The enclosure has a glazed lockable door and an internal swing frame to allow easy access to the back of the sub rack.
5820 Firefighter Key
The ACS-Series Annunciator and Control System provides arrays of LEDs to indicate point status, zone status, system status, and ability to perform system reset, silence, acknowledge and drill
The Dress Panel for one touchscreen display and two ACM-30 annunciators to be mounted in a CAB-5 Series cabinet
Flush-mount boxes are for use with Fire-Lite® ACS Series annunciators. These enclosures provide remote mounting of a single annunciator module.
Key lock door for recessed mount is an accessory for emergency telephone stations.
ANN-MBRLY mounting brackets are for use with NOTIFIER® NFW2-100 fire alarm control panel (FACP) applications.
The ANN-80 annunciator is a compact, backlit, 80-character LCD fire annunciator that mimics the Fire Alarm Control Panel (FACP) display provides system status indicators for AC Power, Alarm, Trouble, Supervisory, and Alarm Silenced conditions
Accessories are designed exclusively for IQ8Quad Series Detectors.
Annunciator Key Switches provide access security for the control switches on the LCD-160. Key-switch kit includes key, hardware, and an annunciator label.
The Annunciator Surface Box provides for the remote mounting of one annunciator module in a surface-mount enclosure. Knockouts are provided for use with 1/ 2" (1.27 cm) conduit. The annunciator mounts directly to the ABS-1B/C without a dress plate.
The Annunciator Surface Box-2B (black) provides for the surface mounting of one ACM-24AT/AEM-24AT combination or one ACM-48A/AEM-48A combination.
B-Sized marine cabinet comes with 12 gauge steel door and 6 gauge black box. These cabinets are available with a Notifier logo.
Backboxes are for use with fire alarm control panels (FACPs) and are used to mount up to two batteries and power supplies.
Blank Module Dress Plate used to cover annunciator positions or panel positions and also mounts some option modules.
Blank Module Plates by Notifier are cover unused module positions in an annunciator backbox also included four stand offs which allows option modules to mount behind the black front, or inside the cabinet.
All cabinets for NOTIFIER fire alarm control panels are fabricated from 16-gauge steel. The cabinet assembly consists of two basic parts: a backbox and a locking door.
C4 Cabinet Backbox are available in black or red. This selection provides a stylish combination to accent the décor of the finest lobby setting.
Blank plate for CA-2 chassis
CAB-4 Series Semi-Flush-Mount Accessory Trim Rings are used for mounting accessories in Notifier's Fire Alarm Control Panel cabinet assemblies.
Notifer brings CAB-4 Series Audio Command Doors that are designed to be used with CA-2 chassis mounted in top two rows.
CAB-4 Series Cabinet for NOTIFIER fire alarm control panels are fabricated from 16-gauge steel
DR-B4 is Two Tiers, “B” Size CAB-4 Series Cabinet for NOTIFIER Fire Alarm control panels.
CB-1 Chassis Bridge provides a bridge between CHS series chassis.
CHS-4L chassis are for use with NOTIFIER® fire alarm control panels (FACPs). They are low-profile, 4-position chassis and mount two AA-30 amplifiers.
Compact 24hr inner door assembly
DP-51050 dress panels are for use with Fire-Lite® MS-5UD/MS-10UD Series fire alarm control panels (FACPs). They restrict access to the system wiring but allow access to the membrane switch panel.
The DVC Series Dress Panels by NotifierR are part of Digital Voice Command or DVC.These dress panels play the role of mounting the DVC with CA-1 chassis when CMIC-1 microphone is not used.
The DXc Blank Covers are a part of cover kits for DXc series control panels.
DXc custom key plate cover kit accessories are used to replace the blank cover supplied with the DXc2/4 control panels or used with the extension back box.
The Morley IAS DXc Flush Bezel Kit used for Morley IAS DXc2 or DXc4 panel and the kit includes additional extension back box. Extension box is used to accommodate larger batteries, relays or other equipment.
DXc replacement door is available for DXc control panels. This replacement door is fits with all three variants of the panel, DXc1, DXc2 & DXc4 and is supplied complete with display PCB, fascia label, ribbon cable and lock.
DXc1 rack mounting kit accessories are used for DXc1 one loop fire alarm control panels.
Door Holder Floor Plate is use for fixing door holder at right angle to floor.
Door Plate Assembly (Spare) is Door Keeper Plate in two pieces.
DPA-1 is the Dress panel that can be used with the CA-1 chassis when configured with a DVC, DVC-KD, and CMIC-1.
Dummy plate is used to install fire stations DCSF12 or DCSF1 in the upright cabinets
Use an End-of-Line device with control panel releasing circuits.
Expansion housing for DXc series BMZ
Fire detector protective cover helps prevent malicious or accidental false fire alarms. This unique device has helped prevent false fire alarms around the world for decades.
The FFT-STSS and FFT-STSR are compatible with the Fire Fighters Telephone communication system. The FFT-STSS is a surface mount door with keylock. The FFT-STSR is a` recessed mount door with keylock
TR-CE trim ring assemblies are for use with Gamewell-FCI® Flex six-zone fire alarm control panels (FACPs). They allow semi-flush mounting of the cabinet. Red and black options are available.
Flush Fixing Kits are flush mounting plate for Gent Xenex conventional fire detection panels
Flush Surround for Gent Compact Panel
The D4 Series Cabinets are designed to house the Gamewell-FCI’s, E3 Series® Classic Emergency Voice Evacuation AA Series amplifiers and Honeywell Power Products’ Chassis Power Supplies. These cabinets are constructed from 16-gauge steel.
Graphic Annunciator Dress Plates are used when the 10" graphic display is mounted in the top row/except top row of a CAB-4 Series cabinet.
Sampling Hole Clips are designed to alleviate such potential issues, by providing a clear, visual indication of sampling point location and its associated hole size.
Housing surface mount, white
IQ8Wireless cover for wireless interface, red and white
The NFS-320 intelligent Fire Alarm Control Panel is part of the ONYX® Series of Fire Alarm Controls from notifire.using NFS-320C, an optional ACM Series annunciator can be mounted in the same cabinet.
M200 Addressable Modules Mounting Box with 20mm knockouts, consists of white plastic back and a black transparent cover.
Module housing for top-hat mounting rail
Mounting plate used to attach backboxes of listed fire alarm control panels and power supplies to the CAB-BM.
Mounting set is used for mounting the air duct construction set to round and/or insulated air ducts.
Mounting bracket is used for alignment of the industrial heat- and flame detectors UniVario. Simple installation with base Part No. 783313.
Mounting kit for ALR microphone Part No. 581316.
Mounting rail for FACP
Mounting rail set for connection terminals
Notifier Retrofit Mounting Kit is used for mounting the NCA-2 Network Control Annunciator to a DPDISP dress plate.
NFS2-3030 is an intelligent Fire Alarm Control Panel (FACP) designed for medium- to large-scale facilities. CPU2-3030ND is one of the main component of this system. It is also known as display of the system.
Replacement door used for mounting ACPS-610 (E) in a CAB-PS1 cabinet when replacing ACPS-2406
The backbox has been engineered to provide ease-of-entry for the installation of the fire alarm control panels.
The Battery Plate used to cover battery and power supply when lower position is used in backbox.
TR-ABS is a Back Boxes which provide an enclosure for remote mounting it can be surface or semi flush mounted.
ONYX FirstVision™ backbox enclosure and door is used for perfect and secure mounting of ONYX FirstVision™ Interactive Firefighters’ Display system.
Backbox by Notifier has been engineered to provide ease-of entry for the installer.
The LEXAN model provides a tasteful combination to accent the decor of the finest lobby setting.
The Onyx Series Surface Mount Backboxes are an attractive range of backbox for mounting one ACS Series Annunciators. They have an increased depth that allows mounting of the AKS-1B Annunciator Key Switches.
BB-XP is an Optional cabinet for one or two modules.
Surface-mount backboxes are for use with Fire-Lite® ACM-8RF relay modules.
Remote mounting kits are for use with Silent Knight® 5815XL signaling line circuit (SLC) expanders.
Replacement Inner Door for VIGPLUS-24 and VIGPLUS-72 (supplied in Black)
S-Quad Duct Mounting Brackets are designed for the S-Quad Duct Smoke Sensor. They are available to mount the detector on circular and insulated ducts.
SK-SCK seismic compliance kits are for use with Silent Knight® fire alarm control panels (FACPs).
Seismic Mounting and Bracket Kit
Supporting rails for wall mounting
Trim Ring is grey surface mounting for 5860 and RA-1000 remote annunciator.
Trim Ring Accessory includes a semi-flush-mount trim ring which is two tiers.
Trim ring for the NFS-320 intelligent addressable fire alarm control panel cabinet.
VARIODYN D1 Comprio 4-8 net (with Ethernet)
Remote Mount Configuration is used for VESDA Display Unit
19in rack enclosures are designed to house up to 20 display and programmer modules in a wide variety of configurations to suit the particular requirements of a site where centralised control and monitoring of the VESDA system is required
Outer Door Assembly for Gent Vigilon Compact control panel
XLS-ADDR Door Assemblies are designed for use with the CA-2 chassis configuration. XLS-ADDR Door Assemblies are available in two, three and four tiers.
ZXSe Mounting Brackets are 'L’ shaped to fit peripheral pcb’s into Zxe/ZX5e/ZXSe
Start your search with category name, product name, part number, etc.
Copyright © 2023 Honeywell International Inc.