The VESDA-E VEA series of detectors combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.

6500-MMK multi-mounting kits allow 6500 beam smoke detectors to be mounted to ceilings or to walls where the detector and reflector cannot be mounted within 10° of one another.

Spare Plastic Front cover for VES-A00-P smoke detector. It has LEDs in it for indication.

The Blanking Baffle is used with ICAM IAS aspirating smoke detector.

The 19 inch rack enclosures are designed to house up to 20 display and programmer modules in a wide variety of configurations to suit the particular requirements of a site where centralised control and monitoring of the VESDA system is required.

The VSP-976 is a display front panel for VESDA-E VEA series of smoke detectors.

VESDA-E FRT COVER VEA-040-A00

VSP-030 filters are for use with VESDA® VLI intelligent detectors.

VLI Secondary Foam Filter is an Internal secondary filter spare part for VESDA VLI.

VESDA-E Filter Cartridge is field replaceable filter of VESDA-E detectors. It filters coarse particles

Installation kits for OSID detectors include a laser alignment tool, a test filter, a PC cable, a cleaning cloth, and a manual.

OSP-003 acrylic test filters are intended for use with OSID detectors.

Remote annunciators are designed for both conventional and intelligent applications. Their red LED provides visual indication of an alarm condition.

FSL100 test lamps are rechargeable, handheld IR and UV radiation sources that are specifically designed to test Honeywell FSL100 series flame detectors. Their range is approximately 4 meters (13 ft).

OSE-RBA spare alkaline battery packs are intended for use with the open-area smoke imaging detection (OSID) devices.

Heating kits for use to prevent condensation with the BEAM1224 conventional beam smoke detectors. They lessen the likelihood of condensation by maintaining the unit at a temperature that is slightly higher than the surrounding air.

Bluetooth-Enabled Industrial Gas Transmitter

Replacement sensors for the Sensepoint XCL and Sensepoint XRL families of gas detectors

AGILE wireless base

Common accessories and spares for the Sensepoint, Sensepoint XCD, Sensepoint XRL, Series 3000, OELD and RAEGuard 2

XCD Sensors and Transmitters supplied separately

OSID beam detector FTDI cables allow connection of a PC with OSID diagnostic software to the imager.

Test, mounting and interface accessories and spares for the FS20X and FS24X Flame Detectors

Xtralis ICAM Accessories offers Medium and fine filter elements for the internal filters inside the ICAM IFT, ICAM IAS and ICAM ILS series detectors. Replacement filters elements are available in pack of 10 with Black colour

Anti-Condensation Film is used for OSID-EH housings. An easy applicable film that provide long time resistance to condensation on the glass fronts.

Industrial Gas Transmitter

FS20X Flame Detector

Accessories and Spare parts for the Sensepoint XCD family

Sensepoint XCD

Single-gas and multi-gas mixtures for monitor calibration

Banderoles to mark the suction points

The VESDA Modbus high level interface models links VESDAnet1 with PC software monitoring tools, building management systems (BMSs) or fire alarm control panels (FACPs). They are Type 2 models which have the echoing function is disabled.

OSID wire guards are steel cages designed to protect OSID imagers and emitters from vandalism and accidental damage. The cages are constructed of heavy gauge steel wire with a corrosion-resistant polyester coating.

Anti Condensation Film is an easy applicable film that provide long time resistance to condensation on the acrylic Emitter lens

VESDA-E VEA RA joiners are right angle joiners for VESDA-E VEA microbore tubes. They come in packs of 10.

Flush Sample Point Head only for 10 mm OD tube.

Pipe – 3⁄4”

VESDA® pipes and fittings make up a network of dependable specialty piping that constantly and efficiently carries air samples from protected zones to highly sensitive detectors.

Xtralis spare front cover is use with the VESDA-E VES & VESDA-E VEP Aspirating Smoke Detector. It consist of plastic with 3.5in Display size.

VSP-960 is used as a mounting bracket for VESDA-E.

VESDA-E VEA-40 Mounting Bracket is an accessory for VESDA-E VEA Local Relay StaX.

In-Line Filter Elements provide to customers the ability to address a wide array of harsh environments with high levels of airborne contaminants in a simple and cost-effective manner.

VESDA Sensepoint XCL Replacement Filter

VSP 850 in-line filters provide Xtralis® customers the ability to address a wide array of harsh environments with high levels of airborne contaminants in a simple and cost-effective manner.

OSID environmental housings protect OSID imagers and emitters from dust and water ingress in industrial environments. The glazed housings are made of ABS and the glass windows cause minimal attenuation of the UV and IR beams.

OSID environmental housings protect OSID imagers and emitters from dust and water ingress in industrial environments. The glazed housings are made of ABS and the glass windows cause minimal attenuation of the UV and IR beams.

VESDA Pipe and Fittings are part of an integrated system manufacturedfrom specialty plastics designed for use with most aspirating smoke detectionsystems, the VESDA VLP system in particular

VESDA-E Sampling Module

Xtralis Smoke detector is an interface card for the range of Xtralis VESDA VLF smoke detectors. Multi-function Control Card expands the range of input and output communications a VLF detector can perform.

Vesda Test Transformers are previously known as the Hot Wire Test Power Supply Unit. They are used to test very early warning aspirated smoke detection equipment.

Vesda Remote Mount Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators

VESDA VLF remote display modules provide real-time indication of the status of a VESDA detector.

Remote Mount Configuration is used for VESDA Display Unit

Remote Display Module is designed for use with the Laser compact range and it provides real-time indication of the status of a VESDA detector.

VESDA® LCD Programmers are menu-driven, allowing the user to conveniently configure, commission, and maintain a VESDA aspirating smoke detection system, as well as program each individual detector.

Black and White detector kits for 200 Series detectors.

FSX™ fire and flame detectors sense the WideBand IR™ radiant energy of blackbody particulate and molecular emissions generated by both hydrocarbon and nonhydrocarbon flames and fires.

The VESDA-E VEA Microbore tubes are custom made, high quality plenum rated flame retardant polyethylene tubes that are reliable long-term performance. They are lightweight and flexible for easy handling and installation.

The VESDA-E VEA series of detectors are used for early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.

The Tamper Proof Sampling Points (TPSP) provide an elegant addition to modern decor and can both minimize the risk of vandalism and tolerate abuse.

XCL-XRL-SC-H2 is a VESDA Sensepoint XCL/XRL replacement gas sensor for hydrogen gas.

Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators.

Remote Mount Display without Relay is a VESDA Laser Industrial (VLI) remote display module containing high-intensity, flashing Alarm light-emitting diodes (LEDs).

Remote Mount Display Modules provides real-time indication of the status of a VESDA detector.

Remote VESDA VLC Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators.

Remote Scan display provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators.

The VRT-600 is a Remote Mount Display Module designed for use with the Laser PLUS range. Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display..

InnovairFlex™ 2-wire photoelectric duct smoke detectors sense airflow at speeds ranging from 100 to 4,000 ft/min.

AirSCan IRF9 Sensor by Honeywell Analytics is a range of Infrared diffusion-based gas detection that enables thermal stability and freedom from vibration. The IRF9 satisfies AB32 California code and is CARB compliant.

VRT-900 includes blank plates with a remote mounting box and has 12 relay version for VLS.The Remote Box can house a single module with a termination card.

Scanner Relay Processor Module (DRP) is required if remote relays are not used with display.

VESDAnet sockets interface are required when a standard unit is used to provide a flexible solution where permanent mounting is not required in this case VESDAnet sockets connects the HLI onto the VESDAnet network.

Test and Commissioning Tools are designed for Wire burn testing/Smoke detectors.

The DST family of sampling tubes are pieces of steel piping with a series of holes drilled the entire length of the tube and should extend the entire width of the duct.

Spare Exhaust Adaptor for the VEU series of aspirating smoke detectors.

VEA provides assured detection through active sampling and end to end system integrity monitoring.

VESDA-E VEA microbore tubes are custom made, high quality plenum rated flame retardant polyethylene tubes. They have superior stress crack resistance for reliable long-term performance

VSP-877 flush-mount sampling points provide a functionally and aesthetically improved alternative to the conical sampling points used in Xtralis® aspirating smoke detection (ASD) pipe networks.

Honeywell's Xtralis Tamper Proof Sampling Points are a part of Aspiring Smoke Detection. They can minimize the risk of vandalism and tolerate abuse.

End-of-line (EOL) resistors are sold in packs of 10 and are available in 4.7 or 47K Ohm.

The VLI detector combines a fail-safe Intelligent Filter (patent pending) with an advanced clean-air barrier for optics protection allowing the use of absolute detection and a long detection chamber life without the need for recalibration.

VESDA-E VEA microbore tubes are custom made, high quality plenum rated flame retardant polyethylene tubes. They have superior stress crack resistance for reliable long-term performance

Standard sampling points are designed for a ceiling with a void where micro bore tubes are run in the void and sampling points are mounted in the ceiling.

VESDA-E VEA sampling point and microbore tube is fully supervised by the detector. VEA sampling points are available in two different type standard and surface mount. It can be used in Healthcare, Offices and Electrical cabinets.

Replacement Sensor for VESDA Sensepoint XCL Detectors.

Open-area smoke imaging detection emitters (OSIDs) are a new innovation in projected beam smoke detection technology using advanced dual wavelength projected beams and optical imaging technology for early warning smoke detection.

VESDA® Modbus type 3 HLIs act as a proxy for all VESDA devices on the VESDAnet™ network, providing access to rich status information available from VESDA detectors, as well as the ability to control and configure these devices.

SS Series UV/IR test lamps are designed for use with SS4-AS, SS4-AS2, and SS4-AUV2 fire and flame detection devices. They come with a PW-3123-0005 universal charger.

VESDA-E Smoke Detection Chamber

VESDA-E Series aspirator

VESDA-E VEA Series of detectors combine VESDA® reliability and early-warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.

Multi-Spectrum™ SS4 electro-optical fire detectors are fast reacting, digital, configurable, computerized “smart” units.

VESDA® VLI early warning aspirating smoke detection systems are designed to protect industrial applications and harsh environments up to 21,520 ft2.

OSE-HP-01 OSID high power emitters are battery powered and interact with an OSID imager to provide early warning smoke detection.

VESDA Sensepoints XCL are Micro Bore ASD System gas detectors come complete with the main detector unit (pre- installed with sensor cartridge), two cable glands, calibration/flow cap, flexible tube and tube clips to connect to VEA tubing.

Xtralis the manufacturer of the market leading VESDA Aspirating Smoke Detection (ASD) technology has developed with its sister company

VESDA-E VEA local relay StaX allow signaling of alarm locations from detectors via relays and provide mounting for fire panel loop input modules inside the enclosure.

Aspirated Gas Detection for Micro Bore ASD System (VESDA-E VEA Addressable Aspirating Smoke Detection) and When used with the VESDA-E VEA.

The VSP-971 are the smoke sensor modules for the VESPA-E VEA-40. The VESDA-E VEA series of aspirated detectors combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options.

Honeywell’s Touchpoint™ plus controllers bring a whole new control experience to your small system of gas detectors. Its modular approach enables you to take control and configure what you need for a wide range of applications.

VESDA Sensepoint XCL Micro Bore provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats.

ASD SITE LIC PRIMARY KIT VSM4

The VSM4 software product are valuable revenue generator for Xtralis distributors.

Bluetooth-Enabled Aesthetic Gas Detector