Micro processed 12-zone fire detection control panel incorporates source supply of 2 supervised siren outputs, general alarm relay, general fault relay, general indicators and provides digital input for remote reset,
Central Processing Unit series are used for NFS2-640 Intelligent Fire Alarm Control Panel. Central Processing Unit is provided with integral 1.5A power supply.
The ID3000 is a flexible, modular control panel, built from various option modules. Each module is supplied with required mounting screws, connection cables, washers etc. and installation instructions.
Central Extinguishing Unit as system status indicator LEDs and a display with two digits of the operating time discharge.
The Morley-IAS DX Connexion panel is ideally suited for use in the protection of small to medium sized buildings.
Morley-IAS Fire Alarm Control Panel has qualities of reliability, flexibility and value with advanced features and intuitive functionality.
The DX Connexion is an enhancement of the Morley-IAS Dimension panel range. The DX Connexion Panel series also include the modular unit PCB and Base Card.
The ESS-2Plus fire alarm control Panel can support an unlimited number of manual call points and a limited number of detectors by zone according to the limits of design and installation standards that are applicable.
THe FACP FlexES Control M is a modular loop technology fire alarm and control panel designed to monitor and alarm small to very large sized premises.
THe FACP IQ8Control C is a loop technology fire alarm and control panel designed to monitor and alarm small to medium sized premises.
THe FACP IQ8Control M is a loop technology fire alarm and control panel designed to monitor and alarm medium to large sized premises.
Microprocessor-controlled fire brigade display panel acts as an additional display device for a FlexES fire alarm control panel. Serial connection to the fire alarm control panel is via RS485 interface.
The VS-SPARE-24 are Replacement Spares Pack for Vigilon Control Panels - VIGPLUS-24 & VIGPLUS-72.
Gent VIGPLUS-24 1 To 4 Loop Control Panel With 1 Loop Card, By Honeywell. The Control Panel Continuously Monitor Devices That Are Connected To Each Device Loop.
HMI Control Card FACP 8000 / IQ 8 Control With Switch-mate.
Horizon Conventional Fire Alarm Control Panels are a reliable fire alarm detection solution that have been equipped with configurable class change inputs, coincidence detection and programmable delays.
The Intelligent Addressable Fire Alarm System modular can be configured with just a few devices for small building applications, or networked with many devices to protect a large campus or a high-rise office block.
Honeywell provides marine onyx systems filter kits for Notifier’s marine-approved fire alarm systems.
Morley-IAS DXc Expansion Mimic PCB Includes Silence Sounders, 2 Level Access Key, Allows Geographic ‘Floor Map’ Zonal Indicators To Be Built For Situations Where Increased Clarity Of The Fire Location
The NFS-320 intelligent Fire Alarm Control Panel is part of the ONYX® Series of Fire Alarm Controls from NOTIFIER.
NFS2-3030 is an intelligent Fire Alarm Control Panel (FACP) designed for medium- to large-scale facilities. CPU2-3030ND is one of the main component of this system. It is also known as display of the system.
Nano is a single loop analogue addressable panel with an intuitive user interface and attractive appearance delivering an experience that makes the fire alarm system easy to use and safe to operate.
Deluge-Preaction Control Panel includes backbox, power supply, technical manual, and a frame. The RP-2001 is a six-zone FACP for single and dual hazard deluge and preaction applications.
The Agent Release Control Panel RP-2002 is a six-zone FACP for single and dual hazard agent releasing applications. The RP-2002 provides reliable fire detection, signaling and protection for commercial, industrial and institutional buildings.
The Notifier intelligent Fire Alarm Control Panel is part of the ONYX® Series of Fire Alarm Controls as a stand-alone small-to-large system, or as a large network, the ONYX Series of products meet virtually every application requirement.
Rack mounting Heavy Duty Drawer with PSU
Redundant control module for FlexES Control
The SFP-10UD is a 10-zone control panel with built-in communicators provides reliable fire signaling protection for small to medium-sized applications.
Notifier SFP-2402 and SFP-2402E Fire Alarm Control Panels (FACPs) bring the latest in microprocessor technology to conventional fire controls.
Notifier Fire Alarm Control Panel by Honeywell brings a range of fire alarm control panel with latest microprocessor technology to conventional fire controls.
Five zone fire alarm control panels provide reliable fire signaling protection for small to medium-sized commercial, industrial, and institutional buildings.
The SCS-8 Smoke Control Station, SCS-8L Smoke Control Lamp Driver are used with the NOTIFIER AM2020/AFP1010, NFS-640, NFS-3030, NFS2- 3030 Fire Alarm Control Panels
System Sensor Fire Alarm Control Panels are developed to provide a simple and reliable solution to meet the demands of today’s fire detection requirements. It is also been designed to meet the requirements of both installer and end user.
Replacement Main Control Board (MCB) is a spare replacement part for the Nano panel.
VLI laser chamber assembly suitable for VLI only
Conventional Control Panels with 4 zones has been conceived and designed for the installation of small and medium-sized fire detection systems in those places where it is necessary to interface with an easy and high-performance central unit.
Conventional Control Panels with 8 zones has been conceived and designed for the installation of small and medium-sized fire detection systems in those places where it is necessary to interface with an easy and high-performance central unit.
The replacement Master Repeat Cards are designed for installations into new Repeat panel or A3 Mimic panel that are wired on to a loop of an analogue and addressable fire detection and alarm systems.
Vigilon Plus Control Panels are accommodating up to 200 devices including advanced fire sensors, interfaces, call points, alarm sounders and visual alarms. The Compact Plus 2 loop panels are available with integrated 24 hour standby capacity.
Vigilon Plus Control Panel accomodates and controls up to 200 devices including advanced fire sensors, interfaces, call points, alarm sounders and visual alarms. They are 1 to 4 loop control panel with or without a printer.
XLS140-2 fire alarm control panels designed with modularity and for ease of system planning, the XLS140-2 panels can be configured with just a few devices for small building applications, or for a large campus or high-rise application.
The Xenex Conventional Fire Detection and Alarm system from Gent provides owners of small building premises with quality protection equipment at an economical price.
Xenex 8 Zone repeat indicator, less batteries
Spares pack for Xenex Panels
The ZXSe range of intelligent fire alarm control panels has been designed to assist with the normal operation of a fire detection system.
Start your search with category name, product name, part number, etc.
Copyright © 2023 Honeywell International Inc.