005230 remote annunciators provide both trouble and alarm annunciation, and a convenient means for programming the 5104, 5204, and the 5207.
1100-0399 remote serial LCD displays are adaptable, compact keypad annunciators that can used in modular systems such as the E3 Series®, the S3 Series, and the 7100 Series.
5860 remote annunciators can be used to operate and program Honeywell Silent Knight® fire alarm control panels (FACPs) from anywhere within the system.
5865-3 and 5865-4 LED annunciators provide 30 programmable LEDs (15 red, 15 yellow) for maximum flexibility with the Honeywell Silent Knight® Series fire alarm control panel (FACP).
6855 remote annunciators are used to operate and program Honeywell Silent Knight® fire alarm control panels (FACPs) from anywhere within the system.
6860 remote annunciators are used to view system status indicators for Honeywell Silent Knight® fire alarm control panels (FACPs).
The Backlit LCD annunciator for the Notifier fire alarm control panels, or network control annunciators that support the 80-character display format. LCD annunciator may be connected onto the four-wire EIA-485 terminal port.
Honeywell ACS series annunciators provide a modular line of products for annunciation and control of the Fire-Lite intelligent and legacy addressable fire control panels. It may be located at distances of up to 6,000 feet from the panel.
Honeywell brings ACS Series Dress Panels-4B provides the cabinet mounting of one to four modules.
Flush-mount boxes are for use with Fire-Lite® ACS Series annunciators. These enclosures provide remote mounting of a single annunciator module.
The ACS-Series Annunciator and Control System provides arrays of LEDs to indicate point status, zone status, system status, and ability to perform system reset, silence, acknowledge and drill.
Honeywell provides AF-2800 series fire alarm control panel annunciator modules which have arrays of LEDs to indicate the status of circuits within the fire alarm control systems.
ANN-80 remote annunciators are compact, backlit, 80-character LCD fire annunciators that mimic the fire alarm control panel (FACP) display.
ANN-LED annunciator modules provide LED annunciation of general system faults and input zones/points when used with a compatible fire alarm control panel (FACP).
Annunciator Module, 10 Zone, 24V DC, Gray Enclosure, White Keypad
The Notifier N-ANN-LED annunciator modules provides LED annunciation of general system faults and input zones/points when used with a compatible Fire Alarm Control Panel. The N-ANN-LED is supplied with Canadian Firewarden FACPs as required by ULC.
ANN-SEC option cards provide another ANN-Bus port for more wiring flexibility and for applications requiring isolated, remote annunciation/indication.
The Annunciator provides a mappable relay output module for Fire Alarm Control Panels, and for NCA-2 Network Control Annunciators.
Annunciator Modules by Gamewell-FCI provides three LEDs for each zone: Alarm, Trouble and Supervisory & Ships with enclosure.
Notifier basic module For monitoring system is a base module for monitoring and traceability system in geo-referencing of mobile vehicles equipped with IP video BOX base module with 10 active connections.
The compact monitor speaker is a high sound quality speaker with three power adjustments and is secured with protection class IP 65 against the risks of environmental influences making it a reliable and performance efficient speaker.
Detector parallel display
EVS-RCU supervised remote command units are a combination supervised remote microphone and annunciator that is compatible with the EVS-Series Emergency Voice System.
Notifier FDU 80 Series Liquid Crystal Display are compact, cost-effective, 80-character, backlit LCD remote Fire Annunciator for use with the NOTIFIER FireWarden Fire Alarm Control Panels (FACPs).
Farenhyt Remote Annunciators can be used to operate and program the IFP-100 or IFP-1000 fire control panels. The RA 100’s keypad and display match the built in annunciator of IFP-100 control panel.
The ADEMCO 8-Zone LED Fire System Annunciator FSA-8 and 24-Zone LED Fire System Annunciator FSA-24, are add-on accessories used with certain VISTA controls to provide the ability for a fire response unit to identify the point/zone of a fire.
GFANN-80-W annunciators are compact, backlit 80-character LCD fire annunciators that mimic the fire alarm control panel (FACP) display.
Serial Annunciator Driver Modules by Gamewell-FCI are used to light a lamp or an LED in an annunciator & It also provides switched positive output per point used for the interface with building automation systems or driving relays.
The ACM-30 Annunciator provides modular customizable annunciation and control for the NOTIFIER INSPIRE Series Intelligent Fire Alarm Control Panels
The RLD mimics the display of the control panel and displays complete system point status information.
IRK Waterproof Remote Indicators are used for displaying the alarm status of a point fire detectors. The LED in the remote indicator is lights up when the detector goes into alarm.
LCD Annuciators by Honeywell are provides system status indicators for AC Power, Alarm, Trouble, Supervisory, and Alarm Silenced conditions.
LCD-80F remote annunciators are compact, cost-effective LCD remote annunciators for use with Fire-Lite® fire alarm control panels (FACPs).
LED Annunciator Module with alarm (red) indicators is used for up to 30 input zones or addressable points. N-ANN-RLED has red LEDs only for alarm communication.
LED Driver Board for Special Mimics-Vigilon Custom Mimic LED Driver Card
The 4XLM LED Interface Module supports the RZA-4X remote annunciator module.
The LDM Series lamp driver modules with a custom graphic display, provides annunciation and control for Fire Lite’s intelligent fire alarm control panels
The Lamp Driver Module with a custom graphic array used to indicate point status and, in some versions, to control the state of output points
LCD-160 is a 640-character Liquid Crystal Display (LCD) annunciator and remote control for the NOTIFIER NFS-3030/NFS2-3030
Honeywell’s MAXPRO video management system controls multiple sources of video subsystems to collect, manage and present video in a clear and concise manner.
This monitor speaker impresses by a sophisticated design and by its powerful sound. The 50W powered speaker is equipped with a high quality 2-way system and a 100V transformer with 3 power adjustments
MS Monitor Speakers impresses by a sophisticated design and by its powerful sound. Perfectly suitable for installations where high sound quality is needed.
Monitor Server Use License Kit offers license for system configuration. It uses SQL databases for a Server/Client platform including the first Client workstation with unlimited graphic maps for single E-net CPU.
The N-ANN-100 annunciators is a backlit, 80-character LCD fire annunciators that mimics the Fire Alarm Control Panel (FACP) display.
The N-ANN-80 annunciator is a compact, backlit, 80-character LCD fire annunciator that mimics the Fire Alarm Control Panel (FACP) display. It provides system status indicators for AC Power
The N-ANN-LED annunciator module provides LED annunciation of general system faults and input zones/points when used with a compatible Fire Alarm Control Panel (FACP).
NGA network graphic annunciators are used with Gamewell-FCI® E3 Series® systems and feature a bright, backlit 1/4-inch video graphics array (VGA) display.
ONYX FirstVision™ Interactive Firefighters’ Display graphically displays critical information on the origin and spread of a fire, allowing firefighters to quickly locate and extinguish it.
ONYX® Series Network Control Annunciator provides system control and display capabilities for all, or for selected network nodes. It requires a network communications module for networking.
ONYX® Series Network Control Annunciators are second-generation Network Control Annunciator provides system control and display capabilities for all, or for selected network nodes.
RA-2000 remote annunciators are used to operate and program Silent Knight® Farenhyt™ Series fire alarm control panels (FACPs).
Surface-mount backboxes are for use with Fire-Lite® ACM-8RF relay modules.
The Remote annunciator mounts on a standard single gang box, and provide LED indication of the same functions as the 4XZM zone relay module.
Remote Annunciators by Silent Knight are used to operate & program the IFP -100 OR IFP -1000 Fire Control Panels.
GWRAN Remote Annunciators by Gamewell are provides trouble and alarm information and can be used for programming.
The FireLite LED-10/IM series are compact, attractive LED-type fire annunciators designed for use with the MS-5210UD fire alarm control communicator.
Remote Repeater Terminal has a CAN-bus output to manage and supervise all the fire detection system.
Notifier Repeaters are endowed with a backlit graphic LCD display 320x240 dots. Characterized with optimal brightness and high contrast assuring clear sight in any environment light conditions. The connection with panels is performed by RS-485 port.
Honeywell's SCS series smoke control modules provides Notifier OYNX AFP-3030 panel and NCA-2 network annunciator capability to add a local or remote fire fan control panel for HVAC application.
SK-5235 remote annunciators support Silent Knight® SK-5208 fire alarm control panels (FACPs).
SK-RZA4 remote LED annunciators support Silent Knight® SK-4 fire alarm control panels (FACPs).
Sprinkler LED Board Tricolor
TR-ANN surface-mount trim rings are for use with NOTIFIER® N-ANN-100 remote fire annunciators. Red and black options are available.
WINMAGplus preconfigured PC computers have windows operating system and WINMAGplus (without license) installed and are supplied with keyboard, mouse and 24in screen , 500 GB hard disk, 4 ports: 2 x RS 232 and 2 x RS 485.
Start your search with category name, product name, part number, etc.
Copyright © 2022 Honeywell International Inc.