005883 relay interface boards provide 10 general purpose Form C relays that can be used to control any device that requires a dry contact closure.
100 Series conventional heat detectors offer superb performance and reliability in a sleek, low-profile design.
The System Sensor low profile photo electronic smoke detector is specifically designed to meet the performance requirements of the fire detection/alarm systems.
The printer is used with the Gamewell-FCI fire alarm control panels (FACPs) and provides printer capability to produce a written record of system events and status changes.
302 Series rate-anticipation heat detectors operate within a controlled range of two to three degrees of their setpoints, regardless of the rate of temperature rise. These detectors are available in either 135 °F (57.2 °C) or 194 °F (90 °C) ratings.
Adds four additional audio circuits to the ECS-125W
411 fire alarm communicators are compact, multifaceted, slave devices designed for a variety of fire, security, and non-fire applications.
411RK auxiliary relays are for use with Gamewell-FCI® 411UDAC digital alarm communicator transmitters.
411UDAC fire alarm communicators are compact, multifaceted, standalone or slave devices designed for a variety of fire and non-fire applications.
5600 Series mechanical heat detectors offer property protection against fire and are intended for non-life-safety installations where smoke detectors are inappropriate.
5820 Firefighter Key
5820XL LED I/O driver modules provide an effective means to customize your remote annunciation. They provide LED annunciation and control inputs for the fire alarm control panel (FACP).
005860T surface-mount trim rings are for use with Silent Knight® 5860 remote annunciators. Red and gray options are available.
5865-3 and 5865-4 LED annunciators provide 30 programmable LEDs (15 red, 15 yellow) for maximum flexibility with the Honeywell Silent Knight® Series fire alarm control panel (FACP).
6500-MMK multi-mounting kits allow 6500 beam smoke detectors to be mounted to ceilings or to walls where the detector and reflector cannot be mounted within 10° of one another. One kit mounts either the transmitter/receiver unit or reflector.
AP-P adapter plates are decorative plastic adapters for mounting 302 Series detectors to four-inch outlet boxes.
Expand the versatility of the InnovairFlex™ line of duct smoke detectors with System Sensor notification and test accessories.
Farenhyt Addressable Dual Relay Modules are designed for Form C switching applications which do not require wiring supervision for the load circuits. They are equipped with two individual relay control modules and two Class B monitor modules.
Addressable Pull Stations by Farenhyt are active fire protection devices and are designed to work with Silent Knight IFP-series fire alarm control panels.
Farenhyt Addressable Relay Modules are addressable relay modules with six Form-C relays for use with Silent Knight IFP-series fire alarm control panels to switch discrete contacts by code commands.
Aluminum outdoor column loudspeakers are a high-performance, public address column loudspeaker for outdoor use. They offer a broad frequency response range, low distortion, and a high sound pressure level.
Amplifier Mounting Kits by Silent Knight are used to amplify the audio message for distribution throughout the facility.
Anti Condensation Film is an easy applicable film that provide long time resistance to condensation on the acrylic Emitter lens
Anti-Condensation Film is used for OSID-EH housings. An easy applicable film that provide long time resistance to condensation on the glass fronts.
Aspirated Gas Detection for Micro Bore ASD System (VESDA-E VEA Addressable Aspirating Smoke Detection) and When used with the VESDA-E VEA.
B110LP detector bases are designed for use with System Sensor® models 2151 photoelectronic and 1151 ionization detector heads. These 2-wire bases are equipped with screw terminals for power, ground, and an optional remote annunciator.
B112LP detector bases are designed for use with System Sensor® models 2151 photoelectronic and 1151 ionization detector heads. These 4-wire bases are equipped with screw terminals for power, ground, and an optional remote annunciator.
B114LP bases are for use with System Sensor® photoelectronic detector heads. They are intended for use in 4-wire systems with terminals provided for remote annunciator and relay connections.
B116LP bases are plug-in bases for use with System Sensor® ionization detector heads and System Sensor photoelectronic detector heads.
B210W is detector base used for wireless detectors. It includes a built-in magnet so that wireless devices can establish installed and tampered states.
B224BI Plug-in Isolator Detector Bases prevent an entire communications loop from being disabled when a short circuit occurs.
B224RB Detector Relay Bases are designed for use with 200 Series detectors, and provide a single Form C contact relay for the control of auxiliary functions, such as door closures and elevator recall.
BAT Series (or Power-Sonic brand) batteries are recommended for secondary power or backup power for all NOTIFIER fire alarm control equipment.
BAT Series batteries are Power-Sonic brand batteries. BAT series (or Power-Sonic brand) batteries are recommended for secondary power or backup power for all NOTIFIER® fire alarm control equipment.
Heating kits for use to prevent condensation with the BEAM1224 conventional beam smoke detectors. They lessen the likelihood of condensation by maintaining the unit at a temperature that is slightly higher than the surrounding air.
BEAMLRK long-range kits are designed for use with System Sensor® reflective projected beam smoke detectors and allow installation between 230 to 380 ft (70 to 100 m) apart.
BEAMMMK multi-mounting kits allow reflectors and reflected beam detectors to be mounted to either vertical walls or ceilings.
Backboxes are for use with fire alarm control panels (FACPs) and are used to mount up to two batteries and power supplies.
The Blanking Baffle is used with ICAM IAS aspirating smoke detector.
CO detector replacement plate to cover the footprint of previously installed detectors.
CO1224 carbon monoxide (CO) detectors with Real Test® use a highly accurate and reliable electrochemical sensing cell to provide an early warning of dangerous CO levels.
Ceiling Loudspeaker is a cost-competitive ceiling loudspeaker which has an excellent audio performance and aesthetic appealing enclosure. This full range loudspeaker features a high sound pressure level and a wide frequency response range.
The SENS-RDR utilizes infrared technology to read the sensitivity of i3 and 100 Series conventional detectors.
DCOIL remote test coils are required for older DNR(W) duct detector housings.
The System Sensor DH400OE-1 is a steel enclosure for mounting a standard indoor rated duct smoke detector outdoors.
Detector test magnets simplify detector testing and maintenance
Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators.
The ECS-DUAL50W is an intelligent 50 watt dual channel amplifier for use with the IFP-100ECS, IFP-1000ECS or IFP-2000ECS. The ECS-DUAL50W is used to amplify audio message for distribution throughout a facility.
Single Terminal Back Boxes are used for mounting RTS151 key. Remote annunciator accessories providing reset function and has a Red LED to indicate alarm conditions.
The ECS-DUAL50W intelligent amplifiers are used to amplify audio message for distribution throughout a facility.
Use an End-of-Line device with control panel releasing circuits.
Multi-voltage conventional relays are used for high-current switching applications such as fan and damper assembly control, door control, air handling unit controls, and other types of system interfacing.
End-of-line (EOL) resistors are sold in packs of 10 and are available in 4.7 or 47K Ohm.
FFT-24 expander boards allow an additional 24 zones to Silent Knight® fire fighters telephone control systems.
FFT-FPJ firefighter phone jacks provide a quick connect to the SK-FFT fire fighter telephone system using an FFT-RHS remote handset.
FM Series electromagnetic door holders are designed for virtually any remote door release application. They are primarily used to hold fire and smoke barrier doors open until released by a remote smoke detector or other switching device.
FM Series electromagnetic door holder by Fire-Lite are designed for virtually any remote door release application. They are primarily used to hold fire and smoke barrier doors open until released by a remote smoke detector or other switching device.
FM-Series electromagnetic door holder spacers are used, when necessary, for the installation of remote door release systems.
FS20X Flame Detector
FS24X Flame Detector
FSX™ fire and flame detectors sense the WideBand IR™ radiant energy of blackbody particulate and molecular emissions generated by both hydrocarbon and nonhydrocarbon flames and fires.
Farenhyt addressable monitor modules are used with fire alarm control panels. They acts as an interface to contact devices and has attractive ivory cover plate and rotary address switches for fast installation.
Farenhyt Distributed Power Modules are connects to the FACP via the RS-485 system bus allowing up to an additional 6,000 feet of wiring. They are optically isolated providing ground loop isolation and transient protection.
Farenhyt IDP-Zone-6 is an addressable zone interface module for use with Silent Knight IFP-series fire alarm control panels (FACPs).
The IDP-Iso is an addressable line isolator module for use with Silent Knight IFP-series fire alarm control panels (FACPs).
The OSI-RI is an intelligent addressable reflector-type linear optical beam smoke detector that is uniquely suited for protecting large open areas with high ceilings, where spot-type smoke detectors are difficult to install and maintain.
Photoelectric Smoke Detectors provides features that surpass conventional detectors and are use with IFP-series fire alarm control panels. They have a unique optical sensing chamber to sense smoke produced by a wide range of combustion sources.
Honeywell's farenhyt series smoke detectors are intelligent plug-in smoke detectors designed for both performance and aesthetics.
Honeywell's farenhyt two wire interface modules have been designed for use with Silent Knight IFP-series fire alarm control panels (FACPs).
VSP 850 in-line filters provide Xtralis® customers the ability to address a wide array of harsh environments with high levels of airborne contaminants in a simple and cost-effective manner.
The trim rings are designed for semi-flush mounting applications, and intended for use with BG-12 Series fire alarm pull stations.
Fire detector protective cover helps prevent malicious or accidental false fire alarms. This unique device has helped prevent false fire alarms around the world for decades.
The FFT-STSS and FFT-STSR are compatible with the Fire Fighters Telephone communication system. The FFT-STSS is a surface mount door with keylock. The FFT-STSR is a` recessed mount door with keylock
Fire fighter telephone communication systems use with fire alarm systems provides supervision, annunciation, and control for local and remote telephone handsets.
Ceiling Loudspeaker gives desired interior compatibility for a better match with environments, ceiling loudspeaker features a high sound pressure level and a wide frequency response range, ensuring flawless acoustic performance.
FFT-HSC Firefighter handset cabinets can hold up to 10 remote handsets.
Firefighter remote handsets can be used at one time to communicate over the telephone circuit connected to the SK-FFT.
ASD SITE LIC PRIMARY KIT VSM4
TR-1 trim ring assemblies are for use with Gamewell-FCI® Flex 4-zone fire alarm control panels (FACPs). They allow semi-flush mounting of the cabinet. Red and black options are available.
VESDA RESTRICTOR FLOW PK10
The Graphic Monitoring System by Honeywell is a fire alarm monitoring system designed to simplify the management and maintenance of multiple fire alarms and speed response to emergency events.
X-NRI/EN Network Resource Interfaces are universal interface of X-618 for external control access and audio extension. It is suitable to the needs of central interfaces management required by middle-to-large applications.
Xtralis Accessories offers IAS/ILS Corner Studs. Corner Studs are used as spare part and available in pack of 4.
ISP-406 is used as a cover removal tool for IAS or ILS
Xtralis ICAM Accessories offers Medium and fine filter elements for the internal filters inside the ICAM IFT, ICAM IAS and ICAM ILS series detectors. Replacement filters elements are available in pack of 10 with Black colour
IDP addressable dual monitor modules are intended for use in intelligent, 2-wire system Farenhyt™ fire alarm control panels (FACPs).
IDP Addressable Relay Module allows a Silent Knight FACP to switch discrete contacts by code command The relay contains two isolated sets of Form C contacts, which operate as a DPDT
IDP intelligent addressable monitor modules are intended for use in an intelligent alarm system. Each monitor module is intended to interface between a control panel and normally open contact devices, such as pull stations.
IDP intelligent photoelectric smoke and thermal detectors are plug-in smoke detectors, with integral communication, and provide features that surpass conventional detectors.
IDP plug-in thermal detectors with integral communication provide features that surpass conventional detectors. These thermal detectors are for use with Silent Knight® IFP-Series fire alarm control panels (FACPs).
IDP-ACB module cabinets are for use with Silent Knight® IDP-Zone-6 interface modules. They have a built-in chassis that will accommodate one or two modules.
IDP-Control Supervised Control Modules have been designed for use in intelligent, two-wire systems, where the individual address of each module is selected using the built-in rotary switches.
IDP-Minimon is a compact and light weight addressable monitor module for use with Silent Knight IFP-series fire alarm control panels (FACPs). The IDP-Minimon acts as an interface to contact devices, such as waterflow switches and pull stations.
Enclosure for IFP-2100 Series analog/ addressable fire systems.
Honeywell's Farenhyt series Analog Addressable Fire Alarm Control Panels are the controlling unit of a fire alarm system with an Emergency Communication System (ECS).
LED/Switch Card by Silent Knight is an accessory used for IFP-2100ECS.
IPDACT IP communicators are designed to transmit fire alarm system information to central monitoring stations over any standard IP network.
IPDACT serial programming cables can transfer data in a snap and have DB9/RJ45 ports for instant connectivity.
IPDACT Series Mounting bracket kits are for use with NOTIFIER® IPDACT Series IP communicators. The kits consist of screws and battery shield with standoffs.
IPSPLT splitters allow connection of both panel dialer outputs to one cable input to the internet protocol digital alarm communicators/transmitters (IPDACT).
ISO-6 six fault isolator modules provide six equivalent circuits that will allow a portion of the communications loop to continue operating when a short circuit occurs on that loop.
ICAM FLOW SENS ASSY IAS/ILS
In-Line Filter Elements provide to customers the ability to address a wide array of harsh environments with high levels of airborne contaminants in a simple and cost-effective manner.
Inline flow restrictor assembly used for refrigerated storage sampling kit. The Xtralis refrigerated storage sampling kit provides a standardised method of smoke sampling for Refrigerated Storage facilities.
2D51 duct smoke detectors are low-profile photoelectric detectors designed for special applications, specifically for use in no-flow or low-flow air-handling systems (0 to 4,000 FPM).
InnovairFlex™ 4-wire photoelectric duct smoke detectors offer 2 sensors to 1 powerboard capability in standard (D4120) and watertight (D4120W) versions.
InnovairFlex™ 2-wire photoelectric duct smoke detectors sense airflow at speeds ranging from 100 to 4,000 ft/min.
The InnovairFlex™ Series are the only duct smoke detectors flexible enough to fit configurations from square to rectangular and everything in between.
InnovairFlex™ duct smoke detectors combine an impressive collection of innovations designed to save you time and money and provide the flexibility you need in the field.
Intelligent 50W amplifiers are for use with the IFP-100ECS, IFP-300ECS, IFP-1000ECS, IFP-2000ECS and IFP-2100ECS fire alarm control panels.
The ECS-50W is an intelligent 50 watt amplifier for use with the IFP-100ECS, IFP-1000ECS and IFP-2000ECS.
Intelligent Detector Color Kits are designed for use with NOTIFIER® intelligent detectors.
Intelligent Photoelectric Smoke Detectors combine a photoelectric sensing chamber with addressable analog communication. They provide exact detector location for selective maintenance when chamber contamination reaches unacceptable levels.
The B200SR sounder and LF sounder bases are fully compatible with existing B501BH Series sounder base installations. The device enables users to select one of two B501-supported tones (ANSI Temporal 3 or Continuous) through a jumper.
VESDA-E VEP Smoke Detector's is Built on the Flair detection technology and years of application experience, VEP detectors achieve consistent performance over their lifetime via absolute calibration.
The VESDA-E VEU series of aspirating smoke detectors is the premium detector of the VESDA-E range, and now the integrated model (VEUEBTI) has the ability to directly work with esserbus® and esserbus®-Plus through the built-in transponder.
The SWIFT® wireless modules are intelligent addressable modules which provide secure, reliable communication to the Fire Alarm Control Panel (FACP) across a Class A mesh network.
ECS-INT50W is capable of producing 50 watts of audio power on one speaker circuit. It is designed to conveniently mount in the IFP-2000ECS, IFP-1000ECS or IFP-100ECS cabinet, making it an ideal solution for small voice evacuation installations.
IPENC external enclosures are for use with NOTIFIER® IPDACT internet monitoring modules. Includes IPBRKT mounting bracket. Red and black options are available.
Intevio extension keypads are for use with remote call stations. Models available with four function buttons/LED indicators, and eight function buttons/LED indicators.
KILLARK® XAL-53 explosion-proof pull stations are suitable for use in hazardous areas due to the presence of flammable gases or vapors, combustible dust, or easily ignitable fibers.
L-PBM20A bi-directional projection loudspeakers are high-performance, 20W public address speakers. They offer a broad frequency response range, low distortion, and a high sound pressure level.
L-PCP ceiling loudspeakers are powerful ceiling mounted speakers. They are specially designed for environments, such as shops, supermarkets, educational institutes, offices, sports fields, hotels, restaurants, and wet environments.
L-PWP public address cabinet loudspeakers are intended for use in general indoor and outdoor applications.
L-Series 2-wire horn strobes include a variety of features that increase their application versatility while simplifying installation.
L-Series 4-Wire horn strobes are intended for full building notification as well as on the property ground.
L-Series bezel kits enable installers to easily turn any L-Series fire or plain device into a device that meets ECN/MNS requirements.
L-Series chime strobes are private mode notification appliances used to alert trained personnel to investigate possible emergency situations and to take appropriate action.
L-Series strobes are rich with features guaranteed to cut installation times with its lower current draw and modern aesthetics.
L-Series speaker strobes reduce costly ground faults using a plug-in design and universal mounting plate that allow the installer to pre-wire mounting plates, dress wires, and confirm wiring continuity before plugging in the speakers.
L-Series selectable output chimes are private mode notification appliances used to alert trained personnel to investigate possible emergency situations.
L-Series color lenses come in four colors options: amber, blue, green, and red. The lenses are compatible with L-Series strobes including wall- or ceiling-mount.
L-Series horns are designed to simplify installations to provide primary and secondary signaling for fire and security applications.
L-Series low frequency sounders include a variety of features that increase their application versatility while simplifying installation.
L-Series trim rings provide additional space within the backbox. The design is universal across the L-series notification appliance line and supports indoor horns, horn strobes, chimes, chime strobes, strobes, speakers, and speaker strobes.
L-Series universal expander plates cut costs and speed installation on emergency communications applications that require fire and emergency warnings by combining the functions of multiple devices on a single mounting plate and backbox.
The LED Array Series Indoor Displays are LED message centers designed for light industrial, commercial, and office use. They quickly display large amounts of information in eight colors and three rainbow effects.
LM2-PCP06x modular ceiling loudspeakers are 6W economic speakers.
The Local Operator Console provides an interface to the ECS series Emergency Communication Systems.
MNS Indoor Display's are LED message centers designed for light industrial, commercial and office use
The MegaDot Display offers message clarity from a 200 ft. (61 m) distance allowing you to visually connect with your employees or customers. the MegaDot uses 10.2cm tall characters for dazzling, moving colour messages you know everyone will notice
The DST family of sampling tubes are pieces of steel piping with a series of holes drilled the entire length of the tube and should extend the entire width of the duct.
VESDA-E VEA Microbore Tube Cutter are used for cutting microbore tubes.
The Mounting Base is required to meet local code and application requirements and for that System Sensor offers standard 4in and 6in bases.
Multi-Criteria Photo/Thermal/Infrared Detectors are intelligent, multi-criteria detectors that combine photoelectric, thermal, and infrared (PTIR) sensors in one unit to sense multiple components of a fire.
Multi-voltage conventional relays are used for high-current switching applications such as fans and damper assembly controls, door controls, air handling unit controls, and other types of system interfacing.
Network Voice Control Modules by Honeywell are an integral part of ECS accessories used for IFP-2100ECS. It has a supervised microphone for live communication and an interface for the Emergency Communication System.
Non Scanner Relay Processor Module (DRP) is required if remote relays are not used with display.
OSE-HP-01 OSID high power emitters are battery powered and interact with an OSID imager to provide early warning smoke detection.
OSE-RBA spare alkaline battery packs are intended for use with the open-area smoke imaging detection (OSID) devices.
OSID beam detector FTDI cables allow connection of a PC with OSID diagnostic software to the imager.
OSID wire guards are steel cages designed to protect OSID imagers and emitters from vandalism and accidental damage. The cages are constructed of heavy gauge steel wire with a corrosion-resistant polyester coating.
OSID environmental housings protect OSID imagers and emitters from dust and water ingress in industrial environments. The glazed housings are made of ABS and the glass windows cause minimal attenuation of the UV and IR beams.
Installation kits for OSID detectors include a laser alignment tool, a test filter, a PC cable, a cleaning cloth, and a manual.
OSP-002 laser alignment tools allow for quick alignment of OSID detectors. They also align and lock the eyeball and activate the emitters when locked.
OSP-003 acrylic test filters are intended for use with OSID detectors.
Open-area smoke imaging detection emitters (OSIDs) are a new innovation in projected beam smoke detection technology using advanced dual wavelength projected beams and optical imaging technology for early warning smoke detection.
PAM multi-voltage relay modules are ideal for applications where remote relays are required for control or status feedback.
Flush Sample Point Head only for 10 mm OD tube.
Power Amplifier RK-AMP500
RA-2000 remote annunciators are used to operate and program Silent Knight® Farenhyt™ Series fire alarm control panels (FACPs).
RK-MCU INTEVIO master control units are the central management device of the INTEVIO PA/VA system, which is used to manage and monitor all devices and perform various operations.
RK-MIC remote call stations are used to perform various broadcasts and live announcement in zones.
Reversing relay and synchronization modules enhance the operation of 2- and 4-wire i³™ Series detectors equipped with a sounder.
Remote annunciators are designed for both conventional and intelligent applications. Their red LED provides visual indication of an alarm condition.
Remote Display Module is designed for use with the Laser compact range and it provides real-time indication of the status of a VESDA detector.
Remote display modules accessories are used in VESDA® VLI early warning aspirating smoke detection systems.
Remote Fire Alarm Panel Cabinet Only is an accessory of RFP-2100, black.
Remote Mount Display Modules provides real-time indication of the status of a VESDA detector.
Remote Mount Display without Relay is a VESDA Laser Industrial (VLI) remote display module containing high-intensity, flashing Alarm light-emitting diodes (LEDs).
Remote mounting kits are for use with Silent Knight® 5815XL signaling line circuit (SLC) expanders.
The Remote Paging Unit that provides a supervised microphone, 8 emergency message buttons, and 16 mappable audio switches. This lower profile remote paging unit is ideal for locations where the standard LOC won’t fit.
Remote Scan display provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators.
Remote VESDA VLC Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators.
VESDAnet sockets interface are required when a standard unit is used to provide a flexible solution where permanent mounting is not required in this case VESDAnet sockets connects the HLI onto the VESDAnet network.
The Remote Voice Module provide an interface to the emergency communication system and a supervised microphone for live communications.
SB-I/O surface-mount backboxes are for use with Silent Knight® PS-SA and PS-DA pull stations.
SB-10 surface backboxes are for use with Fire-Lite® BG-12LR agent release stations.
SK-F485C fiber to SBus converters offer a seamless conversion from panel SBus connection to fiber and back again.
SK-NIC-KI accessory install kits are for use with Silent Knight® SK-NIC network interface cards.
SK-SCK seismic compliance kits are for use with Silent Knight® fire alarm control panels (FACPs).
The Notifier SP-4 features four messages Fire, Weather, Announcement and Evacuate.
SP-2B MNS Announcement Evacuate sign is slim 2-1/2 deep box is made of steel, is painted white and is designed for surface mounting. The messages are printed in clear within a black box on clear film.
SSM Series alarm bells are low-current, high-decibel notification appliances for use in fire and burglary systems or other signaling applications.
ST metal sampling tubes may be installed from the front or back of System Sensor® HVAC duct smoke detection and monitoring products. The tubes lock securely into place and can be removed by releasing the front or rear locking tab.
The STI is an accessories that are been used with STI Stopper II®. The accessories that are been used are conduit gasket and conduit spacer.
The System Sensor SWIFT® Wireless system offers an AV base to support L-Series devices in wireless installations.
SWIFT intelligent wireless detectors provides secure, reliable communication to the Fire Alarm Control Panel (FACP) across a Class A mesh network. Wireless detectors can use where it is costly, possibly dangerous to use traditional wired devices.
SWIFT Wireless Addressable Devices is your turnkey solution for fire protection, emergency communications and CO detection all in one easy to use package . SWIFT Wireless Addressable Devices has always focused on functionality and flexibility
W-SYNC SWIFT® wireless synchronization modules provide audio and visual synchronization between SWIFT® notification appliances and System Sensor® wired notification appliances, supporting the integrated wired/wireless solution.
SWIFT® plastic battery cartridges are intended for use with the SWIFT AV base and SWIFT pull stations and come in a pack of 10.
Banderoles to mark the suction points
Scanner Relay Processor Module (DRP) is required if remote relays are not used with display.
Sensepoint XCD Calibration Kits are specially designed for monitoring gases along with Honeywell Analytics' sensors in potentially hazardeous or explosive atmosphere.
Sensepoint XCD RTD
Serial and parallel gateway modules allow you to connect virtually any standard PC-compatible printer to a Silent Knight® Series fire alarm control panel (FACP) and to generate reports on site.
IFP-Net is a Microsoft® Windows® based graphic user interface linking selected fire alarm control panels together to a PC to easily monitor them.
Farenhyt Series Remote Fire Alarm Panel is can be used in a networked system where at least one IFP-2100 is in the system.
Multi-mode and single-mode fiber-optic modules are plug-in fiber loop modules that work as a single channel to transmit or receive communications with Silent Knight® network interface cards.
Six Circuit Supervised Control Modules by Farenhyt are intended for use in an intelligent alarm systems for AC or DC switching applications which requires wiring supervision.
The Fire-Watch 411 series from Fire-Lite Alarms are compact slave Digital Alarm Communicator Transmitters (DACTs) that are designed for a variety of fire, and non-fire applications.
Test and Commissioning Tools are designed for Wire burn testing/Smoke detectors.
Spare Plastic Front cover for VES-A00-P smoke detector. It has LEDs in it for indication.
SpectrAlert® Advance Series mini-horns are designed to simplify installations to provide primary and secondary signaling for fire and security applications.
SpectrAlert® Advance audible visible (AV) accessories offer a wide range of products that meet a variety of application requirements.
SpectrAlert® Advance color lens attachments are easy to install to any indoor or outdoor SpectrAlert® Advance strobe devices to provide distinctive visual signaling.
SpectrAlert® Advance horn strobes include a variety of features that increase application flexibility and simplify installation.
SpectrAlert® Advance 4-wire horn strobes include a variety of features that increase application flexibility and simplify installation.
SpectrAlert® outdoor selectable output speaker strobes provide a broad frequency response range, low harmonic distortion, and maintain a high sound pressure level at all tap settings to provide accurate broadcast of evacuation messages.
SpectrAlert® Advance strobes include a variety of features that increase application flexibility and simplify installation, such as field-selectable settings, including candela, and automatic selection of 12 or 24V operation.
Surface backboxes are for use with Fire-Lite® BG-12LR agent release stations.
System Sensor BEAMSMK are the surface mounting kit for the reflective projected beam smoke detector which are used whenever surface wiring is being used.
Surface-mount trim rings are for use with Silent Knight® remote annunciators.
The Swift Series Photoelectric Smoke Detectors are wireless multi-criteria detectors for use with the WIDP-WGI wireless gateway.
Farenhyt's Swift Wireless Relay Modules are wireless addressable devices which provide secure, reliable communication to the fire alarm control panel across a Class A mesh network.
System relay modules provides remote termination card with new software supplied in a remote mounting box and it allows reporting of any alarm or fault condition that appears on a VESDAnet loop regardless of the initiating zone.
The Tamper Proof Sampling Points (TPSP) provide an elegant addition to modern decor and can both minimize the risk of vandalism and tolerate abuse.
Turn latch locks are for use with Silent Knight® EVS-LOC local operator consoles. They are not intended for UL installations.
Unidirectional projection loudspeakers are high-performance, 10W or 20W public address speakers.
VSP-972 filters are spare filters for use with VEA aspirating smoke detectors.
The VSP-976 is a display front panel for VESDA-E VEA series of smoke detectors.
Xtralis spare front cover is use with the VESDA-E VES & VESDA-E VEP Aspirating Smoke Detector. It consist of plastic with 3.5in Display size.
The VESDA Modbus high level interface models links VESDAnet1 with PC software monitoring tools, building management systems (BMSs) or fire alarm control panels (FACPs). They are Type 2 models which have the echoing function is disabled.
VESDA VRT-500 is a Remote Mount Relay Module. It is designed for use with VLP, VLS and VLC detectors. The relay module is a 7 relay remote termination card with specialized software.
Xtralis the manufacturer of the market leading VESDA Aspirating Smoke Detection (ASD) technology has developed with its sister company
VESDA Sensepoints XCL are Micro Bore ASD System gas detectors come complete with the main detector unit (pre- installed with sensor cartridge), two cable glands, calibration/flow cap, flexible tube and tube clips to connect to VEA tubing.
VESDA Sensepoint XCL Micro Bore provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats.
VESDA Sensepoint XCL Replacement Filter
Replacement Sensor for VESDA Sensepoint XCL Detectors.
XCL-XRL-SC-H2 is a VESDA Sensepoint XCL/XRL replacement gas sensor for hydrogen gas.
Standard sampling points are designed for a ceiling with a void where micro bore tubes are run in the void and sampling points are mounted in the ceiling.
VESDA VIC Multi-function Control Cards are interface cards for the range of Xtralis VESDA VIC smoke detectors. They expands the range of input and output communications.
VESDA VLF remote display modules provide real-time indication of the status of a VESDA detector.
The VLI detector combines a fail-safe Intelligent Filter (patent pending) with an advanced clean-air barrier for optics protection allowing the use of absolute detection and a long detection chamber life without the need for recalibration.
VESDA Pipe and Fittings are part of an integrated system manufacturedfrom specialty plastics designed for use with most aspirating smoke detectionsystems, the VESDA VLP system in particular
The VRT-600 is a Remote Mount Display Module designed for use with the Laser PLUS range. Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display..
VESDA-E Filter Cartridge is field replaceable filter of VESDA-E detectors. It filters coarse particles
VSP-960 is used as a mounting bracket for VESDA-E.
VESDA-E Sampling Module
VESDA-E Series aspirator
VESDA-E Smoke Detection Chamber
VESDA-E VEA local relay StaX allow signaling of alarm locations from detectors via relays and provide mounting for fire panel loop input modules inside the enclosure.
The VESDA-E VEA series of detectors combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.
VESDA-E FRT COVER VEA-040-A00
VESDA-E VEA RA joiners are right angle joiners for VESDA-E VEA microbore tubes. They come in packs of 10.
VESDA-E VEA sampling point and microbore tube is fully supervised by the detector. VEA sampling points are available in two different type standard and surface mount. It can be used in Healthcare, Offices and Electrical cabinets.
VESDA-E VEA Series of detectors combine VESDA® reliability and early-warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.
VESDA-E VEA-40 Mounting Bracket is an accessory for VESDA-E VEA Local Relay StaX.
The VSP-971 are the smoke sensor modules for the VESPA-E VEA-40. The VESDA-E VEA series of aspirated detectors combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options.
VESDA-E VES Smoke Detector delivers a range of revolutionary features Flair Detection Technology that provide user value
VESDA® LCD Programmers are menu-driven, allowing the user to conveniently configure, commission, and maintain a VESDA aspirating smoke detection system, as well as program each individual detector.
VESDA® Modbus type 3 HLIs act as a proxy for all VESDA devices on the VESDAnet™ network, providing access to rich status information available from VESDA detectors, as well as the ability to control and configure these devices.
VESDA® pipes and fittings make up a network of dependable specialty piping that constantly and efficiently carries air samples from protected zones to highly sensitive detectors.
VESDA® VPS100/300 and power supplies are capable of providing operating power, including battery backup, for the entire line of VESDA by Xtralis® aspirating smoke detectors.
VESDA® filter cartridges are used to replace filter cartridges in VESDA VLC, VLF, VLP, and VLS detectors.
VP-CLIP 3/4-inch pipe support clamps are designed for use with VESDA® pipes. They are required for each five foot length of pipe.
VSP-030 filters are for use with VESDA® VLI intelligent detectors.
VESDA® VLI early warning aspirating smoke detection systems are designed to protect industrial applications and harsh environments up to 21,520 ft2.
VLI Secondary Foam Filter is an Internal secondary filter spare part for VESDA VLI.
VESDA SCREW COVER PK2
VPS-300US Power Supply provides power for: up to 3 VESDA VLP or Laser SCANNER detectors, or up to 15 remote (single box) units, or up to 3 sub rack assemblies.
Remote Mount Configuration is used for VESDA Display Unit
The VSM4 software product are valuable revenue generator for Xtralis distributors.
VSP-877 flush-mount sampling points provide a functionally and aesthetically improved alternative to the conical sampling points used in Xtralis® aspirating smoke detection (ASD) pipe networks.
Vesda Remote Mount Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators
VRT-900 includes blank plates with a remote mounting box and has 12 relay version for VLS.The Remote Box can house a single module with a termination card.
Vesda Test Transformers are previously known as the Hot Wire Test Power Supply Unit. They are used to test very early warning aspirated smoke detection equipment.
Pipe – 3⁄4”
The Visor ALARM® PLUS Receiver from Teldat™ is solution to manage and receive alarms from the Fire Watch™ IP series fire alarm communicators or Talgat's MIP™ IP communicators. Each Visor ALARM PLUS receiver supports up to 3,000 alarm panels.
W-USB SWIFT® transceivers can be used to conduct a site survey or to interface with all addressable wireless devices allowing for faster and easier configuration.
Wireless System Gateways by Honeywell are provides an efficient, reliable solution.
The X-SMART System Management Software includes a server-side system resource platform and a client-side management system to perform centralized management of related devices through an Ethernet network.
X-DA High Efficiency Power Amplifiers are the Class-D amplifiers and they are lighter, more stable, and high efficiency. The audio transmission is completely digitalized which makes it free from interference and easy to be controlled
The sensor covers are spares designed for VESDA Sensepoint XCL Micro Bore ASD System gas detectors.
Metric to Imperial Pipe Adaptors, Kit
Xtralis Smoke detector is an interface card for the range of Xtralis VESDA VLF smoke detectors. Multi-function Control Card expands the range of input and output communications a VLF detector can perform.
VEA provides assured detection through active sampling and end to end system integrity monitoring.
Honeywell's Xtralis Tamper Proof Sampling Points are a part of Aspiring Smoke Detection. They can minimize the risk of vandalism and tolerate abuse.
Xtralis VESDA Smoke Detection System Module allows direct access to all VESDAnet deviceson an VESDA smoke detection system.
The VESDA-E VEA Microbore tubes are custom made, high quality plenum rated flame retardant polyethylene tubes that are reliable long-term performance. They are lightweight and flexible for easy handling and installation.
The VESDA-E VEA series of detectors are used for early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.
The 24 switch Zone Expander Card used for emergency communication system.
Zone Expander RK-ZONE8
i³™ Series offers conventional smoke detectors with sounder, relay and isolator features included.
Start your search with category name, product name, part number, etc.
Copyright © 2023 Honeywell International Inc.