The SENS-RDR utilizes infrared technology to read the sensitivity of i3 and 100 Series conventional detectors.

DCOIL remote test coils are required for older DNR(W) duct detector housings.

Detector test magnets simplify detector testing and maintenance

Discrete End Caps are range of sampling points to customize unique needs of applications.

Range of Pipe and Fittings products have been specially developed to provide fully matched components for the optimal performance of your whole VESDA aspirating system.

Extension pole

Flush Sampling Point Kit (c/w 2m of 10mm OD tube, Trunk adaptor, Point and decal)

Honeywell Duct Smoke Sensor is an optical smoke sensor specifically designed for use in ventilation ducting. A venturi probe samples the air in the duct for smoke. Detector housing is mounted externally to the duct.

Gent Venturi Tube is used with Duct Smoke Sensors.

Hand-held remote control is designed to communicate with Eclipse devices via infrared signals.

Xtralis Accessories offers IAS/ILS Corner Studs. Corner Studs are used as spare part and available in pack of 4.

Inline Expansion Socket comes under accessories of pipes and fittings. This is 25mm with socket of 100mm.

Intumesent 2hr Fire Collar comes under accessories of pipes and fittings. This is 25mm.

Jointing Sockets by Xtralis are allow for the connection of 2 lengths of pipe and should always be connected with ABS solvent cement.

Large Check Valve comes under accessories of pipes and fittings. This is 25mm and also called as blow out valve.

M6 Nut comes under accessories of pipes and fittings. This is used for fitting clip to the end of threaded rod.

M6 Raw Plug Adaptor comes under accessories of pipes and fittings. This is used for fixing clip to wall.

M6 Rod Adaptor comes under accessories of pipes and fittings. This is used for fitting clip to side of rod.

M8 Nut comes under accessories of pipes and fittings. This is used for fitting clip to the end of threaded rod.

M8 Rod Adaptor comes under accessories of pipes and fittings. This is used for fitting clip to side of rod.

VESDA-E VEA microbore tubes are custom made, high quality plenum rated flame retardant polyethylene tubes. They have superior stress crack resistance for reliable long-term performance

Natural Capillary Pipe comes under accessories of pipes and fittings. This is 10mm OD.

The Pipe Elbows by Honeywell are used to divert pipework around obstructions. They should always be connected with ABS Solvent cement.

PIP-033 Condensate Drain Pipes are passive element of the installation, which is mounted on the pipe using the PIP-008 tee

Pipe (ABS), diameter 25 mm

A 45 degree pipe elbow by VESDA which is specially developed to provide fully matched components for the optimal performance of your whole VESDA aspirating system.

Honeywell Prefilter for use with commercial duct mounted electronic air cleaner.

Rack mounting Heavy Duty Drawer with PSU

The S4-34741-50 are S4 Obscuration Test Card designed for use with gent beam detectors.

ST metal sampling tubes may be installed from the front or back of System Sensor® HVAC duct smoke detection and monitoring products. The tubes lock securely into place and can be removed by releasing the front or rear locking tab.

Flexible Connector by Xtralis is an integral part of the VESDA aspirating smoke detection (ASD) technology.

Sensepoint XCD Calibration Kits are specially designed for monitoring gases along with Honeywell Analytics' sensors in potentially hazardeous or explosive atmosphere.

Sight Glass with Condensation Drain comes under accessories of pipes and fittings. This is 25mm.

Smoke detector tester

Telescope and Brackets for PRO E-series

The Tamper Proof Sampling Points (TPSP) provide an elegant addition to modern decor and can both minimize the risk of vandalism and tolerate abuse.

Test gas for smoke detector tester 805582

Test head for heat detector together with battery & charger

VESDA capillary pipes and fittings are produced in red ABS under a stringent quality control system.

VESDA Adaptors are produced in red ABS (Acrylonitrile Butadiene Styrene) is a robust polymer, which has the most suitable physical properties for aspirating detection, optimising performance with tensile strength, chemical resistance and ductility.

VESDA Radius Bends are produced in red ABS under a stringent quality control system. ABS is a robust polymer.

Standard sampling points are designed for a ceiling with a void where micro bore tubes are run in the void and sampling points are mounted in the ceiling.

VESDA-E VEA sampling point and microbore tube is fully supervised by the detector. VEA sampling points are available in two different type standard and surface mount. It can be used in Healthcare, Offices and Electrical cabinets.

ASD DET CXN VESDA TALK/LINK

VESDA MANIFOLD ULTRASONIC FLOW VLI

VSP-877 flush-mount sampling points provide a functionally and aesthetically improved alternative to the conical sampling points used in Xtralis® aspirating smoke detection (ASD) pipe networks.

Vesda ABS End Caps are a part of Vesda pipe and fittings range.These end caps have been specially developed to provide fully matched components for the optimal performance of the whole VESDA aspirating systems.

Vesda Xtralis Pipe Clip has been designed to secure air sampling pipe using a quick clamp action without the need of additional fixings. These pipe clips are suitable for indoor or outdoor use having excellent resistance to UV, oil and petrol.

The Xtralis 2-Way Ball Valves are designed to control the flow of fluids in Vesda Smoke Detectors.

The VESDA Xtralis PIP-025 is a 25 mm x 12" Condensation Valve Trap with Ball Valve. Aspirating Pipe and Fittings are produced in red ABS under a stringent quality control system.

The Xtralis PIP series is designed to make a better quality pipe system.

VEA provides assured detection through active sampling and end to end system integrity monitoring.

Honeywell's Xtralis Tamper Proof Sampling Points are a part of Aspiring Smoke Detection. They can minimize the risk of vandalism and tolerate abuse.

The Xtralis Trunk Adapter PIP-016 have been specially developed to provide fully matched components for the optimal performance of your whole VESDA aspirating system.

The VESDA-E VEA Microbore tubes are custom made, high quality plenum rated flame retardant polyethylene tubes that are reliable long-term performance. They are lightweight and flexible for easy handling and installation.

The VESDA-E VEA series of detectors are used for early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.

Female Air Line Adaptor comes under accessories of pipes and fittings. This is 25mm to 3/8 BSP.