Mains Switching interface units offers heavy duty relay switching for both 24V and 230V applications with contacts rated at 13A suitable for switching damper control units and other building controls requiring high contact rating for mains shutdown.
Connection terminal for UBext
D1 PAMMI Plus Redundant Selector Switch
Farenhyt IDP-Zone-6 is an addressable zone interface module for use with Silent Knight IFP-series fire alarm control panels (FACPs).
Honeywell's farenhyt two wire interface modules have been designed for use with Silent Knight IFP-series fire alarm control panels (FACPs).
Field Bus Interface Plus is used for interfacing for the programming of the FACP 8007, 8000 C/M, 8008, gateway, ABIGA and Extinguishing Control Panels 8010 or for the direct field-side connection of a single installed loop.
These S4 Single Output Interfaces are designed for use with any Vigilon/34000 fire alarm control panel. Each module includes loop isolators for device isolation.
Network interface modules for up to 16 resp. 31 network nodes for FlexES Control.
IQ8Wireless universal interface w/o cover
Low Voltage Input /Output Vigilon Interface Module used to control a resistive load of up to 1A at 30Vdc/ac via a set of single pole change over contacts. Also allow the monitoring of the external equipment.
Loop Isolator Module LIM
The PW Series are RS232/M-Bus converters which act as master interfaces for M-Bus networks with 3/20/60 slaves
S4 Input Interface modules are used to link the fire alarm system to other plant management devices such as sprinklers and security systems. They can also be used to link to a zone of conventional detectors.
S4 Interface Modules 4-Input / Output Interface Module are designed for use with Vigilon and 34000 fire alarm control panel
The S4 Single Output Interfaces are suitable for mains switching, they provide normally closed and normally open contacts rated at 13A 250Vac (nominal 230Vac) resistive load.
SK-NIC network interface cards work with fire alarm control panels (FACPs), allowing FACPs to connect to one another through broadband networks.
The N-ANN-S/PG Interface module connects either a serial or parallel printer with a compatible Fire Alarm Control Panel (FACP) to print real-time logs of system events, detector status reports, and event histories.
TCP/IP converter, Ethernet RS232 / RS485
Universal Interface Module UIM
VESDA® VHX-0200 Sliding Windows high level interface (HLI) models enable connections between a VESDAnet™ (a communications protocol that allows devices to communicate on one network) and configuration/monitoring platforms.
VESDA Wall-Mounted Modbus High Level Interface (HLI) links your VESDAnet1 with PC software monitoring tools, Building Management Systems (BMSs) or Fire Alarm Control Panels (FACPs).
The VESDAnet Interface Card (VN Card) is a simple interface card for the range of VESDA VLF by Xtralis aspirating smoke detectors.
VESDA® Modbus type 3 HLIs act as a proxy for all VESDA devices on the VESDAnet™ network, providing access to rich status information available from VESDA detectors, as well as the ability to control and configure these devices.
Honeywell provides VHX series high level interfaces which links your vesdanet1 with pc software monitoring tools, building management systems and fire alarm control panels.
The VESDA VLI by Xtralis is an industry first early warning aspirating smoke detection (ASD) system, designed to protect industrial applications and harsh environments of up to 2000 m2 (21,520 sq. ft.)
Gent by Honeywell introduces Vigilion's Loop Powered Interfaces and other devices which can accommodate a high quantity of loop powered interface units offering flexible range of inputs and outputs from the FD&A system.
Start your search with category name, product name, part number, etc.
Copyright © 2023 Honeywell International Inc.