Optical Smoke Detector ES Detect with Relay Contact

Threshold value detector with relay contact 800361.10 for object monitoring, comprises an optical smoke detector 800371 from the ES Detect Series and a detector base 805592 which enables a direct connection to a 48 V DC power supply. The detector therefore does not need to be operated in connection with a fire alarm control panel. If the detector detects a fire alarm, a floating relay contact activates to transmit the alarm. The relay contact is normally closed (NC) by default, but can also be configured as normally open (NO) with a solder strap on the circuit board base. The smoke detector of Series ES Detect used in the detector base can be reset manually or automatically by a short interruption (4 seconds) of the detector voltage. A typical use for this detector is to monitor mobile communication stations, e.g. BTS base transceiver stations.

• Optimally matched to the ES Line system
• With multisensory detectors for the detection of all fires, even under the most difficult operating conditions
• Up to 30 detectors per detection group
• Uniform response sensitivity of the detector for all different types of fire for the multisensory detectors
• Automatic self-monitoring of the detector electronics
• Automatic self-monitoring of sensors for function and condition
• Hours of operation, alarm and fault counter in each detector
• Socket adapter for ceiling installation
• Dust caps optional for fire detectors and detector base
• Kit for suspended mounting

• EN 54-7