Alarms, audible and visual alarms, water flow indicators and others

System Sensor L-Series speakers reduce costly ground faults using a plug-in design and universal mounting plate that allow the installer to pre-wire mounting plates, dress the wires, and confirm wiring continuity before plugging in the speakers.

CO1224T carbon monoxide (CO) detectors with Real Test® use a highly accurate and reliable electrochemical sensing cell to provide an early warning of dangerous CO levels.

SK-NIC network interface cards work with fire alarm control panels (FACPs), allowing FACPs to connect to one another through broadband networks.

FFT-24 expander boards allow an additional 24 zones to Silent Knight® fire fighters telephone control systems.

Multi-mode and single-mode fiber-optic modules are plug-in fiber loop modules that work as a single channel to transmit or receive communications with Silent Knight® network interface cards.

Backboxes are for use with fire alarm control panels (FACPs) and are used to mount up to two batteries and power supplies.

Remote annunciators are designed for both conventional and intelligent applications. Their red LED provides visual indication of an alarm condition.

5600 Series mechanical heat detectors offer property protection against fire and are intended for non-life-safety installations where smoke detectors are inappropriate.

The B200SR sounder and LF sounder bases are fully compatible with existing B501BH Series sounder base installations. The device enables users to select one of two B501-supported tones (ANSI Temporal 3 or Continuous) through a jumper.

L-Series horns are designed to simplify installations to provide primary and secondary signaling for fire and security applications.

The DST family of sampling tubes are pieces of steel piping with a series of holes drilled the entire length of the tube and should extend the entire width of the duct.

i³™ Series offers conventional, photoelectric and photo/thermal smoke detectors in both 2-wire and 4-wire formats.

L-Series Surface Mount Back Boxes are the best solution in locations where you have a hard surface to mount to.

L-Series LED 2-wire horn strobes are rich with features that increase application versatility, simplify installation, and maximize profits with lower current draw and modern aesthetics.

L-Series LED 2-wire horn strobes are rich with features that increase application versatility, simplify installation, and maximize profits with lower current draw and modern aesthetics.

SpectrAlert® outdoor selectable output speaker strobes provide a broad frequency response range, low harmonic distortion, and maintain a high sound pressure level at all tap settings to provide accurate broadcast of evacuation messages.

SpectrAlert® Advance Series horns are designed to simplify installations to provide primary and secondary signaling for fire and security applications.

SpectrAlert® Advance Series mini-horns are designed to simplify installations to provide primary and secondary signaling for fire and security applications.

B224RB Detector Relay Bases are designed for use with 200 Series detectors, and provide a single Form C contact relay for the control of auxiliary functions, such as door closures and elevator recall.

B224BI Plug-in Isolator Detector Bases prevent an entire communications loop from being disabled when a short circuit occurs.

System Sensor BEAMSMK are the surface mounting kit for the reflective projected beam smoke detector which are used whenever surface wiring is being used.

SSM Series alarm bells are low-current, high-decibel notification appliances for use in fire and burglary systems or other signaling applications.

Single Terminal Back Boxes are used for mounting RTS151 key. Remote annunciator accessories providing reset function and has a Red LED to indicate alarm conditions.

Surface backboxes are for use with Fire-Lite® BG-12LR agent release stations.

Serial and parallel gateway modules allow you to connect virtually any standard PC-compatible printer to a Silent Knight® Series fire alarm control panel (FACP) and to generate reports on site.

5820XL LED I/O driver modules provide an effective means to customize your remote annunciation. They provide LED annunciation and control inputs for the fire alarm control panel (FACP).

The printer is used with the Gamewell-FCI fire alarm control panels (FACPs) and provides printer capability to produce a written record of system events and status changes.

Remote mounting kits are for use with Silent Knight® 5815XL signaling line circuit (SLC) expanders.

Surface-mount trim rings are for use with Silent Knight® remote annunciators.

005860T surface-mount trim rings are for use with Silent Knight® 5860 remote annunciators. Red and gray options are available.

KILLARK® XAL-53 explosion-proof pull stations are suitable for use in hazardous areas due to the presence of flammable gases or vapors, combustible dust, or easily ignitable fibers.

005883 relay interface boards provide 10 general purpose Form C relays that can be used to control any device that requires a dry contact closure.

FFT-FPJ firefighter phone jacks provide a quick connect to the SK-FFT fire fighter telephone system using an FFT-RHS remote handset.

SB-I/O surface-mount backboxes are for use with Silent Knight® PS-SA and PS-DA pull stations.

302 Series rate-anticipation heat detectors operate within a controlled range of two to three degrees of their setpoints, regardless of the rate of temperature rise. These detectors are available in either 135 °F (57.2 °C) or 194 °F (90 °C) ratings.

L-Series LED strobes are rich with features that increase application versatility, simplify installation, and maximize profits with lower current draw and modern aesthetics.

L-Series LED strobes are rich with features that increase application versatility, simplify installation, and maximize profits with lower current draw and modern aesthetics.

FFT-HSC Firefighter handset cabinets can hold up to 10 remote handsets.

Sync-Circuit Modules synchronize SpectrAlert Advance strobes, horns, and chimes over a single pair of wires.

System Sensor Select Series detector color kits offer expanded color options to meet varying aesthetic applications.