Asia Pacific
Europe
Middle East
North America
The enclosure has a glazed lockable door and an internal swing frame to allow easy access to the back of the sub rack.
The ACS-Series Annunciator and Control System provides arrays of LEDs to indicate point status, zone status, system status, and ability to perform system reset, silence, acknowledge and drill
The Dress Panel for one touchscreen display and two ACM-30 annunciators to be mounted in a CAB-5 Series cabinet
Flush-mount boxes are for use with Fire-Lite® ACS Series annunciators. These enclosures provide remote mounting of a single annunciator module.
Key lock door for recessed mount is an accessory for emergency telephone stations.
ANN-MBRLY mounting brackets are for use with NOTIFIER® NFW2-100 fire alarm control panel (FACP) applications.
Accessories are designed exclusively for IQ8Quad Series Detectors.
The ID3000 is a flexible, modular control panel, built from various option modules. Each module is supplied with required mounting screws, connection cables, washers etc. and installation instructions.
The Annunciator Flush Box-1B (black) provides for the remote mounting of a single annunciator module in a flush-mount enclosure.
Annunciator Key Switches provide access security for the control switches on the LCD-160. Key-switch kit includes key, hardware, and an annunciator label.
The Annunciator Surface Box provides for the remote mounting of one annunciator module in a surface-mount enclosure. Knockouts are provided for use with 1/ 2" (1.27 cm) conduit. The annunciator mounts directly to the ABS-1B/C without a dress plate.
The Annunciator Surface Box-2B (black) provides for the surface mounting of one ACM-24AT/AEM-24AT combination or one ACM-48A/AEM-48A combination.
B-Sized marine cabinet comes with 12 gauge steel door and 6 gauge black box. These cabinets are available with a Notifier logo.
Replacement Battery Box For Vig1-72
Blank dress panel provides dead-front panel for unused tiers; covers DAA2/DAX series or AA-series amplifier.
Blank Module Dress Plate used to cover annunciator positions or panel positions and also mounts some option modules.
Blank Module Plates by Notifier are cover unused module positions in an annunciator backbox also included four stand offs which allows option modules to mount behind the black front, or inside the cabinet.
All cabinets for NOTIFIER fire alarm control panels are fabricated from 16-gauge steel. The cabinet assembly consists of two basic parts: a backbox and a locking door.
C4 Cabinet Backbox are available in black or red. This selection provides a stylish combination to accent the décor of the finest lobby setting.
Blank plate for CA-2 chassis
Cabinet assembly consists of two basic parts a backbox and a locking door. Backbox has been engineered to offer ease-of entry for the installer. Cabinets are available in either black or red, with or without windows.
CAB-4 Series Semi-Flush-Mount Accessory Trim Rings are used for mounting accessories in Notifier's Fire Alarm Control Panel cabinet assemblies.
Notifer brings CAB-4 Series Audio Command Doors that are designed to be used with CA-2 chassis mounted in top two rows.
CAB-4 Series Cabinet for NOTIFIER fire alarm control panels are fabricated from 16-gauge steel
DR-B4 is Two Tiers, “B” Size CAB-4 Series Cabinet for NOTIFIER Fire Alarm control panels.
CB-1 Chassis Bridge provides a bridge between CHS series chassis.
CHS-4L chassis are for use with NOTIFIER® fire alarm control panels (FACPs). They are low-profile, 4-position chassis and mount two AA-30 amplifiers.
Compact 24hr inner door assembly
The DXc Blank Covers are a part of cover kits for DXc series control panels.
DXc custom key plate cover kit accessories are used to replace the blank cover supplied with the DXc2/4 control panels or used with the extension back box.
The Morley IAS DXc Flush Bezel Kit used for Morley IAS DXc2 or DXc4 panel and the kit includes additional extension back box. Extension box is used to accommodate larger batteries, relays or other equipment.
DXc replacement door is available for DXc control panels. This replacement door is fits with all three variants of the panel, DXc1, DXc2 & DXc4 and is supplied complete with display PCB, fascia label, ribbon cable and lock.
DXc1 rack mounting kit accessories are used for DXc1 one loop fire alarm control panels.
Release button for hold-open system in surface-mounted and flush-mounted versions
DPA-1 is the Dress panel that can be used with the CA-1 chassis when configured with a DVC, DVC-KD, and CMIC-1.
The Dress Panel-Display allows one to four modules to be mounted in the top row of the CAB-4 Series backbox. Modules mount directly to threaded studs on the Dress Panel.
Dummy plate is used to install fire stations DCSF12 or DCSF1 in the upright cabinets
Dummy cover for heavy-duty drawer PSU (5 HU)
EQBB backbox assemblies are for use with EQ Series cabinets. These assemblies are available in red or black and feature two, three, or four tiers.
EQDR door assemblies are for use with NOTIFIER® EQ Series cabinets. These vented doors are available in red or black, and feature two, three, or four tiers.
The BB-STD is a accessory of a System Sensor.
PW-Series remote enclosure
Expansion housing for DXc series BMZ
Honeywell FS90 Retrofit Kit for a small FS90 cabinet. Kit includes an equipment back plate, dress plate, brackets and hardware, and cabinet door with lock and key.
FS90 Retrofit Kit for a large FS90 cabinet. Kit includes an equipment back plate, dress plate, brackets and hardware, and large cabinet door with lock and key.
Fire System Document boxes are designed to complement any life safety system. The robust, lockable steel enclosure offers safe storage and fast access to essential documentation.
TR-CE trim ring assemblies are for use with Gamewell-FCI® Flex six-zone fire alarm control panels (FACPs). They allow semi-flush mounting of the cabinet. Red and black options are available.
Flush Fixing Kits are flush mounting plate for Gent Xenex conventional fire detection panels
The (VIG-24-FLUSH) Flush mounting kits can be used for Gent Vigilon Plus VIG-24 fire alarm panels and network node.Control Panels may be semi-flush mounted using a semi-flush surround.
Flush Surround for Gent Compact Panel
The D4 Series Cabinets are designed to house the Gamewell-FCI’s, E3 Series® Classic Emergency Voice Evacuation AA Series amplifiers and Honeywell Power Products’ Chassis Power Supplies. These cabinets are constructed from 16-gauge steel.
Graphic Annunciator Dress Plates are used when the 10" graphic display is mounted in the top row/except top row of a CAB-4 Series cabinet.
Housing surface mount, white
IDP-ACB module cabinets are for use with Silent Knight® IDP-Zone-6 interface modules. They have a built-in chassis that will accommodate one or two modules.
Enclosure for IFP-2100 Series analog/ addressable fire systems.
IPDACT Series Mounting bracket kits are for use with NOTIFIER® IPDACT Series IP communicators. The kits consist of screws and battery shield with standoffs.
IQ8Wireless cover for wireless interface, red and white
The NFS-320 intelligent Fire Alarm Control Panel is part of the ONYX® Series of Fire Alarm Controls from notifire.using NFS-320C, an optional ACM Series annunciator can be mounted in the same cabinet.
Vigilon’s range of loop powered interfaces offer a comprehensive range of connectivity options with critical plant and other safety systems
Label for release key
Large Interface Enclosures are used to mount S4 Interface modules. It consist of Plastic Box with dimension 245mmx227mmx77mm.
Locking System Stickers are required for installers.
The Loop Powered Enclosures as the name suggests are metallic enclosure with 20 and 25mm knockouts for Vigilion's Loop Powered Intefaces.
M200 Addressable Modules Mounting Box with 20mm knockouts, consists of white plastic back and a black transparent cover.
MAXPRO Cloud is a fully integrated access, video, and intrusion Security-as-aService platform.
Honeywell Ferrite Kit for MPA2 access control panel
Module housing for top-hat mounting rail
Mounting set is used for mounting the air duct construction set to round and/or insulated air ducts.
Mounting bracket is used for alignment of the industrial heat- and flame detectors UniVario. Simple installation with base Part No. 783313.
Mounting kit
Mounting kit for ALR microphone Part No. 581316.
Mounting rail for FACP
Mounting rail set for connection terminals
Notifier Retrofit Mounting Kit is used for mounting the NCA-2 Network Control Annunciator to a DPDISP dress plate.
The new Galaxy Flex range expands the product offering to the security market and offers total flexibility that translates into a number of benefits for installer and end users.
Replacement door used for mounting ACPS-610 (E) in a CAB-PS1 cabinet when replacing ACPS-2406
NANO-FLUSH from Gent is a Flush Mounting Bezel which has been designed for the Gent Nano-24 panel. The bezel will cover any imperfections in the wall when this has been cut to fit the panel.
The backbox has been engineered to provide ease-of-entry for the installation of the fire alarm control panels.
The Battery Plate used to cover battery and power supply when lower position is used in backbox.
TR-ABS is a Back Boxes which provide an enclosure for remote mounting it can be surface or semi flush mounted.
ONYX FirstVision™ backbox enclosure and door is used for perfect and secure mounting of ONYX FirstVision™ Interactive Firefighters’ Display system.
Backbox by Notifier has been engineered to provide ease-of entry for the installer.
The LEXAN model provides a tasteful combination to accent the decor of the finest lobby setting.
The Onyx Series Surface Mount Backboxes are an attractive range of backbox for mounting one ACS Series Annunciators. They have an increased depth that allows mounting of the AKS-1B Annunciator Key Switches.
BB-XP is an Optional cabinet for one or two modules.
Esser-eff alarm is a hold-open systems for fire barriers consist of a release device and a hold-open device. Hold-open systems are used to delimit buildings and objects in closed fire compartments to protect people and property.
Surface-mount backboxes are for use with Fire-Lite® ACM-8RF relay modules.
Remote Fire Alarm Panel Cabinet Only is an accessory of RFP-2100, black.
Replacement Inner Door for VIGPLUS-24 and VIGPLUS-72 (supplied in Black)
Replacement Moulding/Cover Plate for Xenex Control Panel.
S-Quad Duct Mounting Brackets are designed for the S-Quad Duct Smoke Sensor. They are available to mount the detector on circular and insulated ducts.
SK-NIC-KI accessory install kits are for use with Silent Knight® SK-NIC network interface cards.
SMB500 surface-mount boxes are for use with System Sensor® modules when flush or recessed mounting is not possible.
Service drawer (1 HU)
The Seismic kit is used for the Fire Voice 25/50 series, BB-100, BB-17, CAB-4 series cabinets, NFS-LBB and FCPS-24S6/8, CAB-PS1, SFP-2402 and SFP-2404.
VIG-FLUSH-SS is stainless steel flush mounting kit for Vigilon main control panel.
Supporting rails for wall mounting
Trim Ring is grey surface mounting for 5860 and RA-1000 remote annunciator.
Notifire offers “C” size trim ring for the cab-4 or cab-3 series cabinets.
Trim Ring Accessory includes a semi-flush-mount trim ring which is two tiers.
Trim ring for the NFS-320 intelligent addressable fire alarm control panel cabinet.
Turn latch locks are for use with Silent Knight® EVS-LOC local operator consoles. They are not intended for UL installations.
VARIODYN D1 Comprio 4-8 net (with Ethernet)
Rack Mounting Frame for VIGPLUS-24 in a 19" Rack
Remote Mount Configuration is used for VESDA Display Unit
19in rack enclosures are designed to house up to 20 display and programmer modules in a wide variety of configurations to suit the particular requirements of a site where centralised control and monitoring of the VESDA system is required
Vig Plus Repeat Outer Door (Spare)