5865-3 and 5865-4 LED annunciators provide 30 programmable LEDs (15 red, 15 yellow) for maximum flexibility with the Honeywell Silent Knight® Series fire alarm control panel (FACP).
7075 Series Remote Annunciators are used to operate and program IFP-series fire alarm control panels. The remote annunciators connects to the fire alarm control panel via the RS-485 system bus.
The Backlit LCD annunciator for the Notifier fire alarm control panels, or network control annunciators that support the 80-character display format. LCD annunciator may be connected onto the four-wire EIA-485 terminal port.
Flush-mount boxes are for use with Fire-Lite® ACS Series annunciators. These enclosures provide remote mounting of a single annunciator module.
The ACS-Series Annunciator and Control System provides arrays of LEDs to indicate point status, zone status, system status, and ability to perform system reset, silence, acknowledge and drill.
Expand the versatility of the InnovairFlex™ line of duct smoke detectors with System Sensor notification and test accessories.
The Annunciator provides a mappable relay output module for Fire Alarm Control Panels, and for NCA-2 Network Control Annunciators.
Notifier FDU 80 Series Liquid Crystal Display are compact, cost-effective, 80-character, backlit LCD remote Fire Annunciator for use with the NOTIFIER FireWarden Fire Alarm Control Panels (FACPs).
LED Annunciator Module with alarm (red) indicators is used for up to 30 input zones or addressable points. N-ANN-RLED has red LEDs only for alarm communication.
LED Driver Board for Special Mimics-Vigilon Custom Mimic LED Driver Card
The LDM Series lamp driver modules with a custom graphic display, provides annunciation and control for Fire Lite’s intelligent fire alarm control panels
The Lamp Driver Module with a custom graphic array used to indicate point status and, in some versions, to control the state of output points
LCD-160 is a 640-character Liquid Crystal Display (LCD) annunciator and remote control for the NOTIFIER NFS-3030/NFS2-3030
The N-ANN-80 annunciator is a compact, backlit, 80-character LCD fire annunciator that mimics the Fire Alarm Control Panel (FACP) display. It provides system status indicators for AC Power
The N-ANN-LED annunciator module provides LED annunciation of general system faults and input zones/points when used with a compatible Fire Alarm Control Panel (FACP).
These annunciator are compatible for use with ONYX® Series nodes such as the NFS2-3030, NFS-3030, NFS-320, NFS-640 and NFS2- 640 fire alarm control panels, as well as first-generation NCA Network Control Annunciators.
ONYX FirstVision™ Interactive Firefighters’ Display graphically displays critical information on the origin and spread of a fire, allowing firefighters to quickly locate and extinguish it.
ONYX® Series Network Control Annunciator provides system control and display capabilities for all, or for selected network nodes. It requires a network communications module for networking.
Fire Systems Command Interface by Honeywell is the next generation in life safety management for centralized control and monitoring of the fire alarm system.
ONYX® Series Network Control Annunciators are second-generation Network Control Annunciator provides system control and display capabilities for all, or for selected network nodes.
RA-2000 remote annunciators are used to operate and program Silent Knight® Farenhyt™ Series fire alarm control panels (FACPs).
Surface-mount backboxes are for use with Fire-Lite® ACM-8RF relay modules.
Remote Annunciators by Silent Knight are used to operate & program the IFP -100 OR IFP -1000 Fire Control Panels.
The Remote annunciator mounts on a standard single gang box, and provide LED indication of the same functions as the 4XZM zone relay module.
Remote annunciators are designed for both conventional and intelligent applications. Their red LED provides visual indication of an alarm condition.
Start your search with category name, product name, part number, etc.
Copyright © 2022 Honeywell International Inc.