MMF-300-10 Ten-Input Monitor Module

Input monitor modules have 10 inputs and interface between a control panel and normally open contact devices in intelligent alarm systems, such as & call points, & security contacts, or flow switches. & The first address on the & module is set from 01 to 150, and the remaining modules are automatically assigned to the next nine higher addresses. Provisions are included for disabling a maximum of two unused addresses.

The supervised state (normal, open, or short) of the monitored device is sent back to the panel. A common SLC input is used for all modules, and the initiating device loops share a common supervisory supply and ground. Otherwise, each monitor operates independently from the others. Each module has panel-controlled green LED indicators. The panel can cause the LEDs to blink, latch on, or latch off.

• 10 addressable Class B or 5 addressable Class A initiating device circuits
• Removable 18 AWG (0.9 mm²) to 12 AWG (3.25 mm²) plug-in terminal blocks
• Status indicators for each point
• Unused addresses may be disabled
• Rotary address switches
• Class A or Class B operation
• Flexible mounting options
• Mounting hardware included

• UL Listed: S2424
• ULC Listed: S2424 (MMF-300-10A only)
• CSFM Approved: 7300-0075:205
• FM Approved
• MEA Approved: 55-02-E
• Listed to UL Standard 864, 9th Edition