Asia Pacific
Europe
Middle East
North America
The 3--way Connector Incl. Connecting Cables by Esser provides connection to three power supply modules simultaneously so as to connect these supply modules to a 230V ac line.
Farenhyt Addressable Dual Relay Modules are designed for Form C switching applications which do not require wiring supervision for the load circuits. They are equipped with two individual relay control modules and two Class B monitor modules.
Control Module supervise a circuit of dry-contact input devices, such as conventional heat detectors and pull stations, or monitor and power a circuit of two-wire smoke detectors.
Conventional Zone Monitor Modules provides an interface between a zone of conventional detectors and an intelligent signaling loop. Monitor modules monitors the conventional zone and transmits the zone state to the panel.
Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators.
Monitor modules supervise a circuit of dry-contact input devices, such as conventional heat detectors and pull stations, or monitor and power a circuit of two-wire smoke detectors.
End-of-Line module EOL
Farenhyt addressable monitor modules are used with fire alarm control panels. They acts as an interface to contact devices and has attractive ivory cover plate and rotary address switches for fast installation.
Single loop modules for up to 127 Series 9200/IQ8 Quad intelligent fire detectors or bus devices, subdivisible into 127 detection zones
IDP addressable dual monitor modules are intended for use in intelligent, 2-wire system Farenhyt™ fire alarm control panels (FACPs).
IDP intelligent addressable monitor modules are intended for use in an intelligent alarm system. Each monitor module is intended to interface between a control panel and normally open contact devices, such as pull stations.
IDP-Minimon is a compact and light weight addressable monitor module for use with Silent Knight IFP-series fire alarm control panels (FACPs). The IDP-Minimon acts as an interface to contact devices, such as waterflow switches and pull stations.
Four different monitor modules are available for Honeywell’s intelligent control panels for a variety of applications. Monitor modules supervise a circuit of dry-contact input devices
Network Control Display requires a network communications module for networking. In direct connect applications, the NCM is not required.
Gateway PC Card is an intelligent gateway interface for the ONYX works® fire monitoring workstation. It supports full panel programming and network diagnostics. It is also support wire or multimode fiber options.
Intelligent addressable firephone control module, the FTM-1 provides the Fire Alarm Control Panel capability to monitor and control a circuit of up to two firefighter phones.
Redundant control module for FlexES Control
Remote Display Module is designed for use with the Laser compact range and it provides real-time indication of the status of a VESDA detector.
Remote Mount Display Modules provides real-time indication of the status of a VESDA detector.
Remote Mount Display without Relay is a VESDA Laser Industrial (VLI) remote display module containing high-intensity, flashing Alarm light-emitting diodes (LEDs).
Remote Mount VLF Display Unit designed for use with the Laser Focus range and provide real-time indication of the status of a VESDA detector.
Remote Scan display provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators.
Remote VESDA VLC Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators.
Multi-mode and single-mode fiber-optic modules are plug-in fiber loop modules that work as a single channel to transmit or receive communications with Silent Knight® network interface cards.
Six Circuit Supervised Control Modules by Farenhyt are intended for use in an intelligent alarm systems for AC or DC switching applications which requires wiring supervision.
System relay modules provides remote termination card with new software supplied in a remote mounting box and it allows reporting of any alarm or fault condition that appears on a VESDAnet loop regardless of the initiating zone.
The TC841A Monitor Module is intended for use in intelligent, addressable systems, where the individual address of each module is selected using built-in rotary switches.
VESDA VIC Multi-function Control Cards are interface cards for the range of Xtralis VESDA VIC smoke detectors. They expands the range of input and output communications.
VESDA VLF remote display modules provide real-time indication of the status of a VESDA detector.
The VRT-600 is a Remote Mount Display Module designed for use with the Laser PLUS range. Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display..
The VESDAnet Interface Card (VN Card) is a simple interface card for the range of VESDA VLF by Xtralis aspirating smoke detectors.
VESDA® VLP Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators.
