Accessories

The Annunciator is an attractive surface-mount backbox for mounting one ACS Series Annunciator.

Annunciator Flush Box is exclusively designed for mounting annunciator modules.

Annunciator Key Switches provide access security for the control switches on the LCD-160. Key-switch kit includes key, hardware, and an annunciator label.

The Annunciator Surface Box provides for the remote mounting of one annunciator module in a surface-mount enclosure. Knockouts are provided for use with 1/ 2" (1.27 cm) conduit. The annunciator mounts directly to the ABS-1B/C without a dress plate.

B-Sized marine cabinet comes with 12 gauge steel door and 6 gauge black box. These cabinets are available with a Notifier logo.

BATTERYCABIN1

The Backbox for Programmable Universal Zone Coder(UZC-256) is used when the UZC will not fit in panel enclosure.

Backboxes are for use with fire alarm control panels (FACPs) and are used to mount up to two batteries and power supplies.

Battery Box for Batteries Larger than 25 AH

Battery Mount used with NFS-640 and NFS-3030 Only

Blank dress panel provides dead-front panel for unused tiers; covers DAA2/DAX series or AA-series amplifier.

Blank Module Dress Plate used to cover annunciator positions or panel positions and also mounts some option modules.

Blank Module Plates by Notifier are cover unused module positions in an annunciator backbox also included four stand offs which allows option modules to mount behind the black front, or inside the cabinet.

Les boîtiers arrière extérieurs SpectrAlert Advance garantissent une liste d'étanchéité NEMA 4X pour les appareils audiovisuels.

All cabinets for NOTIFIER fire alarm control panels are fabricated from 16-gauge steel. The cabinet assembly consists of two basic parts: a backbox and a locking door.

Blank plate for CA-2 chassis

Cabinet assembly consists of two basic parts a backbox and a locking door. Backbox has been engineered to offer ease-of entry for the installer. Cabinets are available in either black or red, with or without windows.

Cabinet Door Assembly for Johnson Controls CAB-4 Series cabinets. Door Assembly is available in red and black colour.

Notifer brings CAB-4 Series Audio Command Doors that are designed to be used with CA-2 chassis mounted in top two rows.

CAB-4 Series Cabinet for NOTIFIER fire alarm control panels are fabricated from 16-gauge steel

DR-B4 is Two Tiers, “B” Size CAB-4 Series Cabinet for NOTIFIER Fire Alarm control panels.

CAT 30 Lock with Key

CHS-4L chassis are for use with NOTIFIER® fire alarm control panels (FACPs). They are low-profile, 4-position chassis and mount two AA-30 amplifiers.

CHS-BH/BH1 is optional battery holder. The CHS-BH/BH1 battery chassis will hold two 12.0 AH batteries, and mounts on the left side of the chassis.

All cabinets for NOTIFIER fire alarm control panels are fabricated from 16-gauge steel. The cabinet assembly consists of two basic parts: a backbox and a locking door.

DHE - series from Notifies is a range of Door Holder Extension Rods for the DH24120 Series Electromagnetic Door Holders. The DH – Series provides a wide range of Door Holder Extension Rods with various lengths and Multiple finished.

DP-2 dead front dress panels are for use with Fire-Lite® 411UDAC fire alarm control panels (FACPs). They restrict access to the system wiring but allow access to the membrane switch panel.

DP-51050 dress panels are for use with Fire-Lite® MS-5UD/MS-10UD Series fire alarm control panels (FACPs). They restrict access to the system wiring but allow access to the membrane switch panel.

DP-9692 dress panels are for use with Fire-Lite® MS-9200UDLS fire alarm control panels (FACPs). They mount to the inside of the cabinet and restrict access to the system wiring while allowing access to the key panel.

DP-ES-R dress panels are for use with NOTIFIER® fire alarm control panels (FACPs). They mount to the inside of the cabinet and restrict access to the system wiring while allowing access to the key panel.

The DVC Series Dress Panels by NotifierR are part of Digital Voice Command or DVC.These dress panels play the role of mounting the DVC with CA-1 chassis when CMIC-1 microphone is not used.

Le dispositif d’annonce ACM-30 fournit une alerte et un contrôle modulaires et personnalisables pour les panneaux de contrôle des alarmes incendie intelligents de la série NOTIFIER INSPIRE

The Dress Panel for one touchscreen display and two ACM-30 annunciators to be mounted in a CAB-5 Series cabinet

DPA-1 is the Dress panel that can be used with the CA-1 chassis when configured with a DVC, DVC-KD, and CMIC-1.

The Dress Panel-Display allows one to four modules to be mounted in the top row of the CAB-4 Series backbox. Modules mount directly to threaded studs on the Dress Panel.

The E3 Series cabinet assembly is a compact, wall-mounted enclosure

The E3 Series® Cabinets offer a variety of cabinet options to house either the E3 Series or S3 Series fire alarm control panel systems.

EQBB backbox assemblies are for use with EQ Series cabinets. These assemblies are available in red or black and feature two, three, or four tiers.

EQDR door assemblies are for use with NOTIFIER® EQ Series cabinets. These vented doors are available in red or black, and feature two, three, or four tiers.

The Encompass Floor Pedestal Mount Kit is an accessory for Hyperspike Encompass System.

The Pole-Mount Kit is an accessory for Hyperspike Encompass System.

The Wall-Mount Kit is an accessory for Hyperspike Encompass System.

Use an End-of-Line device with control panel releasing circuits.

FHSC firefighter handset cabinets are available in recessed and surface-mount configurations.

FC-TR semi-flush mount trim rings are used with FIRE-COMMAND-25/50X voice evacuation control panels.

FM Series electromagnetic door holders are designed for virtually any remote door release application. They are primarily used to hold fire and smoke barrier doors open until released by a remote smoke detector or other switching device.

FM Series electromagnetic door holder by Fire-Lite are designed for virtually any remote door release application. They are primarily used to hold fire and smoke barrier doors open until released by a remote smoke detector or other switching device.

FM-Series electromagnetic door holder spacers are used, when necessary, for the installation of remote door release systems.

FM Series electromagnetic door holders are designed for virtually any remote door release application. They are primarily used to hold fire and smoke barrier doors open until released by a remote smoke detector or other switching device.

Fire detector protective cover helps prevent malicious or accidental false fire alarms. This unique device has helped prevent false fire alarms around the world for decades.

The Resistor R-47k is a part of Fire-Lite Communicator Accessory. It has a resistance of 47k ohms.

The D4 Series Cabinets are designed to house the Gamewell-FCI’s, E3 Series® Classic Emergency Voice Evacuation AA Series amplifiers and Honeywell Power Products’ Chassis Power Supplies. These cabinets are constructed from 16-gauge steel.

90244-L8

Honeywell Cabinate

Hyperspike Ceiling Mount Kit is an accessory for HyperSpike MA-Micro, MA-1, MA-2 loudspeakers.

The Hyperspike Speaker is a TCPA directional single mount bracket.

Intelligent Fire Integrator™ Enclosure is designed for housing components.

The NFS-320 intelligent Fire Alarm Control Panel is part of the ONYX® Series of Fire Alarm Controls from notifire.using NFS-320C, an optional ACM Series annunciator can be mounted in the same cabinet.

The DP-CFFT is a dress Plate for CFFT-1, it has one open position for mounting an ACS annunciator or a BMP-1 Blank Module Plate.

JADDR Series Doors are designed for use with the CA-2 chassis configuration. JADDR Series doors are similar to CAB-4 Series “DR” doors, but a clear window space exposes the top two tiers of the CAB-4 enclosure.

L-Series Surface Mount Back Boxes are the best solution in locations where you have a hard surface to mount to.

L-Series trim rings provide additional space within the backbox. The design is universal across the L-series notification appliance line and supports indoor horns, horn strobes, chimes, chime strobes, strobes, speakers, and speaker strobes.

L-Series universal expander plates cut costs and speed installation on emergency communications applications that require fire and emergency warnings by combining the functions of multiple devices on a single mounting plate and backbox.

MPS surface backboxes are for use with Fire-Lite® FI-MPS Conventional Series and NOTIFIER® MPS Addressable Series manual stations.

Mounting plate used to attach backboxes of listed fire alarm control panels and power supplies to the CAB-BM.

NBS-950 surface-mount boxes are for use with NOTIFIER® MPS-950B Series non-coded manual fire alarm pull stations.

Notifier Retrofit Mounting Kit is used for mounting the NCA-2 Network Control Annunciator to a DPDISP dress plate.

Replacement door used for mounting ACPS-610 (E) in a CAB-PS1 cabinet when replacing ACPS-2406

The backbox has been engineered to provide ease-of-entry for the installation of the fire alarm control panels.

The Battery Plate used to cover battery and power supply when lower position is used in backbox.

Notifier CMIC-1 Fire Alarm System Chassis With Paging Microphone, By Honeywell Is A Black Paging Microphone

The Notifier DVC Chassis are audio chassis that are a part of NotifierR DVC or Digital Voice Command series. They play a role in providing a base for installing the DVC and can be mounted into size 'B' , 'C' or 'D' CAB-4 Series cabinet.

Dress panel is used with CA-1 chassis when the CMIC-1 is not used. It Provides mounting options on right two bays for two ACS annunciators, or for blank plates.

The CFFT-1 Chassis for Firefighters’ Telephone mounts in the row directly under a DVC that is mounted in a CA-1 single row chassis.

Notifier OD2030 Hazard Siren System has a 10 digit and DTMF landline.

ONYX FirstVision™ backbox enclosure and door is used for perfect and secure mounting of ONYX FirstVision™ Interactive Firefighters’ Display system.

Backbox by Notifier has been engineered to provide ease-of entry for the installer.

The LEXAN model provides a tasteful combination to accent the decor of the finest lobby setting.

The Onyx Series Surface Mount Backboxes are an attractive range of backbox for mounting one ACS Series Annunciators. They have an increased depth that allows mounting of the AKS-1B Annunciator Key Switches.

BB-XP is an Optional cabinet for one or two modules.

Surface-mount backboxes are for use with Fire-Lite® ACM-8RF relay modules.

The RM-1 Series remote microphones can be utilized with the DVC Digital Voice Command Centre and DAA2 amplifiers, or to expand a legacy installation.

Remote Mount Configuration is used for VESDA Display Unit

Remote Notification for Xtralis VSM4 which are vesda and icam smoke and gas detection systems.

SB-SPC8 tile support brackets are designed for use with L-Series SPCW8 8-inch dual-voltage speakers. These brackets offer support for ceiling tile installations.

WA7626-CA adapter cables are used to connect GSM antennas to AlarmNet® security and fire alarm systems.

SMB500 surface-mount boxes are for use with System Sensor® modules when flush or recessed mounting is not possible.

Seismic Mounting and Bracket Kit

The semiflush-mount backboxes is used for ACS Series Annunciators. The backboxes mounts one annunciator module.

The Seismic kit is used for the Fire Voice 25/50 series, BB-100, BB-17, CAB-4 series cabinets, NFS-LBB and FCPS-24S6/8, CAB-PS1, SFP-2402 and SFP-2404.

SpectrAlert® Advance trim rings provide additional space within the backbox.

Tripod and Case is an accessory for HyperSpike HS-10 models.

Universal end-of-line (EOL) device mounting plates are used to place the EOL device at an accessible height.

The VESDA 19inch Sub rack Enclosure is designed to house up to 12 display and/or programmer modules, VESDAnet sockets, or relay only modules in a wide variety of confi gurations to suit the particular requirements of a site.

Wall Mounted Master Slave (PC - Link HLI) connects a PC and VESDA system. Each PC - Link HLI includes two cables (It does not include a PC).

VESDA MODULE DISP VN VLF

Vented Dress Panel covers the gap between the (ADP-4B) annunciator dress panel and the top of the cabinet. It secures to the cabinet with two screws.

WTP weatherproof plates enable installers to flush-mount outdoor horns, strobes, horn strobes, speakers, and speaker strobes to a variety of wall surfaces, including brick, ceramic tile, concrete, and masonry brick.

The wall-mounted cabinet for the DVCRPU has a door that provides a clear view of the interior, and is hinged downward to provide unimpeded user access from any direction.

XLS-ADDR Door Assemblies are designed for use with the CA-2 chassis configuration. XLS-ADDR Door Assemblies are available in two, three and four tiers.