and a two-wire conventional detection zone.
The CFFT-1 Chassis for Firefighters’ Telephone mounts in the row directly under a DVC that is mounted in a CA-1 single row chassis.
The NotifierR DVC Chassis are audio chassis that are a part of NotifierR DVC or Digital Voice Command series. They play a role in providing a base for installing the DVC and can be mounted into size 'B' , 'C' or 'D' CAB-4 Series cabinet.
ONYX FirstVision™ backbox enclosure and door is used for perfect and secure mounting of ONYX FirstVision™ Interactive Firefighters’ Display system.
ONYX FirstVision™ Interactive Firefighters’ Display graphically displays critical information on the origin and spread of a fire, allowing firefighters to quickly locate and extinguish it.
Backbox by Notifier has been engineered to provide ease-of entry for the installer.
Fire Systems Command Interface by Honeywell is the next generation in life safety management for centralized control and monitoring of the fire alarm system.
ONYXWorks Fire Systems Command Interface is the next generation in life safety management for centralized control and monitoring of the fire alarm system
OSE-HP-01 OSID high power emitters are battery powered and interact with an OSID imager to provide early warning smoke detection.
OSE-RBA spare alkaline battery packs are intended for use with the open-area smoke imaging detection (OSID) devices.
OSID beam detector FTDI cables allow connection of a PC with OSID diagnostic software to the imager.
OSID wire guards are steel cages designed to protect OSID imagers and emitters from vandalism and accidental damage. The cages are constructed of heavy gauge steel wire with a corrosion-resistant polyester coating.
OSID environmental housings protect OSID imagers and emitters from dust and water ingress in industrial environments. The glazed housings are made of ABS and the glass windows cause minimal attenuation of the UV and IR beams.
Installation kits for OSID detectors include a laser alignment tool, a test filter, a PC cable, a cleaning cloth, and a manual.
OSP-002 laser alignment tools allow for quick alignment of OSID detectors. They also align and lock the eyeball and activate the emitters when locked.
OSP-003 acrylic test filters are intended for use with OSID detectors.
Open-area smoke imaging detection emitters (OSIDs) are a new innovation in projected beam smoke detection technology using advanced dual wavelength projected beams and optical imaging technology for early warning smoke detection.
BB-XP is an Optional cabinet for one or two modules.
P40-KITB Mounting Assembly includes chassis, hinged dress plate, two BMP-1 blank plates, and mounting hardware.
PAM multi-voltage relay modules are ideal for applications where remote relays are required for control or status feedback.
Flush Sample Point Head only for 10 mm OD tube.
PRT/PK programming cables are for interfacing compatible Fire-Lite® devices with a printer or Windows™ based PC.
Power Amplifier RK-AMP500
Protective Cover for Manual Call Points is Protective housing with protruding roof edge, for all detector housing for increased mechanical protection as well as for protection from bad weather conditions.
RK-MCU INTEVIO master control units are the central management device of the INTEVIO PA/VA system, which is used to manage and monitor all devices and perform various operations.
RK-MIC remote call stations are used to perform various broadcasts and live announcement in zones.
RPT repeaters are used to extend the distance of transmission and change media type between wire and fiber. They mount in the ABS-8R surface box using one slot of the CHS-4.
Reversing relay and synchronization modules enhance the operation of 2- and 4-wire i³™ Series detectors equipped with a sounder.
Surface-mount backboxes are for use with Fire-Lite® ACM-8RF relay modules.
The Remote annunciator mounts on a standard single gang box, and provide LED indication of the same functions as the 4XZM zone relay module.
Remote annunciators are designed for both conventional and intelligent applications. Their red LED provides visual indication of an alarm condition.
Remote Display Module is designed for use with the Laser compact range and it provides real-time indication of the status of a VESDA detector.
Remote display modules accessories are used in VESDA® VLI early warning aspirating smoke detection systems.
The RM-1 Series remote microphones can be utilized with the DVC Digital Voice Command Centre and DAA2 amplifiers, or to expand a legacy installation.
Remote Mount Display Modules provides real-time indication of the status of a VESDA detector.
Remote Mount Display without Relay is a VESDA Laser Industrial (VLI) remote display module containing high-intensity, flashing Alarm light-emitting diodes (LEDs).
Remote Scan display provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators.
Remote VESDA VLC Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators.
VESDAnet sockets interface are required when a standard unit is used to provide a flexible solution where permanent mounting is not required in this case VESDAnet sockets connects the HLI onto the VESDAnet network.
B401 plug-in detector bases are used with System Sensor® conventional S300 smoke and heat detectors. These bases make detectors more versatile than equivalent direct-wired models.
SB-I/O surface-mount backboxes are for use with Silent Knight® PS-SA and PS-DA pull stations.
SB-10 surface backboxes are for use with Fire-Lite® BG-12LR agent release stations.
SCS-8 Smoke Control Station by Honeywell are used with the Notifier NFS2-3030 panel or the NCA-2 network annunciator for Firefighter's Smoke Control Station (FSCS) applications.
The SFP-10UD is a 10-zone control panel with built-in communicators provides reliable fire signaling protection for small to medium-sized applications.
Notifier SFP-2402 and SFP-2402E Fire Alarm Control Panels (FACPs) bring the latest in microprocessor technology to conventional fire controls.
Notifier Fire Alarm Control Panel by Honeywell brings a range of fire alarm control panel with latest microprocessor technology to conventional fire controls.
Five zone fire alarm control panels provide reliable fire signaling protection for small to medium-sized commercial, industrial, and institutional buildings.
SMB600 flanged surface mounting kits may be used with certain System Sensor® smoke detectors when flush or recessed mounting are not possible.
The Notifier SP-4 features four messages Fire, Weather, Announcement and Evacuate.
SP-2B MNS Announcement Evacuate sign is slim 2-1/2 deep box is made of steel, is painted white and is designed for surface mounting. The messages are printed in clear within a black box on clear film.
SSM Series alarm bells are low-current, high-decibel notification appliances for use in fire and burglary systems or other signaling applications.
The STI is an accessories that are been used with STI Stopper II®. The accessories that are been used are conduit gasket and conduit spacer.
Wireless detectors are intelligent (addressable) detectors provide secure, reliable communication to the Fire Alarm Control Panel (FACP) across a Class A mesh network.
W-SYNC SWIFT® wireless synchronization modules provide audio and visual synchronization between SWIFT® notification appliances and System Sensor® wired notification appliances, supporting the integrated wired/wireless solution.
Sampling Hole Clip delivers reliable and accurate sampling hole sizes that are fast to install and easy to locate and identify.
Banderoles to mark the suction points
Scanner Relay Processor Module (DRP) is required if remote relays are not used with display.
Seismic Mounting and Bracket Kit
Sensepoint XCD Calibration Kits are specially designed for monitoring gases along with Honeywell Analytics' sensors in potentially hazardeous or explosive atmosphere.
Sensepoint XCD RTD
The N-ANN-S/PG Interface module connects either a serial or parallel printer with a compatible Fire Alarm Control Panel (FACP) to print real-time logs of system events, detector status reports, and event histories.
Replacement dust covers are for use with System Sensor® 100/200 Series smoke detectors.
NOTIFIER’s FS-OSI-RI intelligent addressable reflector-type linear optical beam smoke detector is uniquely suited for protecting large open areas with high ceilings, where spot-type smoke detectors are difficult to install and maintain.
The Fire-Watch 411 series from Fire-Lite Alarms are compact slave Digital Alarm Communicator Transmitters (DACTs) that are designed for a variety of fire, and non-fire applications.
The SCS-8 Smoke Control Station, SCS-8L Smoke Control Lamp Driver are used with the NOTIFIER AM2020/AFP1010, NFS-640, NFS-3030, NFS2- 3030 Fire Alarm Control Panels
Smoke detector tester
Spare Plastic Front cover for VES-A00-P smoke detector. It has LEDs in it for indication.
SpectrAlert® Advance color lens attachments are easy to install to any indoor or outdoor SpectrAlert® Advance strobe devices to provide distinctive visual signaling.
SpectrAlert® Advance horn strobes include a variety of features that increase application flexibility and simplify installation.
SpectrAlert® Advance 4-wire horn strobes include a variety of features that increase application flexibility and simplify installation.
SpectrAlert® Advance strobes include a variety of features that increase application flexibility and simplify installation, such as field-selectable settings, including candela, and automatic selection of 12 or 24V operation.
Step Up Transformers are required for 70VRMS configuration of DS-AMP/E and DS-BDA.
Surface backboxes are for use with Fire-Lite® BG-12LR agent release stations.
System Sensor BEAMSMK are the surface mounting kit for the reflective projected beam smoke detector which are used whenever surface wiring is being used.
System relay modules provides remote termination card with new software supplied in a remote mounting box and it allows reporting of any alarm or fault condition that appears on a VESDAnet loop regardless of the initiating zone.
The Tamper Proof Sampling Points (TPSP) provide an elegant addition to modern decor and can both minimize the risk of vandalism and tolerate abuse.
Test head for heat detector together with battery & charger
Notifire offers “C” size trim ring for the cab-4 or cab-3 series cabinets.
Trim Ring Accessory includes a semi-flush-mount trim ring which is two tiers.
Trim ring for the NFS-320 intelligent addressable fire alarm control panel cabinet.
Turn latch locks are for use with Silent Knight® EVS-LOC local operator consoles. They are not intended for UL installations.
Unidirectional projection loudspeakers are high-performance, 10W or 20W public address speakers.
Universal digital alarm communicator transmitters are designed for use with NOTIFIER® fire alarm control panels (including legacy panels). These transmitters can be installed in the panel cabinet or remotely in a separate enclosure.
VSP-972 filters are spare filters for use with VEA aspirating smoke detectors.
The VSP-976 is a display front panel for VESDA-E VEA series of smoke detectors.
Xtralis spare front cover is use with the VESDA-E VES & VESDA-E VEP Aspirating Smoke Detector. It consist of plastic with 3.5in Display size.
VESDA VRT-500 is a Remote Mount Relay Module. It is designed for use with VLP, VLS and VLC detectors. The relay module is a 7 relay remote termination card with specialized software.
Xtralis the manufacturer of the market leading VESDA Aspirating Smoke Detection (ASD) technology has developed with its sister company
VESDA Sensepoints XCL are Micro Bore ASD System gas detectors come complete with the main detector unit (pre- installed with sensor cartridge), two cable glands, calibration/flow cap, flexible tube and tube clips to connect to VEA tubing.
VESDA Sensepoint XCL Micro Bore provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats.
VESDA Sensepoint XCL Replacement Filter
Replacement Sensor for VESDA Sensepoint XCL Detectors.
XCL-XRL-SC-H2 is a VESDA Sensepoint XCL/XRL replacement gas sensor for hydrogen gas.
Standard sampling points are designed for a ceiling with a void where micro bore tubes are run in the void and sampling points are mounted in the ceiling.
VESDA VIC Multi-function Control Cards are interface cards for the range of Xtralis VESDA VIC smoke detectors. They expands the range of input and output communications.
VESDA VLF remote display modules provide real-time indication of the status of a VESDA detector.
The VLI detector combines a fail-safe Intelligent Filter (patent pending) with an advanced clean-air barrier for optics protection allowing the use of absolute detection and a long detection chamber life without the need for recalibration.
VESDA Pipe and Fittings are part of an integrated system manufacturedfrom specialty plastics designed for use with most aspirating smoke detectionsystems, the VESDA VLP system in particular
The VRT-600 is a Remote Mount Display Module designed for use with the Laser PLUS range. Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display..
VSP-960 is used as a mounting bracket for VESDA-E.
VESDA-E Sampling Module
VESDA-E Series aspirator
VESDA-E Smoke Detection Chamber
The VESDA-E VEA series of detectors combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.
VESDA-E FRT COVER VEA-040-A00
VESDA-E VEA RA joiners are right angle joiners for VESDA-E VEA microbore tubes. They come in packs of 10.
VESDA-E VEA sampling point and microbore tube is fully supervised by the detector. VEA sampling points are available in two different type standard and surface mount. It can be used in Healthcare, Offices and Electrical cabinets.
VESDA-E VEA-40 Mounting Bracket is an accessory for VESDA-E VEA Local Relay StaX.
The VSP-971 are the smoke sensor modules for the VESPA-E VEA-40. The VESDA-E VEA series of aspirated detectors combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options.
VESDA® LCD Programmers are menu-driven, allowing the user to conveniently configure, commission, and maintain a VESDA aspirating smoke detection system, as well as program each individual detector.
VESDA® Modbus type 3 HLIs act as a proxy for all VESDA devices on the VESDAnet™ network, providing access to rich status information available from VESDA detectors, as well as the ability to control and configure these devices.
VESDA® pipes and fittings make up a network of dependable specialty piping that constantly and efficiently carries air samples from protected zones to highly sensitive detectors.
VESDA® VPS100/300 and power supplies are capable of providing operating power, including battery backup, for the entire line of VESDA by Xtralis® aspirating smoke detectors.
VESDA® filter cartridges are used to replace filter cartridges in VESDA VLC, VLF, VLP, and VLS detectors.
VP-CLIP 3/4-inch pipe support clamps are designed for use with VESDA® pipes. They are required for each five foot length of pipe.
VSP-030 filters are for use with VESDA® VLI intelligent detectors.
VLI Secondary Foam Filter is an Internal secondary filter spare part for VESDA VLI.
VESDA SCREW COVER PK2
VPS-300US Power Supply provides power for: up to 3 VESDA VLP or Laser SCANNER detectors, or up to 15 remote (single box) units, or up to 3 sub rack assemblies.
Remote Mount Configuration is used for VESDA Display Unit
The VSM4 software product are valuable revenue generator for Xtralis distributors.
VSP-877 flush-mount sampling points provide a functionally and aesthetically improved alternative to the conical sampling points used in Xtralis® aspirating smoke detection (ASD) pipe networks.
Vesda Remote Mount Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators
VRT-900 includes blank plates with a remote mounting box and has 12 relay version for VLS.The Remote Box can house a single module with a termination card.
Vesda Test Transformers are previously known as the Hot Wire Test Power Supply Unit. They are used to test very early warning aspirated smoke detection equipment.
Pipe – 3⁄4”
The Visor ALARM® PLUS Receiver from Teldat™ is solution to manage and receive alarms from the Fire Watch™ IP series fire alarm communicators or Talgat's MIP™ IP communicators. Each Visor ALARM PLUS receiver supports up to 3,000 alarm panels.
WTP weatherproof plates enable installers to flush-mount outdoor horns, strobes, horn strobes, speakers, and speaker strobes to a variety of wall surfaces, including brick, ceramic tile, concrete, and masonry brick.
The wall-mounted cabinet for the DVCRPU has a door that provides a clear view of the interior, and is hinged downward to provide unimpeded user access from any direction.
The X-SMART System Management Software includes a server-side system resource platform and a client-side management system to perform centralized management of related devices through an Ethernet network.
X-DA High Efficiency Power Amplifiers are the Class-D amplifiers and they are lighter, more stable, and high efficiency. The audio transmission is completely digitalized which makes it free from interference and easy to be controlled
The sensor covers are spares designed for VESDA Sensepoint XCL Micro Bore ASD System gas detectors.
NOTIFIER’s XP6-C is six circuit supervised control module which provides intelligent alarm systems with supervised monitoring of wiring to load devices that require an external power supply to operate such as horns, strobes or bells.
Metric to Imperial Pipe Adaptors, Kit
Xtralis Smoke detector is an interface card for the range of Xtralis VESDA VLF smoke detectors. Multi-function Control Card expands the range of input and output communications a VLF detector can perform.
VEA provides assured detection through active sampling and end to end system integrity monitoring.
Honeywell's Xtralis Tamper Proof Sampling Points are a part of Aspiring Smoke Detection. They can minimize the risk of vandalism and tolerate abuse.
Xtralis VESDA Smoke Detection System Module allows direct access to all VESDAnet deviceson an VESDA smoke detection system.
The VESDA-E VEA Microbore tubes are custom made, high quality plenum rated flame retardant polyethylene tubes that are reliable long-term performance. They are lightweight and flexible for easy handling and installation.
The VESDA-E VEA series of detectors are used for early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.
Zone Expander RK-ZONE8
The System Sensor A77-AB adapter rings allow installers to retrofit i³™ Series detectors where a larger diameter smoke detector was previously installed.
i³™ Series offers conventional smoke detectors with sounder, relay and isolator features included.
Start your search with category name, product name, part number, etc.
Copyright © 2023 Honeywell International Inc.