B501 bases are four-inch flangeless mounting bases designed for use with System Sensor® 200 Series detectors. They are intended for use with intelligent systems that have screw terminals for power (+ and -) and remote annunciator connections.
6500-SMK surface-mount kits are intended for use with beam detectors to mount transmitters and receivers when using 6500-MMK multi-mounting kits.
F-A3384-000 air filters are replacement filters for 8000 Series detectors. These filters combine a 30 micron filter element and a plastic housing into a single module that reduces service time and labor.
Anti Condensation Film is an easy applicable film that provide long time resistance to condensation on the acrylic Emitter lens
Anti-Condensation Film is used for OSID-EH housings. An easy applicable film that provide long time resistance to condensation on the glass fronts.
Aspirated Gas Detection for Micro Bore ASD System (VESDA-E VEA Addressable Aspirating Smoke Detection) and When used with the VESDA-E VEA.
B401 plug-in detector bases are used with System Sensor® smoke and heat detectors. These bases make detectors more versatile than equivalent direct-wired models.
Surface mount deep base in red
Blank Plates by Xtralis are provide solutions the earliest possible warning of an impending fire hazard.
CO2 Replacement Cartridges for VESDA ECO Ex Gas Detector.
Compact Remote Display Module monitors and reports the status of a VESDA aspirating smoke detector.
The ECO1005 thermal detector belongs to System Sensor’s ECO1000 range of detectors. ECO1000 is a range of conventional detectors produce latest manufacturing technology and supplied with an array of advanced features, making them ‘better by design’.
M200E-DIN provides a DIN rail mounting option for one module of addressable Honeywell Morley-IAS and Notifier series modules.
M200-DIN is a Rail Bracket used with M700 series Module. The M700 Series module is designed for use protocol fire alarm control panel and include selectable loop isolation in every device.
DST metal sampling tubes may be installed from the front or back of System Sensor® HVAC duct smoke detection and monitoring products. The tubes lock securely into place and can be removed by releasing the front or rear locking tab.
Detector Cover Assembly with EMC Shields are spare parts of Very Early Smoke Detection Apparatus (VESDA).
Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators.
Dual Gas Cartridges by Xtralis are to introduce ECO, the industry’s first system to combine ASD with gas detection and environmental monitoring.
The ECO 1000 deep detector bases are used in the ECO1000 series detectors with fire alarm control panels.
The Vesda Eco provides early warning of toxic, oxygen and flammable gas hazards to protect personnel and property ensuring business continuity.
The Eco gas detector provides early warning of toxic, oxygen and flammable gas hazards to protect personnel and property ensuring business continuity. They uses an existing aspirating pipe network to actively monitor for gas escapes and build-ups.
ECO™ replacement sensor cartridge accessories are used for vesda Eco detectors.
The Vesda Eco provides early warning of toxic, oxygen and flammable gas hazards to protect personnel and property ensuring business continuity. Vesda Eco uses an existing new aspirating pipe network to actively monitor for gas escapes and build-ups.
Xtralis, the industy’s first combined aspirated smoke and gas detection system. It provides early warning of toxic, oxygen and flammable gas hazards to protect personnel and property while ensuring business continuity.
ECO1000 conventional relay bases are for use with System Sensor® ECO1000 series sensor heads and are designed to operate in both 2- and 4-wire systems, with screw terminals provided for power connections and remote annunciator.
System Sensor’s ECO1000 range of detectors have been produced using the latest in manufacturing technology, supplied with an array of advanced feature.
Bases that are intended for use with ECO1000 Series detectors.
The ECO1002 multi-criteria detector uses a state-of-the-art optical chamber and a thermal element combined with a microprocessor, running sophisticated algorithms to provide quick and accurate detection of fires.
The ECO1005 A detector is a rate of rise sensor, which uses a state of the art thermal element combined with an application specific integrated circuit (ASIC)to provide quick and accurate detection of fires.
ECO1003 optical smoke sensors use state-of-the-art optical chambers combined with application-specific integrated circuits (ASIC) to provide quick and accurate detection of fires.
End-of-line (EOL) resistors are sold in packs of 10 and are available in 4.7 or 47K Ohm.
Extension wrench for Use with Gamewell-FCI’s DH Series of electromagnetic fire door holders.
FAAST Automatic Purging Unit provides a fully integrated and compact solution with user-selectable preventative or event triggered purging programs.
Part of the FSX family of electro-optical flame detectors, the FS20X represents a quantum leap in integrating infrared and ultraviolet sensing technologies. • Quick Specs • Field of view: 90° full 100% core of vision, ± 45° from on axis
Sophisticated software algorithms and dual microprocessors ensure that the FS24X has the highest fire detection performance combined with optimal false alarm rejection. • Quick Specs • Sensitivity: Very high, high, medium and low -switch selectable
Test, mounting and interface accessories and spares for the FS20X and FS24X Flame Detectors
Galvanic Isolators are single channel isolated repeater. They are suitable for use as an intrinsically safe isolator between an IST200 translator module and up to a maximum of 15 x 22051EISE intrinsically safe photoelectric smoke sensors.
Sampling Hole Clips are designed to alleviate such potential issues, by providing a clear, visual indication of sampling point location and its associated hole size.
Housing kit for IQ8FCT XS For surface mounting of up to 6 transponders IQ8FCT XS (Part No. 808606), consisting of housing back and cover.
VESDA ECO Ex provides early warning of flammable gas hazards to protect personnel and property whilst ensuring business continuity.
In-Line Filter Elements by Xstralis provides Xtralis customers the ability to address a wide array of harsh environments with high levels of airborne contaminants in a simple and cost-effective manner.
Inline flow restrictor assembly used for refrigerated storage sampling kit. The Xtralis refrigerated storage sampling kit provides a standardised method of smoke sampling for Refrigerated Storage facilities.
The 6500-LRK is long range of reflection kit for 6500 and 6500S Reflected Type Projected Beam Smoke Detector.
M200 Addressable Modules Mounting Box with 20mm knockouts, consists of white plastic back and a black transparent cover.
VESDA-E VEA microbore tubes are custom made, high quality plenum rated flame retardant polyethylene tubes. They have superior stress crack resistance for reliable long-term performance
VESDA-E VEA Microbore Tube Cutter are used for cutting microbore tubes.
Bringing new visibility, reliability and ease of use to gas detection in semiconductor processing and industrial manufacturing. • Quick Specs • Flow Rate: 500 mLmin • Transport Time: 2 to 30 seconds maximum
Non Scanner Relay Processor Module (DRP) is required if remote relays are not used with display.
OSE-HP-01 OSID high power emitters are battery powered and interact with an OSID imager to provide early warning smoke detection.
OSE-RBA spare alkaline battery packs are intended for use with the open-area smoke imaging detection (OSID) devices.
OSID beam detector FTDI cables allow connection of a PC with OSID diagnostic software to the imager.
OSID wire guards are steel cages designed to protect OSID imagers and emitters from vandalism and accidental damage. The cages are constructed of heavy gauge steel wire with a corrosion-resistant polyester coating.
OSID environmental housings protect OSID imagers and emitters from dust and water ingress in industrial environments. The glazed housings are made of ABS and the glass windows cause minimal attenuation of the UV and IR beams.
Installation kits for OSID detectors include a laser alignment tool, a test filter, a PC cable, a cleaning cloth, and a manual.
OSP-002 laser alignment tools allow for quick alignment of OSID detectors. They also align and lock the eyeball and activate the emitters when locked.
OSP-003 acrylic test filters are intended for use with OSID detectors.
Open-area smoke imaging detection emitters (OSIDs) are a new innovation in projected beam smoke detection technology using advanced dual wavelength projected beams and optical imaging technology for early warning smoke detection.
Oxygen Replacement Sensor by Xtralis contains an ECO cartridge which has been calibrated to detect Oxygen (O2) ranging between 0-25% VOL. It is used as a deficiency and enrichment alarm.
The Programmer Module allows direct access to all VESDAnet devices on a VESDA smoke detection system. It allows configuration and status reporting of detectors.
Recessed Mounting Kits by System Sensor are provides simple installation solution where the application demands a lower profile sensor.
Remote Display Module is designed for use with the Laser compact range and it provides real-time indication of the status of a VESDA detector.
Remote Mount Display Modules provides real-time indication of the status of a VESDA detector.
Remote Mount Display without Relay is a VESDA Laser Industrial (VLI) remote display module containing high-intensity, flashing Alarm light-emitting diodes (LEDs).
Remote Scan display provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators.
Remote VESDA VLC Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators.
The SMK400 Surface Mounting Adaptor Kits allow 100, 200, 400 or 500 series plug-in detectors to be surface mounted when the ceiling construction prevents the use of conventional recessed metal electrical junction boxes.
Improve safety and productivity with the most flexible, user-friendly tape-based gas detector for low-level toxics • Quick Specs • Weight: 9.1 lbs. • No ChemKeys • TM • required • Intuitive LCD menu
Sampling Hole Clip delivers reliable and accurate sampling hole sizes that are fast to install and easy to locate and identify.
Scanner Relay Processor Module (DRP) is required if remote relays are not used with display.
Remotely monitor toxic gases in Class 1, Div 2 areas while reducing the maintenance, training and overall cost of gas monitoring. • Quick Specs • Input voltage range: 16 to 32 VDC (24 VDC nominal) • Communication: RS485
Replacement dust covers are for use with System Sensor® 100/200 Series smoke detectors.
Spare Plastic Front cover for VES-A00-P smoke detector. It has LEDs in it for indication.
System relay modules provides remote termination card with new software supplied in a remote mounting box and it allows reporting of any alarm or fault condition that appears on a VESDAnet loop regardless of the initiating zone.
The Tamper Proof Sampling Points (TPSP) provide an elegant addition to modern decor and can both minimize the risk of vandalism and tolerate abuse.
VSP-972 filters are spare filters for use with VEA aspirating smoke detectors.
VESDA ECO provides early warning of toxic, oxygen and flammable gas hazards to protect personnel and property whilst ensuring business continuity.
When used with the compatible range of ASD products; VESDA ECO (Ex) providescombined aspirated smoke and gas detection system.
VESDA ECO provides the industry’s first combined aspirated smoke and gas detection system. It provides early warning of toxic, oxygen and flammable gas hazards to protect personnel and property while ensuring business continuity.
VESDA ECO Gas Detection and Environmental Monitoring provides early warning of toxic, oxygen and flammable gas hazards to protect personnel and property whilst ensuring business continuity. Each ECO gas detector can house up to two gas sensors
VESDA ECO™ Sensor Cartridges are replacement cartridges for VESDA ECO™ Detectors
Xtralis spare front cover is use with the VESDA-E VES & VESDA-E VEP Aspirating Smoke Detector. It consist of plastic with 3.5in Display size.
VESDA VRT-500 is a Remote Mount Relay Module. It is designed for use with VLP, VLS and VLC detectors. The relay module is a 7 relay remote termination card with specialized software.
Xtralis the manufacturer of the market leading VESDA Aspirating Smoke Detection (ASD) technology has developed with its sister company
VESDA Sensepoints XCL are Micro Bore ASD System gas detectors come complete with the main detector unit (pre- installed with sensor cartridge), two cable glands, calibration/flow cap, flexible tube and tube clips to connect to VEA tubing.
VESDA Sensepoint XCL Micro Bore provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats.
VESDA Sensepoint XCL Replacement Filter
XCL-XRL-SC-H2 is a VESDA Sensepoint XCL/XRL replacement gas sensor for hydrogen gas.
Standard sampling points are