The A/WPR2 Series Remote Wet to Wet Differential Pressure Transmitter is designed to reduce installation time and provide mounting flexibility, often eliminating the need for additional plumbing.
AFS Series Differential Pressure Switches is designed for both HVAC and Energy Management applications & These pressure switches can be used to sense positive, negative, or differential air pressures when used in conjunction sampling tube.
The Advanced Pressure Monitors are flexible, touchscreen local display units that measure pressure, temperature, humidity, and air change rates for pressurized spaces with the purpose of ensuring proper ventilation and airflow.
The ACI DLP Series Differential Low Pressure is based on a piezo resistive, silicon sensing element which senses Differential Pressure and provides an analog output.
Differential Pressure Switches are adjustable vacuum, pressure and differential pressure switches designed for both HVAC and Energy Management Applications.
This universal pressure switch can be used in general mechanical engineering and the printing machine industry, as well as in pneumatics and hydraulics.
The DLP Series Differential Low Pressure Sensor is based on a piezo resistive, silicon sensing element which senses Differential Pressure. The hinged cover on the DLP can be easily opened using the integrated locking tab.
Differential pressure switches for filter, fan or air flow monitoring in air conditioning and ventilation systems, tested according to the EC Gas Appliance Directive EU/2016/426 and DIN EN 1854
Differential pressure, vacuum, and overpressure switches suitable for monitoring neutral and slightly aggressive liquids and non-flammable gases. It can also be used as a flow switch if fitted across an orifice plate.
Honeywell DPSN series differential pressure switch is used in monitoring air duct filtration the status of nets, fans and airflow.
DPTA series differential pressure transmitters are used to monitor gaseous, non-aggressive media.
DPTE series differential pressure transmitters are used to monitor gaseous, non-aggressive media.
The DTI (2-Wire) and DTU (3-Wire) Differential Pressure Transmitters are suitable for measuring differential pressures in liquid and gaseous media. They operate according to the piezo-resistive measuring principle.
Especially suitable as a pressure limiter for fuel gases (DVGW work sheet G 260) and liquid fuels, as well as for steam systems according to TRBS and hot water systems to DIN EN12828, systems in accordance to DIN EN12952-11 and DIN EN12953-9.
Especially suitable as a pressure monitor for fuel gases (DVGW Worksheet G 260) and liquid fuels, as well as for steam systems according to TRD 604 and hot water systems to DIN EN12828, systems in accordance to DIN EN12952-11 and DIN EN12953-9.
The Gage Pressure Transmitter Series is a 2-wire gage pressure transmitter. The gage pressure transmitters come in two pressure sensing type conventions, Vented Gage (15 to 300 psi) and Sealed Gage(500 to 1,000 psi).
The A/LP2 Series pressure transmitters incorporate a durable piezoresistive sensing element to enable low pressure measurements. Integrated temperature compensation with offset and span calibration enhances the performance of these devices.
The MLP2 Series Low Differential Pressure transmitters are designed for use in OEM or high density panel mounting applications.
The MLP2 Series Low Deferential Pressure transmitters are designed for use in OEM or high density panel mounting applications.
From the fully featured P7660 to value-priced accuracy and performance of the P7645, Honeywell dry pressure sensors allow flexibility in mounting and easy installation.
Honeywell provides P7620C series ceramic cell differential pressure transmitters and transducers for most industrial pressure measurement applications at high qualityperformance and precision accuracy requirement.
The PTI (2-wire) and PTU (3-wire) pressure transmitters are suitable for measuring the relative pressures in liquid and gaseous media.The output signal is either an analog current signal (PTI) or voltage signal (PTU).
The Room Pressure Indicator (RPI) is designed for critical pressurized spaces that monitors the differential pressure between a pressurized space and an adjacent corridor, or between two pressurized spaces.
These series are particularly suitable for maximum pressure monitoring in steam and hot-water systems. The pressure switch is "of special construction", with a self monitoring pressure sensor, built in accordance with PED 2014/68/EU.
The microprocessor supported differential pressure transmitters in the Smart SN DIFF series from Honeywell FEMA measure differential pressures and relative pressures in 6 pressure ranges from 0-100 mbar to 0-20 bar.
Smart SN Microprocessor supported pressure transducers
Honeywell's uni-directional pressure transmitters uses a high quality, variable capacitive pressure sensor in each of the units. These are low differential pressuretransmitters are offered in ranges from 0 to 0.25” up to 0 to 10” WC.
The ACI WPR2 Series Remote Wet to Wet Di erential Pressure Transmitter is designed to reduce installation time and provide mounting exibility, often eliminating the need for additional plumbing and manifolds.
Start your search with category name, product name, part number, etc.
Copyright © 2023 Honeywell International Inc.