For the serial essernet interface for a length up to 15 m.

Amplifiers Output Cables DOM

The mA Input module has a maximum detector current supply of 500mA and the supply voltage from the controller is 18V DC.

Service key for electronic module (Part No. 80490x)

Replacement mA display module for touchpoint controllers.

796-169

Contact Interface Module CIM

The Loop module esserbus-Plus is a powered loop technology for reliable fire protection with maximum security and minimum cost.

Module in plastic protective housing for connection of an esserbus / esserbus-PLus loop, but with galvanic isolation (GI).

GMT 4000 Repeater Panel

Esser LCD Indicator Panel includes 10 Programming Interfaces, Internal Buzzer, Programmable Relay.

CAT5 Patch 1 m Cable available in gray color which can be used for DAL and Ethernet.

IDC Lead is used to display to Input Module and Interconnect Cables are required to connect input module to input module.

The basic module carrier forms part of the fire alarm control panel's basic structure.

Detector and AV standard base are low profile standard intelligent detector and AV devices which are Ivory based. Screw connections for cablings up to 2,5 mm, tamper option and address identification label.

VSP-972 filters are spare filters for use with VEA aspirating smoke detectors.

Cables for Cabinet Rear Panel are used for prefabricated cabling of the 100 V outputs of DOM4-8 and DOM4-24, 1 and 4 piece can be connected respectively.

Backup cable RC 22 VARIODYN D1

Backup cable RC 44 VARIODYN D1, 1,2 m

Overvoltage protection modules

Variodyn D1 Input Cabling

Keyboard Cover for DCS VARIODYN D1 call station is a transparent key cap to protect from accidental key presses. So, pressing the keys is only made possible with an open cap.

Digital Key Module DKM18 for redundant call stations

Intevio extension keypads are for use with remote call stations. Models available with four function buttons/LED indicators, and eight function buttons/LED indicators.

Protective housing with protruding roof edge by Esser is for all Part No. 7047xx and 7048xx detector housings. It gives an increased mechanical protection as well as protection from bad weather conditions.

DXc 2 loop base card - Morley Protocol

The visual action indicator is used for the rapid localization of detectors in alarm in inaccessible places (ventilation, false floors, false ceilings, attics, etc.).

The DX Connexion is an enhancement of the Morley-IAS Dimension panel range. The DX Connexion Panel series also include the modular unit PCB and Base Card.

Intelligent addressable IQ8Alarms are addressable, completely bus supplied and short circuit / open circuit resilient alarm signaling devices for optical alarm signaling.

ZxSe Replacement Softwares comes with intelligent, sophisticated features like AUTOLEARN which aid with the initial system installation

1-loop Fire Alarm Control Panel

7724-CPU

The ECO1005 thermal detector belongs to System Sensor’s ECO1000 range of detectors. ECO1000 is a range of conventional detectors produce latest manufacturing technology and supplied with an array of advanced features, making them ‘better by design’.

VESDA® VLI early warning aspirating smoke detection systems are designed to protect industrial applications and harsh environments up to 21,520 ft2.

VESDA VLI Smoke Detectors by Xtralis is first early warning aspirating smoke detection (ASD) system, designed to protect industrial applications and harsh environments, combining a fail-safe Intelligent Filter with an advanced clean-air barrier .

Field Bus Interface Plus is used for interfacing for the programming of the FACP 8007, 8000 C/M, 8008, gateway, ABIGA and Extinguishing Control Panels 8010 or for the direct field-side connection of a single installed loop.

Loop Isolator Module LIM

WCP1A Outdoor Call Point range gives you installation efficiency, flexibility and full compliance with the latest standards. The WCP1A series is supplied with both a resistor and normally open clean contact electrical options.

Call station 586309 is designed to maintain duplex communication between the operator of the VoCALL system and the subscriber on the side of the outdoor panel.

Wall-surface mount terminal box for DCS

Essernet Micromodules are a network interface module such as essernet module, however it is used for max. 31 network participants.

The Honeywell wall mounting brackets are used for mounting single channel gas detector controller.

Esserbus transponder is a refurbishment zone transponder for the fire alarm system 8000, IQ8Control and FlexES Control FACPs. Transponder generates 24V DC detector zone voltage inside the module.

Unidirectional Projection Loudspeaker by Honeywell it can be used in indoor, outdoor, dry, or wet applications, providing reliable operations over wide temperature and humidity ranges.

Ethernet Touch Call Station

Doormaster-Smart-PAL-Telephone interface

VARIODYN® D1 Power Amplifiers are required for the voice alarm system in class D technology with four independent power channels and galvanic isolated 100 V direct outputs, symmetric inputs, inrush current limitation and soft start.

Input Version is present in mA.

System Communication Unit SCU

Ceiling Loudspeaker is a cost-competitive ceiling loudspeaker which has an excellent audio performance and aesthetic appealing enclosure. This full range loudspeaker features a high sound pressure level and a wide frequency response range.

PAMMI Plus Server application realizes system control and communication with the components of the VARIOIDYN D1 voice alarm system and the PAMMI Plus client via Ethernet.

PC Touch Screen Call Stations are designed for use in front of house environments or complex buildings & Its Combined with the PAMMI plus software the user has an intuitive tool for creating announcements with graphical display of the site and zones.

Desk Station with DGM1 Pre-Chime System in an elegant housing with 1 labelable key with LED display for key control and busy / operating / gong display and Cardioid gooseneck microphone in electret condenser technology.