5193 Series V-Plex® addressable photoelectric smoke detectors are designed to provide open area protection and to be used with compatible UL or ULC listed Honeywell control panels that support V-Plex technology.
6500RS are conventional reflector- type linear optical beam smoke detectors designed to operate as a component of a conventional fire alarm system
Analogue addressable Photoelectronic sensors are designed for open area protection and must only be connected to control panels that use a compatible proprietary analogue addressable communication protocol for monitoring and control.
ADT Detector Baffles are used to direct the sampled airflow through the point detectors housed in the ICAM IAS aspirating smoke detector.
The Baffle for UTC Fire and Security detector DP 721I & DP 2061 (pack of 10).Baffles are used to direct the sampled air flow through the point detectors.
Honeywell InnovairFlex® DNR intelligent non-relay photoelectric duct smoke detector and DNRW watertight nonrelay photoelectric duct smoke detector.
The ECO1002 multi-criteria detector uses a state-of-the-art optical chamber and a thermal element combined with a microprocessor, running sophisticated algorithms to provide quick and accurate detection of fires.
ECO1003 optical smoke sensors use state-of-the-art optical chambers combined with application-specific integrated circuits (ASIC) to provide quick and accurate detection of fires.
Eclipse™ Series Photoelectric Smoke Detector with Isolator utilizes all digital protocol that provides faster device response time with more flexibility. Eclipse Series is compatible with the Honeywell XLS-ELCM-320 and XLS-ELEM-320 Module.
FS20X Flame Detector
FS24X Flame Detector
The NOTIFIERÂ® FSP-951 Series intelligent plug-in smoke detectors are designed for both performance and aesthetics, and are direct replacements for the FSP-851 Series.
FSP-951 Smoke Detectors intelligently designed for both performance and aesthetics with new modern, sleek, contemporary design
FWD-200 SWIFT® Wireless Detectors provide secure, reliable communication to the Fire alarm Control Panel across redundant communication mesh network
Photoelectric Smoke Detectors provides features that surpass conventional detectors and are use with IFP-series fire alarm control panels. They have a unique optical sensing chamber to sense smoke produced by a wide range of combustion sources.
Honeywell's farenhyt series smoke detectors are intelligent plug-in smoke detectors designed for both performance and aesthetics.
The HM Series Photoelectric smoke detectors by Honeywell deliver high responsiveness, reduced sensitivity to dust and false alarms resulting from ingress of insect and other debris.
DFS8M is a wireless photo-electronic smoke detector is suitable for residential and commercial applications also It detects all types of smoke and has a built-in siren.
IDP intelligent photoelectric smoke and thermal detectors are plug-in smoke detectors, with integral communication, and provide features that surpass conventional detectors.
Intelligent Photoelectric Smoke Detectors combine a photoelectric sensing chamber with addressable analog communication. They provide exact detector location for selective maintenance when chamber contamination reaches unacceptable levels.
Notifier FSP-951 Series intelligent plug-in smoke detectors are designed for both performance and aesthetics.
The intelligent VESDA-E VEP Series aspirating smoke detectors bring the latest and most advanced detection technology to provide very early warning and the best nuisance alarm rejection to a wide range of applications.
JTY-GD photoelectric smoke intrinsically safe detector is designed to provide open area protection and is for use with 2-wire control panels via interface module.
Battery Operated Smoke Detector by System Sensor is designed to give early warning of developing fires and provide precious escape time for you and your family before fire spreads.
Linear Smoke Detector LRMX with a flame resistant ABS plastic housing consists of detector, operating and control unit. The LRMX has a range of 40 m using one single reflector.
VESDA-E VEA microbore tubes are custom made, high quality plenum rated flame retardant polyethylene tubes. They have superior stress crack resistance for reliable long-term performance.
System Sensor Model 2351 Photoelectric Smoke Detector are combined with the latest state of the art optical chamber which provides efficient and accurate detection of fires with a high level of resilience to non-fire environmental influences.
Multi-Stimulus Detector Tester TF 2001
Multisensor fire detector using patented dual angle optical scatter as well as additional heat detector sensor evaluation to guarantee the detection of different types of fire from smoldering fires to open fires with constant sensitivity level.
O²T/F multisensor fire detector IQ8Quad with integrated flasher.
O²T/Sp multisensor fire detector IQ8Quad with integrated sounder and speech.
OSE-HP-01 OSID high power emitters are battery powered and interact with an OSID imager to provide early warning smoke detection.
OSID Demo kit consisting of 2 Emitter (fitted with alkaline batteries), 1 Imager, 1 OSID Installation Kit, fitted in a carry case with mounting plates.
Multisensor fire detector with integrated smoke detector, heat detector and gas sensor (CO) with enhanced false alarm management.
Honeywell TC806B3010 FSP-951 Series low-profile Intelligent Photoelectric Sensor Flash Scan series detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel
The intelligent plug-in smoke detectors are designed for both performance and aesthetics.
S-Quad Dual Optical & Heat Sensors are truly intelligent analogue sensor combining local processing in the sensor and the panel to achieve an immediate response to real fi res whilst minimising the risk of false alarms.
S-Quad Optical & Heat Sensors are truly intelligent analogue sensor combining local processing in the sensor and the panel to achieve an immediate response to real fires whilst minimising the risk of false alarms.
SWIFT Wireless Addressable Devices is your turnkey solution for fire protection, emergency communications and CO detection all in one easy to use package . SWIFT Wireless Addressable Devices has always focused on functionality and flexibility
NOTIFIER’s FS-OSI-RI intelligent addressable reflector-type linear optical beam smoke detector is uniquely suited for protecting large open areas with high ceilings, where spot-type smoke detectors are difficult to install and maintain.
VESDA-E VEA local relay StaX allow signaling of alarm locations from detectors via relays and provide mounting for fire panel loop input modules inside the enclosure.
VESDA-E VEA Series of detectors combine VESDA® reliability and early-warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.
The VSP-971 are the smoke sensor modules for the VESPA-E VEA-40. The VESDA-E VEA series of aspirated detectors combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options.
VESDA-E VES Smoke Detector delivers a range of revolutionary features Flair Detection Technology that provide user value
The Wireless Smoke Detector With Sounder detects all types of smoke and has a built-in siren. It is suitable for residential and commercial applications.
i³™ Series offers conventional, photoelectric and photo/thermal smoke detectors in both 2-wire and 4-wire formats.
Start your search with category name, product name, part number, etc.
Copyright © 2022 Honeywell International Inc.