SpectrAlert® outdoor selectable output speaker strobes provide a broad frequency response range, low harmonic distortion, and maintain a high sound pressure level at all tap settings to provide accurate broadcast of evacuation messages.

SK-NIC-KI accessory install kits are for use with Silent Knight® SK-NIC network interface cards.

The FFT-STSS and FFT-STSR are compatible with the Fire Fighters Telephone communication system. The FFT-STSS is a surface mount door with keylock. The FFT-STSR is a`recessed mount door with keylock

The 7720P programmer or the Web-Based Program is used to enter all central-station information. This is saved to the IPGSM-COM communicator panel memory.

SK-F485C fiber to SBus converters offer a seamless conversion from panel SBus connection to fiber and back again.

L-Series low frequency compact wall sounders include a variety of features that increase their application versatility while simplifying installation.

InnovairFlex™ duct smoke detectors combine an impressive collection of innovations designed to save you time and money and provide the flexibility you need in the field.

L-Series with LED Outdoor Weatherproof horn strobes are rich with features guaranteed to cut installation costs and times with its lower current draw and modern aesthetics.

L-Series with LED Speaker Strobes are rich with features guaranteed to cut installation costs and times with its lower current draw and modern aesthetics.

Honeywell's SpectrAlert® Advance SP series speakers are dual voltage speakers designed for fire protective signaling systems.

System Sensor L-Series speakers reduce costly ground faults using a plug-in design and universal mounting plate that allow the installer to pre-wire mounting plates, dress the wires, and confirm wiring continuity before plugging in the speakers.

L-Series Outdoor Weatherproof Horns are rich with features guaranteed to cut installation costs and times with its lower current draw and modern aesthetics.

L-Series compact horns are designed to simplify installations to provide primary and secondary signaling for fire and security applications.

SpectrAlert Advance Outdoor Back Boxes ensure a NEMA 4X weatherproof listing for AV devices.

Alarms, audible and visual alarms, water flow indicators and others

System Sensor L-Series speakers reduce costly ground faults using a plug-in design and universal mounting plate that allow the installer to pre-wire mounting plates, dress the wires, and confirm wiring continuity before plugging in the speakers.

L-Series low frequency sounders include a variety of features that increase their application versatility while simplifying installation.

System Sensor L-Series low frequency sounder strobes are rich with features guaranteed to maximize profits with lower current draw and modern aesthetics.

System Sensor L-Series low frequency sounder strobes are rich with features guaranteed to maximize profits with lower current draw and modern aesthetics.

Installation/removal tools are designed for use with System Sensor® plug-in smoke detectors. They permit installation and removal of detectors in elevated mounting locations.

CO1224T carbon monoxide (CO) detectors with Real Test® use a highly accurate and reliable electrochemical sensing cell to provide an early warning of dangerous CO levels.

SK-NIC network interface cards work with fire alarm control panels (FACPs), allowing FACPs to connect to one another through broadband networks.

Heating kits for use to prevent condensation with the BEAM1224 conventional beam smoke detectors. They lessen the likelihood of condensation by maintaining the unit at a temperature that is slightly higher than the surrounding air.

FFT-24 expander boards allow an additional 24 zones to Silent Knight® fire fighters telephone control systems.

Multi-mode and single-mode fiber-optic modules are plug-in fiber loop modules that work as a single channel to transmit or receive communications with Silent Knight® network interface cards.

Backboxes are for use with fire alarm control panels (FACPs) and are used to mount up to two batteries and power supplies.

F210 flanged rings are designed for use with B210LP detector bases.

The System Sensor DH400OE-1 is a steel enclosure for mounting a standard indoor rated duct smoke detector outdoors.

Remote annunciators are designed for both conventional and intelligent applications. Their red LED provides visual indication of an alarm condition.

L-Series with LED Speaker Strobes are rich with features guaranteed to cut installation costs and times with its lower current draw and modern aesthetics.

L-Series with LED Outdoor Weatherproof strobes are rich with features guaranteed to cut installation costs and times with its lower current draw and modern aesthetics.

5600 Series mechanical heat detectors offer property protection against fire and are intended for non-life-safety installations where smoke detectors are inappropriate.

The B200SR sounder and LF sounder bases are fully compatible with existing B501BH Series sounder base installations. The device enables users to select one of two B501-supported tones (ANSI Temporal 3 or Continuous) through a jumper.

L-Series horns are designed to simplify installations to provide primary and secondary signaling for fire and security applications.

The DST family of sampling tubes are pieces of steel piping with a series of holes drilled the entire length of the tube and should extend the entire width of the duct.

i³™ Series offers conventional, photoelectric and photo/thermal smoke detectors in both 2-wire and 4-wire formats.

L-Series 4-Wire horn strobes are intended for full building notification as well as on the property ground.

Honeywell's SpectrAlert® Advance SP series speakers are dual voltage speakers designed for fire protective signaling systems.

CO detector replacement plate to cover the footprint of previously installed detectors.

L-Series Surface Mount Back Boxes are the best solution in locations where you have a hard surface to mount to.

L-Series LED 2-wire horn strobes are rich with features that increase application versatility, simplify installation, and maximize profits with lower current draw and modern aesthetics.

L-Series LED 2-wire horn strobes are rich with features that increase application versatility, simplify installation, and maximize profits with lower current draw and modern aesthetics.

DCOIL remote test coils are required for older DNR(W) duct detector housings.

L-Series 4-Wire horn strobes are intended for full building notification as well as on the property ground.

P48-21-00 end caps for metal sampling tubes are intended for use with conventional and intelligent duct smoke detectors.

SpectrAlert® outdoor selectable output speaker strobes provide a broad frequency response range, low harmonic distortion, and maintain a high sound pressure level at all tap settings to provide accurate broadcast of evacuation messages.

SpectrAlert® Advance Series horns are designed to simplify installations to provide primary and secondary signaling for fire and security applications.

L-Series selectable output chimes are private mode notification appliances used to alert trained personnel to investigate possible emergency situations.

Multi-voltage conventional relays are used for high-current switching applications such as fans and damper assembly controls, door controls, air handling unit controls, and other types of system interfacing.

L-Series with LED Outdoor Weatherproof strobes are rich with features guaranteed to cut installation costs and times with its lower current draw and modern aesthetics.

SpectrAlert® Advance Series mini-horns are designed to simplify installations to provide primary and secondary signaling for fire and security applications.

B224RB Detector Relay Bases are designed for use with 200 Series detectors, and provide a single Form C contact relay for the control of auxiliary functions, such as door closures and elevator recall.

B224BI Plug-in Isolator Detector Bases prevent an entire communications loop from being disabled when a short circuit occurs.

The SENS-RDR utilizes infrared technology to read the sensitivity of i3 and 100 Series conventional detectors.

SSM Series alarm bells are low-current, high-decibel notification appliances for use in fire and burglary systems or other signaling applications.

WTP weatherproof plates enable installers to flush-mount outdoor horns, strobes, horn strobes, speakers, and speaker strobes to a variety of wall surfaces, including brick, ceramic tile, concrete, and masonry brick.

ISO-6 six fault isolator modules provide six equivalent circuits that will allow a portion of the communications loop to continue operating when a short circuit occurs on that loop.

SK-SCK seismic compliance kits are for use with Silent Knight® fire alarm control panels (FACPs).

RBB surface-mount accessory cabinets can be used if the main control panel backup batteries are too large to fit into the main control panel cabinet.

TR-1 trim ring assemblies are for use with Gamewell-FCI® Flex 4-zone fire alarm control panels (FACPs). They allow semi-flush mounting of the cabinet. Red and black options are available.

Single Terminal Back Boxes are used for mounting RTS151 key. Remote annunciator accessories providing reset function and has a Red LED to indicate alarm conditions.

Surface backboxes are for use with Fire-Lite® BG-12LR agent release stations.

Serial and parallel gateway modules allow you to connect virtually any standard PC-compatible printer to a Silent Knight® Series fire alarm control panel (FACP) and to generate reports on site.

5820XL LED I/O driver modules provide an effective means to customize your remote annunciation. They provide LED annunciation and control inputs for the fire alarm control panel (FACP).

CB500 wiring barriers are used to separate power-limited and nonpower-limited wiring inside of junction boxes.

PAM multi-voltage relay modules are ideal for applications where remote relays are required for control or status feedback.

F110 flanges are replacements for the flanges on B400 Series detectors.

The trim rings are designed for semi-flush mounting applications, and intended for use with BG-12 Series fire alarm pull stations.

The printer is used with the Gamewell-FCI fire alarm control panels (FACPs) and provides printer capability to produce a written record of system events and status changes.

Remote mounting kits are for use with Silent Knight® 5815XL signaling line circuit (SLC) expanders.

Surface-mount trim rings are for use with Silent Knight® remote annunciators.

SB-10 surface backboxes are for use with Fire-Lite® BG-12LR agent release stations.

005860T surface-mount trim rings are for use with Silent Knight® 5860 remote annunciators. Red and gray options are available.

IDP-ACB module cabinets are for use with Silent Knight® IDP-Zone-6 interface modules. They have a built-in chassis that will accommodate one or two modules.

KILLARK® XAL-53 explosion-proof pull stations are suitable for use in hazardous areas due to the presence of flammable gases or vapors, combustible dust, or easily ignitable fibers.

005883 relay interface boards provide 10 general purpose Form C relays that can be used to control any device that requires a dry contact closure.

FFT-FPJ firefighter phone jacks provide a quick connect to the SK-FFT fire fighter telephone system using an FFT-RHS remote handset.

Expand the versatility of the InnovairFlex™ line of duct smoke detectors with System Sensor notification and test accessories.

SB-I/O surface-mount backboxes are for use with Silent Knight® PS-SA and PS-DA pull stations.

302 Series rate-anticipation heat detectors operate within a controlled range of two to three degrees of their setpoints, regardless of the rate of temperature rise. These detectors are available in either 135 °F (57.2 °C) or 194 °F (90 °C) ratings.

BAT Series batteries are Power-Sonic brand batteries. BAT series (or Power-Sonic brand) batteries are recommended for secondary power or backup power for all NOTIFIER® fire alarm control equipment.

i³™ Series offers conventional smoke detectors with sounder, relay and isolator features included.

L-Series LED strobes are rich with features that increase application versatility, simplify installation, and maximize profits with lower current draw and modern aesthetics.

L-Series with LED chime strobes are private mode notification appliances used to alert trained personnel to investigate possible emergency situations and to take appropriate action.

L-Series LED strobes are rich with features that increase application versatility, simplify installation, and maximize profits with lower current draw and modern aesthetics.

L-Series with LED chime strobes are private mode notification appliances used to alert trained personnel to investigate possible emergency situations and to take appropriate action.

FM-Series electromagnetic door holder spacers are used, when necessary, for the installation of remote door release systems.

HPTCOVER transformer enclosures are used in applications where the installation requires a plug-in transformer to be securely affixed to an AC wall outlet.

FFT-HSC Firefighter handset cabinets can hold up to 10 remote handsets.

The BB-STD is a accessory of a System Sensor.

Sync-Circuit Modules synchronize SpectrAlert Advance strobes, horns, and chimes over a single pair of wires.

L-Series trim rings provide additional space within the backbox. The design is universal across the L-series notification appliance line and supports indoor horns, horn strobes, chimes, chime strobes, strobes, speakers, and speaker strobes.

System Sensor Select Series detector color kits offer expanded color options to meet varying aesthetic applications.

L-Series universal expander plates cut costs and speed installation on emergency communications applications that require fire and emergency warnings by combining the functions of multiple devices on a single mounting plate and backbox.

Detector test magnets simplify detector testing and maintenance

AP-P adapter plates are decorative plastic adapters for mounting 302 Series detectors to four-inch outlet boxes.

SMB600 flanged surface mounting kits may be used with certain System Sensor® smoke detectors when flush or recessed mounting are not possible.

5865-3 and 5865-4 LED annunciators provide 30 programmable LEDs (15 red, 15 yellow) for maximum flexibility with the Honeywell Silent Knight® Series fire alarm control panel (FACP).