I/O Modules
PCD7.L320 Analog Input Module with 8 universally configurable inputs
The RIO module with 8 with 8 individually configurable resistance or voltage inputs was developed as a SBC S-Bus data node for peripheral measuring.
Overview
The RIO module with 8 with 8 individually configurable resistance or voltage inputs was developed as a SBC S-Bus data node for peripheral measuring. Via a PLC of the type PCDx / PCS1 temperatures from different passive and active temperature sensors (e.g. PT100, PT1000, NI1000, NTC-10k, KTY81-110, LM235 etc.) and/or voltages of 0…10 VDC can be read. Two address switches (×1 / ×10) on the front panel allow module addressing and identification.
Addresses can be set between 00 and 99. Up to 100 RIO modules and a maximum of 3 PCD stations can be connected to one bus branch simultaneously. If the bus cycle time is critical, fewer than 30 slaves should be operated in one segment.
Addresses can be set between 00 and 99. Up to 100 RIO modules and a maximum of 3 PCD stations can be connected to one bus branch simultaneously. If the bus cycle time is critical, fewer than 30 slaves should be operated in one segment.
